BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?

No donation is too small. If every visitor before 31 December gives just £5, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!



BAILII [Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback]

United Kingdom Statutory Instruments


You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The Customs Duties (Spain) Order 1988 No. 1261
URL: http://www.bailii.org/uk/legis/num_reg/1988/uksi_19881261_en.html

[New search] [Help]


Statutory Instruments

1988 No. 1261

CUSTOMS AND EXCISE

The Customs Duties (Spain) Order 1988

Made

20th July 1988

Laid before the House of Commons

20th July 1988

Coming into force

10th August 1988

The Treasury, by virtue of the powers conferred on them by section 5(2) and (3) of the European Communities Act 1972(1) and of all other powers enabling them in that behalf, on the recommendation of the Secretary of State, hereby make the following Order:-

1.-(1) This Order may be cited as the Customs Duties (Spain) Order 1988 and shall come into force on 10th August 1988.

(2) In this Order-

"beef and veal marketing year" means the marketing year determined in accordance with article 4 of Council Regulation (EEC) No. 805/68(2) (relating to the common organisation of the market in beef and veal) for products listed in article 1 to that Regulation;

"relevant goods" means goods which, at the time of their importation into the United Kingdom, are entitled to benefit from the progressive reduction of customs duties in trade between Spain and the other member States of the European Communities as constituted on 31st December 1985 by virtue of the provisions of Title II of Part Four of the Act annexed to the Treaty concerning the accession of the Kingdom of Spain and the Portuguese Republic to the European Economic Community and the European Atomic Energy Community, signed at Madrid and Lisbon on 12th June 1985, and to the Decision of the Council of the European Communities of 11th June 1985 on the accession of the Kingdom of Spain and the Portuguese Republic to the European Coal and Steel Community(3);

references to a heading or subheading are references to a heading or subheading of the Combined Nomenclature of the European Economic Community(4);

references in Schedule 1, 2 or 4 to this Order to a rate of duty, unless otherwise stated, are references to a rate calculated as a percentage of the value of the goods;

references to the weight of any goods, unless otherwise stated, are references to their net weight, and "gross" in relation to the weight of any goods means inclusive of the weight of any earth or any other growing medium in which the goods are imported and of any container in or on which they are made up;

where symbols or abbreviations are used for units of measurement they are those authorised by the Weights and Measures (Quantity Marking and Abbreviations of Units) Regulations 1987(5) except that the symbol "hl" is used for the unit "hectolitre"; and

"ECU" means European Currency Unit as defined in Council Regulation (EEC) No. 3180/78(6) and any amount expressed as a number of ECUs shall be converted to sterling at such rate as may be required by the customs rules of the European Communities(7).

(3) This Order does not impose or increase any customs duty or restrict any relief from customs duty otherwise than in pursuance of a Community obligation.

2.-(1) Subject to paragraph (2) and articles 5, 6, 7 and 8(1) below, from 10th August 1988 up to and including 31st December 1995, where in relation to any relevant goods which fall within a heading or subheading specified in column 1 of Schedule 1 to this Order a rate of customs duty is shown in column 3 as from 10th August 1988 or as from 1st January in any subsequent year, then, on the importation into the United Kingdom of any of those goods during the relevant period, there shall be charged a duty of customs at the rate so shown for that period.

(2) If the entry "O" appears in the said column 3 in relation to the goods for any period, no customs duty shall be charged on the importation into the United Kingdom of any of those goods during that period or any subsequent year.

3. Subject to article 7 below, from 10th August 1988 up to and including the day immediately preceding the day on which the beef and veal marketing year begins in 1989, where in relation to any relevant goods which fall within a subheading specified in column 1 of Schedule 2 to this Order a rate of customs duty is shown in column 2 of that Schedule in relation to that period, then, on the importation into the United Kingdom of any of those goods, there shall be charged a duty of customs at the rate so shown.

4. Subject to article 7 below, from the day on which the beef and veal marketing year begins in 1989 up to and including the day immediately preceding the day on which that year begins in 1990, and during each marketing year thereafter up to and including the day immediately preceding the day on which that marketing year begins in 1993, where in relation to any relevant goods which fall within a subheading specified in column 1 of Schedule 2 to this Order a rate of customs duty is shown in column 2 in relation to any marketing year, then, on the importation into the United Kingdom of any of those goods during that marketing year, there shall be charged a duty of customs at the rate so shown for that marketing year.

5. From 10th August 1988 up to and including 31st December 1995 no customs duty shall be charged on any relevant goods which fall within a heading or subheading specified in column 1 of Schedule 3 to this Order and are of a description specified in column 2.

6. Subject to articles 7 and 8(1) below, from 10th August 1988 up to and including 31st December 1995, where in relation to any relevant goods which fall within a subheading specified in column 1 of Schedule 4 to this Order and are of a description specified in column 2 a rate of customs duty is shown in column 3 as from 10th August

1988 or as from 1st January in any subsequent year, then, on the importation into the United Kingdom of any of those goods during the relevant period, there shall be charged a duty of customs at the rate so shown for that period instead of any higher rate shown in column 3 of Schedule 1 in relation to the goods in respect of that period.

7. In the case of any goods to which articles 2, 3, 4 or 6 applies, where in accordance with any directly applicable Community provision the rate of duty chargeable is lower than the rate chargeable under those articles or is nil, customs duty shall be chargeable on the importation of the goods into the United Kingdom at the lower rate.

8.-(1) Where a period of time or a description of goods is specified in column 2 of Schedule 1 or 4 to this Order in relation to any heading or subheading, the duty provided for in relation to that heading or subheading by article 2 or 6 above shall apply only during that period or to goods of that description as the case may be.

(2) Any description of goods in column 2 of Schedule 1, 3 or 4 to this Order shall be taken to comprise all goods which would be classified under an entry in the same terms constituting a subheading.

Tony Durant

Mark Lennox-Boyd

Two of the Lords Commissioners of Her Majesty's Treasury

20th July 1988

Article 2

SCHEDULE 1CUSTOMS DUTIES

Combined nomenclature codeDescription of GoodsRates of duty
(1)(2)(3)
as from 10.8.88as from 1.1.89as from 1.1.90as from 1.1.91as from 1.1.92as from 1.1.93as from 1.1.94as from 1.1.95
Chapter 1
0101 19 102.521.510.50
0101 19 9011.296.74.52.20
0101 20 107.564.531.50
0101 20 9010.68.56.34.22.10
0102 90 101086420
0102 90 311086420
0102 90 331086420
0102 90 351086420
0102 90 371086420
0104 20 103.12.51.81.20.60
0106 00 103.732.21.50.70
0106 00 206.253.72.51.20
Chapter 2
0201 10 1012.5107.552.50
0201 10 9012.5107.552.50
0201 20 1112.5107.552.50
0201 20 1912.5107.552.50
0201 20 3112.5107.552.50
0201 20 3912.5107.552.50
0201 20 5112.5107.552.50
0201 20 5912.5107.552.50
0201 20 9012.5107.552.50
0201 30 0012.5107.552.50
0202 10 0012.5107.552.50
0202 20 1012.5107.552.50
0202 20 3012.5107.552.50
0202 20 5012.5107.552.50
0202 20 9012.5107.552.50
0202 30 1012.5107.552.50
0202 30 5012.5107.552.50
0202 30 9012.5107.552.50
0203 11 901.81.51.10.70.30
0203 12 901.81.51.10.70.30
0203 19 901.81.51.10.70.30
0203 21 901.81.51.10.70.30
0203 22 901.81.51.10.70.30
0203 29 901.81.51.10.70.30
0205 00 00543210
0206 10 914.33.52.61.70.80
0206 10 9512.5107.552.50
0206 10 992.521.510.50
0206 21 002.521.510.50
0206 22 904.33.52.61.70.80
0206 29 9112.5107.552.50
0206 29 992.521.510.50
0206 30 901.81.51.10.70.30
0206 41 991.81.51.10.70.30
0206 49 991.81.51.10.70.30
0206 80 916.253.72.51.20
0206 80 991.81.51.10.70.30
0206 90 916.253.72.51.20
0206 90 991.81.51.10.70.30
0208 10 103.12.51.81.20.60
0208 10 900.90.70.50.30.10
0208 20 003.12.51.81.20.60
0208 90 103.12.51.81.20.60
0208 90 300.90.70.50.30.10
0208 90 50
Whalemeat3.12.51.81.20.60
Other4.33.52.61.70.80
0210 11 9015129630
0210 12 9015129630
0210 19 9015129630
0210 20 1015129630
0210 20 9015129630
0210 90 1015129630
0210 90 2015129630
0210 90 4115129630
0210 90 4912.5107.552.50
0210 90 6015129630
0210 90 8015129630
0210 90 9012.5107.552.50
Chapter 3
0301 10 909.37.55.63.70
0301 91 007.564.530
0301 93 005430
0302 11 007.564.530
0302 21 305430
0302 21 909.37.55.63.70
0302 22 009.37.55.63.70
0302 23 009.37.55.63.70
0302 29 009.37.55.63.70
0302 31 9013.7118.25.52.70
0302 32 9013.7118.25.52.70
0302 33 9013.7118.25.52.70
0302 39 9013.7118.25.52.70
0302 40 909.37.55.63.70
0302 50 107.564.530
0302 50 907.564.530
0302 61 1014.311.58.65.72.80
0302 61 309.37.55.63.70
0302 61 998.16.54.83.20
0302 62 009.37.55.63.70
0302 63 009.37.55.63.70
0302 64 9012.5107.552.50
0302 65 105430
0302 65 905430
0302 61 115430
0302 69 2513.7118.25.52.70
0302 69 315430
0302 69 335430
0302 69 357.564.530
0302 69 419.37.55.63.70
0302 69 459.37.55.63.70
0302 69 519.37.55.63.70
0302 69 559.37.55.63.70
0302 69 619.37.55.63.70
0302 69 659.37.55.63.70
0302 69 719.37.55.63.70
0302 69 759.37.55.63.70
0302 69 819.37.55.63.70
0302 69 859.37.55.63.70
0302 70 006.253.72.50
0303 21 007.564.530
0303 31 305430
0303 31 909.37.55.63.70
0303 32 009.37.55.63.70
0303 33 009.37.55.63.70
0303 39 109.37.55.63.70
0303 39 909.37.55.63.70
0303 41 9013.7118.25.52.70
0303 42 9013.7118.25.52.70
0303 43 9013.7118.25.52.70
0303 49 9013.7118.25.52.70
0303 50 909.37.55.63.70
0303 60 107.564.530
0303 60 909.37.55.63.70
0303 71 1014.311.58.65.72.80
0303 71 309.37.55.63.70
0303 71 998.16.54.83.20
0303 72 009.37.55.63.70
0303 73 009.37.55.63.70
0303 74 1912.5107.552.50
0303 74 909.37.55.63.70
0303 75 105430
0303 75 905430
0303 77 009.37.55.63.70
0303 78 109.37.55.63.70
0303 78 909.37.55.63.70
0303 79 115430
0303 79 3113.7118.25.52.70
0303 79 355430
0303 79 375430
0303 79 417.564.530
0303 79 459.37.55.63.70
0303 79 519.37.55.63.70
0303 79 559.37.55.63.70
0303 79 6312.5107.552.50
0303 79 659.37.55.63.70
0303 79 719.37.55.63.70
0303 79 739.37.55.63.70
0303 79 759.37.55.63.70
0303 79 819.37.55.63.70
0303 79 839.37.55.63.70
0303 79 999.37.55.63.70
0303 80 006.253.72.50
0304 10 117.564.530
0304 10 3111.296.74.50
0304 10 3911.296.74.50
0304 20 117.564.530
0304 20 219.37.55.63.70
0304 20 299.37.55.63.70
0304 20 319.37.55.63.70
0304 20 339.37.55.63.70
0304 20 357.564.530
0304 20 377.564.530
0304 20 419.37.55.63.70
0304 20 439.37.55.63.70
0304 20 4511.296.74.52.20
0304 20 519.37.55.63.70
0304 20 539.37.55.63.70
0304 20 579.37.55.63.70
0304 20 599.37.55.63.70
0304 20 619.37.55.63.70
0304 20 699.37.55.63.70
0304 20 719.37.55.63.70
0304 20 739.37.55.63.70
0304 20 759.37.55.63.70
0304 20 799.37.55.63.70
0304 20 819.37.55.63.70
0304 20 839.37.55.63.70
0304 20 999.37.55.63.70
0304 90 259.37.55.63.70
0304 90 315430
0304 90 359.37.55.63.70
0304 90 377.564.530
0304 90 419.37.55.63.70
0304 90 459.37.55.63.70
0304 90 479.37.55.63.70
0304 90 499.37.55.63.70
0304 90 519.37.55.63.70
0304 90 559.37.55.63.70
0304 90 579.37.55.63.70
0304 90 599.37.55.63.70
0304 90 999.37.55.63.70
0305 10 008.16.54.83.20
0305 20 006.85.54.12.70
0305 30 11108640
0305 30 309.37.55.63.70
0305 30 509.37.55.63.70
0305 30 90108640
0305 41 008.16.54.83.20
0305 42 006.253.72.50
0305 49 109.37.55.63.70
0305 49 20108640
0305 49 308.775.23.50
0305 49 408.775.23.50
0305 49 508.775.23.50
0305 49 908.775.23.50
0305 59 307.564.530
0305 59 506.253.72.50
0305 59 607.564.530
0305 59 709.37.55.63.70
0305 59 909.37.55.63.70
0305 61 007.564.530
0305 63 00In barrels not exceeding 10 Kgs net weight3.12.50
Other6.253.72.50
0305 69 207.564.530
0305 69 309.37.55.63.70
0305 69 506.85.54.12.70
0305 69 907.564.530
0306 11 007.86.24.63.10
0306 13 107.564.530
0306 13 3011.296.74.52.20
0306 13 9011.296.74.52.20
0306 14 105430
0306 14 309.37.55.63.70
0306 14 909.37.55.63.70
0306 19 109.37.55.63.70
0306 19 307.564.530
0306 19 907.564.530
0306 21 007.86.24.63.10
0306 23 107.564.530
0306 23 3111.296.74.52.20
0306 23 3911.296.74.52.20
0306 23 9011.296.74.52.20
0306 24 105430
0306 24 309.37.55.63.70
0306 24 909.37.55.63.70
0306 29 109.37.55.63.70
0306 29 307.564.530
0306 29 907.564.530
0307 10 9011.296.74.52.20
0307 21 005430
0307 29 105430
0307 29 905430
0307 31 104.63.72.80
0307 31 905430
0307 39 104.63.72.80
0307 39 905430
0307 41 105430
0307 41 913.732.20
0307 41 995430
0307 49 115430
0307 49 195430
0307 49 313.732.20
0307 49 333.732.20
0307 49 393.732.20
0307 49 513.732.20
0307 49 595430
0307 49 715430
0307 49 913.732.20
0307 49 995430
0307 51 005430
0307 59 105430
0307 59 905430
0307 99 115430
0307 99 135430
0307 99 195430
0307 99 905430
Chapter 4
0403 10 517.564.531.50
0403 10 537.564.531.50
0403 10 597.564.531.50
0403 10 91543210
0403 10 93543210
0403 10 99543210
0403 90 717.564.531.50
0403 90 737.564.531.50
0403 90 797.564.531.50
0403 90 91543210
0403 90 93543210
0403 90 99543210
0407 00 90543210
0409 00 0016.813.510.16.73.30
0410 00 007.564.531.50
Chapter 5
0505 10 900.80.70.50.30.10
0505 90 000.50.40.30.20.10
0509 00 902.01.61.20.80.40
Chapter 6
0601 10 10543210
0601 10 20543210
0601 10 30543210
0601 10 40543210
0601 10 90543210
0601 20 101.210.70.50.20
0601 20 309.37.55.63.71.80
0601 20 906.253.72.51.20
0602 10 90543210
0602 20 101.81.51.10.70.30
0602 20 918.16.54.83.21.60
0602 20 998.16.54.83.21.60
0602 30 108.16.54.83.21.60
0602 30 908.16.54.83.21.60
0602 40 118.16.54.83.21.60
0602 40 198.16.54.83.21.60
0602 40 908.16.54.83.21.60
0602 91 008.16.54.83.21.60
0602 99 308.16.54.83.21.60
0602 99 418.16.54.83.21.60
0602 99 458.16.54.83.21.60
0602 99 498.16.54.83.21.60
0602 99 518.16.54.83.21.60
0602 99 598.16.54.83.21.60
0602 99 708.16.54.83.21.60
0602 99 918.16.54.83.21.60
0602 99 998.16.54.83.21.60
0603 10 1115129630
0603 10 1315129630
0603 10 1515129630
0603 10 2115129630
0603 10 2515129630
0603 10 2915129630
0603 10 5110.68.56.34.22.10
0603 10 5310.68.56.34.22.10
0603 10 5510.68.56.34.22.10
0603 10 6110.68.56.34.22.10
0603 10 6510.68.56.34.22.10
0603 10 6910.68.56.34.22.10
0603 90 0012.5107.552.50
0604 10 902.521.510.50
0604 91 106.253.72.51.20
0604 91 906.253.72.51.20
0604 99 102.521.510.50
0604 99 9010.68.56.34.22.10
Chapter 7
0701 10 004.33.52.61.70.80
0701 90 105.64.53.32.21.10
0701 90 519.37.55.63.71.80
0701 90 5913.110.57.85.22.60
0701 90 9011.296.74.52.20
0702 00 10From 1 Nov to 31 Dec7.2% subject to a minimum of 1.4 ECU per 100 kg6.6% subject to a minimum of 1.2 ECU per 100 kg3.8% subject to a minimum of 0.7 ECU per 100 kg2.2% subject to a minimum of 0.4 ECU per 100 kg1.7% subject to a minimum of 0.3 ECU per 100 kg1.3% subject to a minimum of 0.2 ECU per 100 kg0.8% subject to a minimum of 0.1 ECU per 100 kg0.4%
From 1 Jan to end of Feb3.8% subject to a minimum of 0.7 ECU per 100 kg3.3% subject to a minimum of 0.6 ECU per 100 kg1.9% subject to a minimum of 0.3 ECU per 100 kg1.1% subject to a minimum of 0.2 ECU per 100 kg0.8% subject to a minimum of 0.1 ECU per 100 kg0.6% subject to a minimum of 0.1 ECU per 100 kg0.4%0.2%
From 1 March to 14 May7.7% subject to a minimum of 1.4 ECU per 100 kg6.6% subject to a minimum of 1.2 ECU per 100 kg3.8% subject to a minimum of 0.7 ECU per 100 kg2.2% subject to a minimum of 0.4 ECU per 100 kg1.7% subject to a minimum of 0.3 ECU per 100 kg1.3% subject to a minimum of 0.2 ECU per 100 kg0.8% subject to a minimum of 0.1 ECU per 100 kg0.4%
0703 00 90From 15 May to 31 October12.6% subject to a minimum of 2.4 ECU per 100 kg10.8% subject to a minimum of 2.1 ECU per 100 kg6.3% subject to a minimum of 1.2 ECU per 100 kg3.6% subject to a minimum of 0.7 ECU per 100 kg2.8% subject to a minimum of 0.5 ECU per 100 kg2.1% subject to a minimum of 0.4 ECU per 100 kg1.4% subject to a minimum of 0.2 ECU per 100 kg0.7% subject to a minimum of 0.1 ECU per 100 kg
0703 10 118.77.66.55.44.33.22.11
0703 10 198.77.66.55.44.33.22.11
0703 10 908.77.66.55.44.33.22.11
0703 20 008.77.66.55.44.33.22.11
0703 90 009.48.275.94.73.52.31.1
0704 10 1012.3% subject to a minimum of 1.4 ECU per 100 kg10.8% subject to a minimum of 1.2 ECU per 100 kg9.2% subject to a minimum of 1 ECU per 100 kg7.7% subject to a minimum of 0.9 ECU per 100 kg6.1% subject to a minimum of 0.7 ECU per 100 kg4.6% subject to a minimum of 0.5 ECU per 100 kg3% subject to a minimum of 0.3 ECU per 100 kg1.5% subject to a minimum of 0.1 ECU per 100 kg
0704 10 908.7% subject to a minimum of 1 ECU per 100 kg7.6% subject to a minimum of 0.8 ECU per 100 kg6.5% subject to a minimum of 0.7 ECU per 100 kg5.4% subject to a minimum of 0.6 ECU per 100 kg4.3% subject to a minimum of 0.5 ECU per 100 kg3.2% subject to a minimum of 0.3 ECU per 100 kg2.1% subject to a minimum of 0.2 ECU per 100 kg1% subject to a minimum of 0.1 ECU per 100 kg
0704 20 0010.9%9.5%8.1%6.8%5.4%4%2.7%1.3%
0704 90 1010.9% subject to a minimum of 0.3 ECU per 100 kg9.5% subject to a minimum of 0.3 ECU per 100 kg8.1% subject to a minimum of 0.2 ECU per 100 kg6.8% subject to a minimum of 0.2 ECU per 100 kg5.4% subject to a minimum of 0.1 ECU per 100 kg4.1% subject to a minimum of 0.1 ECU per 100 kg2.7%1.3%
0704 90 9010.9%9.5%8.1%6.8%5.4%4%2.7%1.3%
0705 11 1010.5% subject to a minimum of 1.7 ECU per 100 kg9.0% subject to a minimum of 1.5 ECU per 100 kg5.2% subject to a minimum of 0.8 ECU per 100 kg3% subject to a minimum of 0.5 ECU per 100 kg2.4% subject to a minimum of 0.4 ECU per 100 kg1.8% subject to a minimum of 0.3 ECU per 100 kg1.2% subject to a minimum of 0.2 ECU per 100 kg0.6% subject to a minimum of 0.1 ECU per 100 kg
0705 11 909.1% subject to a minimum of 1.1 ECU per 100 kg7.8% subject to a minimum of 0.9 ECU per 100 kg4.5%ct to a minimum of 0.5 ECU per 100 kg2.6% subject to a minimum of 0.3 ECU per 100 kg2% subject to a minimum of 0.2 ECU per 100 kg1.5% subject to a minimum of 0.1 ECU per 100 kg1% subject to a minimum of 0.1 ECU per 100 kg0.5%
0705 19 009.48.275.94.73.52.31.1
0705 21 009.48.275.94.73.52.31.1
0705 29 009.48.275.94.73.52.31.1
0706 10 0012.310.89.27.76.14.631.5
0706 90 119.48.275.94.73.52.31.1
0706 90 1912.310.89.27.76.14.631.5
0706 90 3010.99.58.16.85.442.71.3
0706 90 9012.310.89.27.76.14.631.3
0707 00 1111.29.65.63.22.51.91.20.6
0707 00 191412743.22.41.60.8
0707 00 9011.610.18.77.25.84.32.81.4
0708 10 107.26.35.44.53.62.71.80.9
0708 10 9012.310.89.27.76.14.631.5
0708 20 109.4% subject to a minimum of 1.4 ECU per 100 kg8.2% subject to a minimum of 1.2 ECU per 100 kg7% subject to a minimum of 1 ECU per 100 kg5.9% subject to a minimum of 0.9 ECU per 100 kg4.7% subject to a minimum of 0.7 ECU per 100 kg3.5% subject to a minimum of 0.5 ECU per 100 kg2.3% subject to a minimum of 0.3 ECU per 100 kg1.1% subject to a minimum of 0.1 ECU per 100 kg
0708 20 9012.3% subject to a minimum of 1.4 ECU per 100 kg10.8% subject to a minimum of 1.2 ECU per 100 kg9.2% subject to a minimum of 1 ECU per 100 kg7.7% subject to a minimum of 0.9 ECU per 100 kg6.1% subject to a minimum of 0.7 ECU per 100 kg4.6% subject to a minimum of 0.5 ECU per 100 kg3% subject to a minimum of 0.3 ECU per 100 kg1.5% subject to a minimum of 0.1 ECU per 100 kg
0708 90 00Vicia Saba Mayo7.16.25.34.43.52.61.70.8
Other10.18.97.66.353.82.51.2
0709 10 009.17.84.52.621.510.5
0709 20 0011.610.18.77.25.84.32.81.4
0709 30 0011.29.65.63.22.51.91.20.6
0709 40 0011.610.18.77.25.84.32.81.4
0709 51 1011.610.18.77.25.84.32.81.4
0709 51 302.92.52.11.81.410.70.3
0709 51 5054.43.83.12.51.91.20.6
0709 51 905.854.33.62.92.11.40.7
0709 52 005.854.33.62.92.11.40.7
0709 60 104.543.42.82.21.71.10.5
0709 60 993.12.51.81.20.60
0709 70 009.48.275.94.73.52.31.1
0709 90 109.48.275.94.73.52.31.1
0709 90 206.65.74.94.13.32.41.60.8
0709 90 314.33.52.61.70.80
0709 90 4054.43.83.12.51.91.20.6
0709 90 507.26.35.44.53.62.71.80.9
0709 90 7011.29.65.63.22.51.91.20.6
0709 90 90Parsley8.17.16.154321
Other11.610.18.77.25.84.32.81.4
0710 10 0011.296.74.52.20
0710 21 0011.296.74.52.20
0710 22 0011.296.74.52.20
0710 29 0011.296.74.52.20
0710 30 0011.296.74.52.20
0710 40 00543210
0710 80 1011.89.57.14.72.30
0710 80 5111.296.74.52.20
0710 80 593.12.51.81.20.60
0710 80 6011.296.74.52.20
0710 80 7011.296.74.52.20
0710 80 8011.296.74.52.20
0710 80 9011.296.74.52.20
0710 90 0011.296.74.52.20
0711 10 005.64.53.32.21.10
0711 20 10543210
0711 30 003.732.21.50.70
0711 40 009.37.55.63.71.80
0711 90 30543210
0711 90 507.564.531.50
0711 90 707.564.531.50
0711 90 909.37.55.63.71.80
0712 10 001086420
0712 20 001086420
0712 30 001086420
0712 90 301086420
0712 90 501086420
0712 90 901086420
0713 10 110.90.70.50.30.10
0713 10 190.90.70.50.30.10
0713 10 900.90.70.50.30.10
0713 20 100.90.70.50.30.10
0713 20 900.90.70.50.30.10
0713 31 100.90.70.50.30.10
0713 31 900.90.70.50.30.10
0713 32 100.90.70.50.30.10
0713 32 900.90.70.50.30.10
0713 33 100.90.70.50.30.10
0713 33 900.90.70.50.30.10
0713 39 100.90.70.50.30.10
0713 39 900.90.70.50.30.10
0713 40 100.60.50.30.20.10
0713 40 900.60.50.30.20.10
0713 50 101.51.20.90.60.30
0713 50 901.51.20.90.60.30
0713 90 101.51.20.90.60.30
0713 90 901.51.20.90.60.30
0714 20 000.90.70.50.30.10
0714 90 900.90.70.50.30.10
Chapter 8
0801 10 100.60.40.30.20.10
0801 10 900.60.40.30.20.10
0802 11 9054.43.83.12.51.91.20.6
0802 12 9054.43.83.12.51.91.20.6
0802 21 002.92.52.11.81.410.70.3
0802 22 002.92.52.11.81.410.70.3
0802 31 002.92.52.11.81.410.70.3
0802 32 002.92.52.11.81.410.70.3
0802 40 0054.43.83.12.51.91.20.6
0802 50 001.41.210.90.70.50.30.1
0802 90 300.90.70.50.30.10
0802 90 902.92.52.11.81.410.70.3
0803 00 1012.5107.552.50
0803 00 9012.5107.552.50
0804 10 003.732.21.50.70
0804 20 103.53.12.62.21.71.30.80.4
0804 20 906.253.72.51.20
0804 30 005.64.53.32.21.10
0804 40 101.210.70.50.20
0804 40 902.521.510.50
0804 50 001.81.51.10.70.30
0805 10 115.44.62.71.51.20.90.60.3
0805 10 155.44.62.71.51.20.90.60.3
0805 10 195.44.62.71.51.20.90.60.3
0805 10 212.52.11.20.70.50.40.20.1
0805 10 252.52.11.20.70.50.40.20.1
0805 10 292.52.11.20.70.50.40.20.1
0805 10 311.61.40.80.40.30.20.10
0805 10 351.61.40.80.40.30.20.10
0805 10 391.61.40.80.40.30.20.10
0805 10 418.47.24.22.41.91.40.90.4
0805 10 458.47.24.22.41.91.40.90.4
0805 10 498.47.24.22.41.91.40.90.4
0805 10 70Fresh6.55.74.943.22.41.60.8
Other10.99.58.16.85.442.71.3
0805 10 90Fresh8.77.66.55.44.33.22.11
Other14.512.710.997.25.43.61.8
0805 20 10Fresh8.47.24.22.41.91.40.90.4
Other14.512.710.997.25.43.61.8
0805 20 30Fresh8.47.24.22.41.91.40.90.4
Other14.512.710.997.25.43.61.8
0805 20 30Fresh8.47.24.22.41.91.40.90.4
Other14.512.710.997.25.43.61.8
0805 20 50Fresh8.47.24.22.41.91.40.90.4
Other14.512.710.997.25.43.61.8
0805 20 70Fresh8.47.24.22.41.91.40.90.4
Other14.512.710.997.25.43.61.8
0805 20 90Fresh8.47.24.22.41.91.40.90.4
Other14.512.710.997.25.43.61.8
0805 30 10Fresh3.32.81.60.90.70.50.30.1
Other5.854.33.62.92.10.60.3
0805 30 9011.610.18.77.25.84.32.81.4
0805 40 002.10
0805 90 0011.610.18.77.25.84.32.81.4
0806 10 11From 1 December to 31 December763.521.61.20.80.4
From 1 January to 31 January3.531.710.80.60.40.2
0806 10 15From 1 February to 31 March12.610.86.33.62.82.11.40.7
From 1 April to 14 July6.35.43.11.81.410.70.3
From 1 November to 31 December12.610.86.33.62.82.11.40.7
0806 10 1915.413.27.74.43.52.61.70.8
0806 10 91From 1 November to 31 December11.296.74.52.20
From 1 January to 31 March5.64.53.32.21.10
From 1 April to 14 July11.296.74.52.20
0806 10 9913.7118.25.52.70
0806 20 111.81.51.10.70.30
0806 20 191.81.51.10.70.30
0806 20 911.81.51.10.70.30
0806 20 991.81.51.10.70.30
0807 10 107.96.95.94.93.92.91.90.9
0807 10 907.96.95.94.93.92.91.90.9
0807 20 002.11.91.61.310.80.50.2
0808 10 106.3% subject to a minimum of 0.2 ECU per 100 kg5.4% subject to a minimum of 0.2 ECU per 100 kg3.1% subject to a minimum of 0.1 ECU per 100 kg1.8%1.4%1%0.7%0.3%
0808 10 919.8% subject to a minimum of 1.6 ECU per 100 kg8.4% subject to a minimum of 1.4 ECU per 100 kg4.9% subject to a minimum of 0.8 ECU per 100 kg2.8% subject to a minimum of 0.4 ECU per 100 kg2.2% subject to a minimum of 0.3 ECU per 100 kg1.6% subject to a minimum of 0.2 ECU per 100 kg1.1% subject to a minimum of 0.1 ECU per 100 kg0.5%
0808 10 935.6% subject to a minimum of 1.6 ECU per 100 kg4.8% subject to a minimum of 1.3 ECU per 100 kg2.8 subject to a minimum of 0.8 ECU per 100 kg1.6 subject to a minimum of 0.4 ECU per 100 kg1.2 subject to a minimum of 0.3 ECU per 100 kg0.9 subject to a minimum of 0.2 ECU per 100 kg0.6 subject to a minimum of 0.1 ECU per 100 kg0.3%
0808 10 994.2% subject to a minimum of 0.9 ECU per 100 kg3.6% subject to a minimum of 0.8 ECU per 100 kg2.1% subject to a minimum of 0.4 ECU per 100 kg1.2% subject to a minimum of 0.2 ECU per 100 kg0.9% subject to a minimum of 0.2 ECU per 100 kg0.7% subject to a minimum of 0.1 ECU per 100 kg0.4% subject to a minimum of 0.1 ECU per 100 kg0.2%
0808 20 106.3% subject to a minimum of 0.2 ECU per 100 kg5.4% subject to a minimum of 0.2 ECU per 100 kg3.1% subject to a minimum of 0.1 ECU per 100 kg1.8%1.4%1%0.7%0.3%
0808 20 317% subject to a minimum of 1 ECU per 100 kg6% subject to a minimum of 0.9 ECU per 100 kg3.5% subject to a minimum of 0.5 ECU per 100 kg2% subject to a minimum of 0.3 ECU per 100 kg1.6% subject to a minimum of 0.2 ECU per 100 kg1.2% subject to a minimum of 0.1 ECU per 100 kg0.8% subject to a minimum of 0.1 ECU per 100 kg0.4%
0808 20 333.5% subject to a minimum of 1.4 ECU per 100 kg3% subject to a minimum of 1.2 ECU per 100 kg1.7% subject to a minimum of 0.7 ECU per 100 kg1% subject to a minimum of 0.4 ECU per 100 kg0.8% subject to a minimum of 0.3 ECU per 100 kg0.6% subject to a minimum of 0.2 ECU per 100 kg0.4% subject to a minimum of 0.1 ECU per 100 kg0.2%
0808 20 357% subject to a minimum of 1 ECU per 100 kg6% subject to a minimum of 0.9 ECU per 100 kg3.5% subject to a minimum of 0.5 ECU per 100 kg2% subject to a minimum of 0.3 ECU per 100 kg1.6% subject to a minimum of 0.2 ECU per 100 kg1.2% subject to a minimum of 0.1 ECU per 100 kg0.8% subject to a minimum of 0.1 ECU per 100 kg0.4%
0808 20 399.1% subject to a minimum of 1.4 ECU per 100 kg7.8% subject to a minimum of 1.2 ECU per 100 kg4.5% subject to a minimum of 0.7 ECU per 100 kg2.6% subject to a minimum of 0.4 ECU per 100 kg2% subject to a minimum of 0.3 ECU per 100 kg1.5% subject to a minimum of 0.2 ECU per 100 kg1% subject to a minimum of 0.1 ECU per 100 kg0.5%
0808 20 904.543.42.82.21.71.10.5
0809 10 0017.5158.754321
0809 20 1010.5% subject to a minimum of 2.1 ECU per 100 kg9% subject to a minimum of 1.8 ECU per 100 kg5.2% subject to a minimum of 1 ECU per 100 kg3% subject to a minimum of 0.6 ECU per 100 kg2.4% subject to a minimum of 0.4 ECU per 100 kg1.8% subject to a minimum of 0.3 ECU per 100 kg1.2% subject to a minimum of 0.2 ECU per 100 kg0.6% subject to a minimum of 0.1 ECU per 100 kg
0809 20 9010.595.232.41.81.20.6
0809 30 0015.413.27.74.43.52.61.70.8
0809 40 1110.5% subject to a minimum of 2.1 ECU per 100 kg9% subject to a minimum of 1.8 ECU per 100 kg5.2% subject to a minimum of 1 ECU per 100 kg3% subject to a minimum of 0.6 ECU per 100 kg2.4% subject to a minimum of 0.4 ECU per 100 kg1.8% subject to a minimum of 0.3 ECU per 100 kg1.2% subject to a minimum of 0.2 ECU per 100 kg0.6% subject to a minimum of 0.1 ECU per 100 kg
0809 40 195.64.82.81.61.20.90.60.3
0809 40 9010.99.58.16.85.442.71.3
0810 10 1011.6% subject to a minimum of 2.1 ECU per 100 kg10.1% subject to a minimum of 1.9 ECU per 100 kg8.7% subject to a minimum of 1.6 ECU per 100 kg7.2% subject to a minimum of 1.3 ECU per 100 kg5.8% subject to a minimum of 1 ECU per 100 kg4.3% subject to a minimum of 0.8 ECU per 100 kg2.8% subject to a minimum of 0.5 ECU per 100 kg1.4% subject to a minimum of 0.2 ECU per 100 kg
0810 10 9010.18.97.66.353.82.51.2
0810 20 107.96.95.94.93.92.91.90.9
0810 20 908.77.66.55.44.33.22.11
0810 30 107.96.95.94.93.92.91.90.9
0810 30 307.96.95.94.93.92.91.90.9
0810 30 908.77.66.55.44.33.22.11
0810 40 302.92.52.11.81.410.70.3
0810 40 502.92.52.11.81.410.70.3
0810 40 908.77.66.55.44.33.22.11
0810 90 107.96.95.94.93.92.91.90.9
0810 90 90Pomegranates5.54.84.13.42.721.30.6
Other7.96.95.94.93.92.91.90.9
0811 10 1116.2139.76.53.20
0811 10 1916.2139.76.53.20
0811 10 9011.296.74.52.20
0811 20 1116.2139.76.53.20
0811 20 1916.2139.76.53.20
0811 20 3111.296.74.52.20
0811 20 3911.296.94.52.20
0811 20 519.37.55.63.71.80
0811 20 599.37.55.63.71.80
0811 20 9011.296.74.52.20
0811 90 1016.2139.76.53.20
0811 90 3016.2139.76.53.20
0811 90 509.37.55.63.71.80
0811 90 702.521.510.50
0811 90 9011.296.74.52.20
0812 10 006.85.54.12.71.30
0812 20 006.85.54.12.71.30
0812 90 101086420
0812 90 201086420
0812 90 303.42.721.30.60
0812 90 40543210
0812 90 506.85.54.12.71.30
0812 90 606.85.54.12.71.30
0812 90 906.85.54.12.71.30
0813 10 002.11.71.10.80.40
0813 20 007.564.531.50
0813 30 002.521.510.50
0813 40 102.11.71.10.80.40
0813 40 302.521.510.50
0813 40 500.90.70.50.30.10
0813 40 901.81.51.10.70.30
0813 50 112.521.510.50
0813 50 197.564.531.50
0814 40 001.210.70.50.20
Chapter 9
0901 11 003.12.51.81.20.60
0901 12 008.16.54.83.21.60
0901 21 009.37.55.63.71.80
0901 22 0011.296.74.52.20
0901 30 008.16.54.83.21.60
0901 40 0011.296.74.52.20
0902 10 001.51.20.90.60.30
0902 30 001.51.20.90.60.30
0904 11 903.12.51.81.20.60
0904 12 003.83.12.31.50.70
0904 20 107.564.531.50
0904 20 393.12.51.81.20.60
0904 20 903.732.21.50.70
0905 00 007.15.74.32.81.40
0906 10 00543210
0906 20 006.253.72.51.20
0907 00 009.37.55.63.71.80
0908 10 906.253.72.51.20
0908 20 90543210
0909 10 101.51.20.90.60.30
0909 10 907.15.74.32.81.40
0909 30 191.51.20.90.60.30
0909 30 903.12.51.81.20.60
0909 40 191.51.20.90.60.30
0909 40 903.12.51.81.20.60
0909 50 191.51.20.90.60.30
0909 50 903.12.51.81.20.60
0910 20 10543210
0910 20 905.94.73.52.31.10
0910 40 134.33.52.61.70.80
0910 40 195.34.23.12.110
0910 40 904.33.52.61.70.80
0910 91 106.253.72.51.20
0910 91 907.86.24.63.11.50
0910 99 916.253.72.51.20
0910 99 997.86.24.63.11.50
Chapter 10
1001 90 1012.5107.552.50
1006 10 107.564.531.50
Chapter 11
1105 10 0011.89.57.14.72.30
1105 20 0011.89.57.14.72.30
1106 10 003.732.21.50.70
1106 30 105.34.23.12.110
1106 30 9043.22.41.60.80
1108 20 009.37.55.63.71.80
Chapter 12
1208 10 0054.43.83.12.51.91.20.6
1209 11 0043.22.41.60.80
1209 19 0043.22.41.60.80
1209 21 001.51.20.90.60.30
1209 22 101.210.70.50.20
1209 22 301.210.70.50.20
1209 22 901.210.70.50.20
1209 23 101.210.70.50.20
1209 23 301.51.20.90.60.30
1209 23 901.51.20.90.60.30
1209 24 001.210.70.50.20
1209 25 101.210.70.50.20
1209 25 901.210.70.50.20
1209 26 001.210.70.50.20
1209 29 111.210.70.50.20
1209 29 191.210.70.50.20
1209 29 201.210.70.50.20
1209 29 301.210.70.50.20
1209 29 401.210.70.50.20
1209 29 501.51.20.90.60.30
1209 29 601.51.20.90.60.30
1209 29 701.51.20.90.60.30
1209 29 901.51.20.90.60.30
1209 30 001.81.51.10.70.30
1209 91 101.81.51.10.70.30
1209 91 902.11.71.10.80.40
1209 99 911.81.51.10.70.30
1209 99 992.11.71.10.80.40
1210 10 005.64.53.32.21.10
1210 20 005.64.53.32.21.10
1211 10 000.60.50.30.20.10
1211 90 100.90.70.50.30.10
1211 90 300.90.70.50.30.10
1212 10 102.521.510.50
1212 10 910.60.50.30.20.10
1212 10 992.82.21.61.10.50
1212 30 001.210.70.50.20
1212 99 101.210.70.50.20
1214 90 102.82.21.61.10.50
Chapter 13
1302 12 001.210.70.50.20
1302 13 001.210.70.50.20
1302 14 001.210.70.50.20
1302 19 301.210.70.50.20
1302 19 910.60.50.30.20.10
1302 20 1011.296.74.52.20
1302 20 906.55.23.92.61.30
1302 31 000.60.50.30.20.10
1302 32 100.70.60.40.30.10
Chapter 15
1502 00 913.12.51.81.20.60
1502 00 993.12.51.81.20.60
1503 00 19543210
1503 00 302.521.510.50
1503 00 906.253.72.51.20
1504 10 106664.93.92.91.90.9
1504 20 1017171714.111.38.45.62.8
1504 30 1117171714.111.38.45.62.8
1504 30 1917171714.111.38.45.62.8
1505 10 001.210.70.50.20
1505 90 0010.80.60.40.20
1506 00 000.50.40.30.20.10
1507 10 105554.13.32.41.60.8
1507 10 901010108.36.64.93.31.6
1507 90 108886.65.33.92.61.3
1507 90 9015151512.49.97.44.92.4
1508 10 105554.13.32.41.60.8
1508 10 901010108.36.64.93.31.6
1508 90 108886.65.33.92.61.3
1508 90 9015151512.49.97.44.92.4
1511 10 104443.32.61.91.30.6
1511 10 906664.93.92.91.90.9
1511 90 1120202016.613.39.96.63.3
1511 90 1917171714.111.38.45.62.8
1511 90 918886.65.33.92.61.3
1511 90 9914141411.69.36.94.62.3
1512 11 105554.13.32.41.60.8
1512 11 911010108.36.64.93.31.6
1512 11 991010108.36.64.93.31.6
1512 19 108886.65.33.92.61.3
1512 19 9115151512.49.97.44.92.4
1512 19 9915151512.49.97.44.92.4
1512 21 105554.13.32.41.60.8
1512 21 901010108.36.64.93.31.6
1512 29 108886.65.33.92.61.3
1512 29 9015151512.49.97.44.92.4
1513 11 105554.13.32.41.60.8
1513 11 9120202016.613.39.96.63.3
1513 11 991010108.36.64.93.31.6
1513 19 1120202016.613.39.96.63.3
1513 19 1917171714.111.38.45.62.8
1513 19 308886.65.33.92.61.3
1513 19 9120202016.613.39.96.63.3
1513 19 9915151512.49.97.44.92.4
1513 21 115554.13.32.41.60.8
1513 21 195554.13.32.41.60.8
1513 21 3020202016.613.39.96.63.3
1513 21 911010108.36.64.93.31.6
1513 21 991010108.36.64.93.31.6
1513 29 1120202016.613.39.96.63.3
1513 29 1917171714.111.38.45.62.8
1513 29 308886.65.33.92.61.3
1513 29 5020202016.613.39.96.63.3
1513 29 9115151512.49.97.44.92.4
1513 29 9915151512.49.97.44.92.4
1514 10 105554.13.32.41.60.8
1514 10 901010108.36.64.93.31.6
1514 90 108886.65.33.92.61.3
1514 90 9015151512.49.97.44.92.4
1515 11 005554.13.32.41.60.8
1515 19 108886.65.33.92.61.3
1515 19 9015151512.49.97.44.92.4
1515 21 105554.13.32.41.60.8
1515 21 901010108.36.64.93.31.6
1515 29 108886.65.33.92.61.3
1515 29 9015151512.49.97.44.92.4
1515 30 908886.65.33.92.61.3
1515 40 003332.41.91.40.90.4
1515 50 115554.13.32.41.60.8
1515 50 191010108.36.64.93.31.6
1515 50 918886.65.33.92.61.3
1515 50 9915151512.49.97.44.92.4
1515 60 9010.80.60.40.20
1515 90 103332.41.91.40.90.4
1515 90 291010108.36.64.93.31.6
1515 90 3915151512.49.97.44.92.4
1515 90 405554.13.32.41.60.8
1515 90 5120202016.613.39.96.63.3
1515 90 591010108.36.64.93.31.6
1515 90 608886.65.33.92.61.3
1515 90 9120202016.613.39.96.63.3
1515 90 9915151512.49.97.44.92.4
1516 10 1020202016.613.39.96.63.3
1516 10 9017171714.111.38.45.62.8
1516 20 918886.65.33.92.61.3
1516 20 998886.65.33.92.61.3
1517 10 108.16.54.83.21.60
1517 10 9025252520.816.612.48.34.1
1517 90 108.16.54.83.21.60
1517 90 9115151512.49.97.44.92.4
1517 90 931.10.90.60.40.20
1517 90 9925252520.816.612.48.34.1
1518 00 1032.41.81.20.60
1518 00 3132.51.81.20.60
1518 00 39543210
1518 00 9032.41.81.20.60
1519 11 0021.61.20.80.40
1519 12 001.71.410.70.30
1519 13 001.10.90.60.40.20
1519 19 001.10.90.60.40.20
1519 20 001.10.90.60.40.20
1519 30 001.310.70.50.20
1520 10 000.30.30.20.10
1520 90 001.51.20.90.60.30
1521 10 9010.80.60.40.20
1521 90 100.80.70.50.30.10
1521 90 991.210.70.50.20
1522 00 101.51.20.90.60.30
1522 00 915554.13.32.41.60.8
1522 00 991.210.70.50.20
Chapter 16
1602 20 101086420
1602 41 9010.68.56.34.22.10
1602 42 9010.68.56.34.22.10
1602 49 9010.68.56.34.22.10
1602 50 1012.5107.552.50
1602 50 9016.2139.76.53.20
1602 90 3110.68.56.34.22.10
1602 90 6112.5107.552.50
1602 90 6916.2139.76.53.20
1602 90 7112.5107.552.50
1602 90 7912.5107.552.50
1602 90 9916.2139.76.52.50
1603 00 1012.5107.552.50
1603 00 3012.5107.552.50
1604 11 003.42.721.30.60
1604 12 109.37.55.63.71.80
1604 12 9012.5107.552.50
1604 13 1018.115.913.611.396.84.52.2
1604 13 9012.5107.552.50
1604 14 1015129630
1604 14 9015.612.59.36.23.10
1604 15 1015.612.59.36.23.10
1604 15 9012.5107.552.50
1604 16 0015.612.59.36.23.10
1604 19 104.33.52.61.70.80
1604 19 3015129630
1604 19 5015.612.59.36.23.10
1604 19 919.37.55.63.71.80
1604 19 9912.5107.552.50
1604 20 103.42.721.30.60
1604 20 304.33.52.61.70.80
1604 20 4015.612.59.36.23.10
1604 20 5015.612.59.36.23.10
1604 20 7015129630
1604 20 9012.5107.552.50
1604 30 1018.71511.27.53.70
1604 30 9018.71511.27.53.70
1605 10 001086420
1605 20 00Simply boiled and shelled6.253.72.51.20
Other12.5107.552.50
1605 30 00Simply boiled and shelled6.253.72.51.20
Other12.5107.552.50
1605 40 00Simply boiled and shelled6.253.72.51.20
Other12.5107.552.50
1605 90 106.253.72.51.20
1605 90 9016.2139.76.53.20
Chapter 17
1702 50 00543210
1702 90 10543210
1704 10 11543210
1704 10 19543210
1704 10 91543210
1704 10 99543210
1704 90 105.24.23.12.110
1704 90 308.16.54.93.21.60
1704 90 518.16.54.93.21.60
1704 90 558.16.54.93.21.60
1704 90 618.16.54.93.21.60
1704 90 658.16.54.93.21.60
1704 90 718.16.54.93.21.60
1704 90 758.16.54.93.21.60
1704 90 818.16.54.93.21.60
1704 90 998.16.54.93.21.60
Chapter 18
1801 00 001.81.51.10.70.30
1802 00 001.81.51.10.70.30
1803 10 003.732.21.50.70
1803 20 003.732.21.50.70
1804 00 0032.41.81.20.60
1805 00 0043.22.41.60.80
1806 10 106.253.72.51.20
1806 10 306.253.72.51.20
1806 10 906.253.72.51.20
1806 20 107.564.531.50
1806 20 307.564.531.50
1806 20 507.564.531.50
1806 20 7011.89.57.14.72.30
1806 20 907.564.531.50
1806 31 107.564.531.50
1806 31 907.564.531.50
1806 32 107.564.531.50
1806 32 907.564.531.50
1806 90 117.564.531.50
1806 90 197.564.531.50
1806 90 317.564.531.50
1806 90 397.564.531.50
1806 90 507.564.531.50
1806 90 607.564.531.50
1806 90 707.564.531.50
1806 90 907.564.531.50
Chapter 19
1901 10 006.85.54.12.71.30
1901 20 006.85.54.12.71.30
1901 90 11543210
1901 90 19543210
1901 90 906.85.54.12.71.30
1902 11 007.564.531.50
1902 19 107.564.531.50
1902 19 907.564.531.50
1902 20 103.42.721.30.60
1902 20 918.16.54.83.21.60
1902 20 998.16.54.83.21.60
1902 30 106.253.72.51.20
1902 30 906.253.72.51.20
1902 40 107.564.531.50
1902 40 906.253.72.51.20
1903 00 006.253.72.51.20
1904 10 103.732.21.50.70
1904 10 30543210
1904 10 90543210
1904 90 107.564.531.50
1904 90 907.564.531.50
1905 10 005.64.53.32.21.10
1905 20 108.16.54.83.21.60
1905 20 308.16.54.83.21.60
1905 20 908.16.54.83.21.60
1905 30 118.16.54.83.21.60
1905 30 198.16.54.83.21.60
1905 30 308.16.54.83.21.60
1905 30 518.16.54.83.21.60
1905 30 598.16.54.83.21.60
1905 30 918.16.54.83.21.60
1905 30 998.16.54.83.21.60
1905 40 008.16.54.83.21.60
1905 90 103.732.21.50.70
1905 90 204.33.52.61.70.80
1905 90 308.775.23.51.70
1905 90 408.16.54.83.21.60
1905 90 508.16.54.83.21.60
1905 90 608.16.54.83.21.60
1905 90 908.16.54.83.21.60
Chapter 20
2001 10 00Cucumbers6.85.54.12.71.30
Gherkins13.7118.25.52.70
2001 20 006.253.72.51.20
2001 90 203.12.51.81.20.60
2001 90 30543210
2001 90 408.16.54.83.21.60
2001 90 506.253.72.51.20
2001 90 90Sweet peppers6.253.72.51.20
Cauliflowers6.253.72.51.20
Other6.253.72.51.20
2002 10 0011.296.74.52.20
2002 90 1011.296.74.52.20
2002 90 3011.296.74.52.20
2002 90 9011.296.74.52.20
2003 10 10Of additional note to chapter 714.311.58.65.72.80
Other7.15.74.32.81.40
2003 10 907.15.74.32.81.40
2003 20 0011.296.74.52.20
2004 10 1011.296.74.52.20
2004 10 916.85.54.12.71.30
2004 10 996.85.54.12.71.30
2004 90 10543210
2004 90 30Capers6.253.72.51.20
Olives6.253.72.51.20
Saverkraut12.5107.552.50
2004 90 5015129630
2004 90 9111.296.74.52.20
2004 90 95Artichoke Hearts and bottoms13.7118.25.52.70
Other6.85.54.12.71.30
2004 90 99Mixtures of vegetables13.7118.25.52.70
Carrots13.7118.25.52.70
Sweet peppers6.85.54.12.71.30
Other6.85.54.12.71.30
2005 10 006.85.54.12.71.30
2005 20 106.85.54.12.71.30
2005 20 906.85.54.12.71.30
2005 30 0012.5107.552.50
2005 40 0015129630
2005 51 006.85.54.12.71.30
2005 59 0015129630
2005 60 0013.7118.25.52.70
2005 70 006.253.72.51.20
2005 80 00543210
2005 90 103.12.51.81.20.60
2005 90 306.253.72.51.20
2005 90 50Artichoke Hearts and bottoms13.7118.25.52.70
Other6.85.54.12.71.30
2005 90 90Mixtures of vegetables13.7118.25.52.70
Carrots13.7118.25.52.70
Sweet peppers6.85.54.12.71.30
Other6.85.54.12.71.30
2006 00 3115.612.59.36.23.10
2006 00 3915.612.59.36.23.10
2006 00 9015.612.59.36.23.10
2007 10 1018.71511.27.53.70
2007 10 9018.71511.27.53.70
2007 91 1015.612.59.36.23.10
2007 91 3015.612.59.36.23.10
2007 91 9016.813.510.16.73.30
2007 99 1017.51410.573.50
2007 99 2018.71511.27.53.70
2007 99 3118.71511.27.53.70
2007 99 3318.71511.27.53.70
2007 99 3518.71511.27.53.70
2007 99 3918.71511.27.53.70
2007 99 5118.71511.27.53.70
2007 99 5918.71511.27.53.70
2007 99 9018.71511.27.53.70
2008 11 10543210
2008 11 918.775.23.51.70
2008 11 997.564.531.50
2008 19 108.775.23.51.70
2008 19 901086420
2008 20 11201612840
2008 20 19201612840
2008 21 31201612840
2008 20 39201612840
2008 20 5113.7118.25.52.70
2008 20 5913.7118.25.52.70
2008 20 7115129630
2008 20 7915129630
2008 20 9114.311.58.65.72.80
2008 20 9914.311.58.65.72.80
2008 30 1118.71511.27.53.70
2008 30 19201612840
2008 30 3118.71511.27.53.70
2008 30 39201612840
2008 30 5110.68.56.34.22.10
2008 30 55Mandarin (including tangerine and satsuma segments), in cans1086420
Other13.110.57.85.22.60
2008 30 5912.5107.552.50
2008 30 7110.68.56.34.22.10
2008 30 75Mandarin (including tangerine and satsuma segments), in cans1086420
Other12.5107.552.50
2008 30 7915129630
2008 30 9114.311.58.65.72.80
2008 30 9914.311.58.65.72.80
2008 40 1118.71511.27.53.70
2008 40 19201612840
2008 40 2118.71511.27.53.70
2008 40 29201612840
2008 40 3118.71511.27.53.70
2008 40 3918.71511.27.53.70
2008 40 5112.5107.552.50
2008 40 5912.5107.552.50
2008 40 7113.7118.25.52.70
2008 40 7913.7118.25.52.70
2008 04 9113.110.57.85.22.60
2008 40 9913.110.57.85.22.60
2008 50 1118.71511.27.53.70
2008 50 19201612840
2008 50 3118.71511.27.53.70
2008 50 39201612840
2008 50 51201612840
2008 50 59201612840
2008 50 6113.7118.25.52.70
2008 50 6913.7118.25.52.70
2008 50 7115129630
2008 50 7915129630
2008 50 9110.68.56.34.22.10
2008 50 9914.311.58.65.72.80
2008 60 1118.71511.27.53.70
2008 60 19201612840
2008 60 3118.71511.27.53.70
2008 60 39201612840
2008 60 5112.5107.552.50
2008 60 5912.5107.552.50
2008 60 6115129630
2008 60 6915129630
2008 60 7114.311.58.65.72.80
2008 60 7914.311.58.65.72.80
2008 60 9114.311.58.65.72.80
2008 60 9914.311.58.65.72.80
2008 70 1118.71511.27.53.70
2008 70 19201612840
2008 70 3118.71511.27.53.70
2008 70 39201612840
2008 70 51201612840
2008 70 59201612840
2008 70 6113.7118.25.52.70
2008 70 6913.7118.25.52.70
2008 70 7113.7118.25.52.70
2008 70 7913.7118.25.52.70
2008 70 9111.89.57.14.72.30
2008 70 9914.311.58.65.72.80
2008 80 1118.71511.27.53.70
2008 80 19201612840
2008 80 3118.71511.27.53.70
2008 80 39201612840
2008 80 5012.5107.552.50
2008 80 7015129630
2008 80 9114.311.58.65.72.80
2008 80 9914.311.58.65.72.80
2008 91 00543210
2008 92 1118.71511.27.53.70
2008 92 19201612840
2008 92 3118.71511.27.53.70
2008 92 39201612840
2008 92 5012.5107.552.50
2008 92 719.37.55.63.71.80
2008 92 7913.7118.25.52.70
2008 92 9114.311.58.65.72.80
2008 92 9914.311.58.65.72.80
2008 99 1112.5107.552.50
2008 99 19201612840
2008 99 21201612840
2008 99 29201612840
2008 99 3118.71511.27.53.70
2008 99 33201612840
2008 99 3518.71511.27.53.70
2008 99 39201612840
2008 99 4313.7118.25.52.70
2008 99 4512.5107.552.50
2008 99 4912.5107.552.50
2008 99 5315129630
2008 99 5515129630
2008 99 5915129630
2008 99 7111.89.57.14.72.30
2008 99 7914.311.58.65.72.80
2008 99 85543210
2008 99 918.16.54.83.21.60
2008 99 99543210
2009 11 1126.22115.710.55.20
2009 11 1926.22115.710.55.20
2009 11 9111.89.57.14.72.30
2009 11 9911.89.57.14.72.30
2009 19 1126.22115.710.55.20
2009 19 1926.22115.710.55.20
2009 19 9111.89.57.14.72.30
2009 19 9911.89.57.14.72.30
2009 20 1126.22115.710.55.20
2009 20 1926.22115.710.55.20
2009 20 919.37.55.63.71.80
2009 20 997.564.531.50
2009 30 1126.22115.710.55.20
2009 30 1926.22115.710.55.20
2009 30 3111.296.74.52.20
2009 30 3911.89.57.14.72.30
2009 30 5111.296.74.52.20
2009 30 5511.296.74.52.20
2009 30 5911.89.57.14.72.30
2009 30 9111.296.74.52.20
2009 30 9511.296.74.52.20
2009 30 9911.89.57.14.72.30
2009 40 1126.22115.710.55.20
2009 40 1926.22115.710.55.20
2009 40 3011.89.57.14.72.30
2009 40 9111.89.57.14.72.30
2009 40 9311.89.57.14.72.30
2009 40 9912.5107.552.50
2009 50 1012.5107.552.50
2009 50 9013.110.57.85.22.60
2009 60 1131.22518.712.56.20
2009 60 1931.22518.712.56.20
2009 60 5117.51410.573.50
2009 60 5917.51410.573.50
2009 60 7117.51410.573.50
2009 60 7917.51410.573.50
2009 60 9017.51410.573.50
2009 70 1118.71511.27.53.70
2009 70 1918.71511.27.53.70
2009 70 3011.296.74.52.20
2009 70 9111.296.74.52.20
2009 70 9311.296.74.52.20
2009 70 9911.296.74.52.20
2009 80 1126.22115.710.55.20
2009 80 1926.22115.710.55.20
2009 80 3126.22115.710.55.20
2009 80 3926.22115.710.55.20
2009 80 5015129630
2009 80 6115129630
2009 80 6315129630
2009 80 6915.612.59.36.23.10
2009 80 8013.110.57.85.22.60
2009 80 9113.110.57.85.22.60
2009 80 9313.110.57.85.22.60
2009 80 958.775.23.51.70
2009 80 9913.7118.25.52.70
2009 90 1126.22115.710.55.20
2009 90 1926.22115.710.55.20
2009 90 2126.22115.710.55.20
2009 90 2926.22115.710.55.20
2009 90 3115.612.59.36.23.10
2009 90 3915.612.59.36.23.10
2009 90 4111.89.57.14.72.30
2009 90 4912.5107.552.50
2009 90 5113.110.57.85.22.60
2009 90 5913.7118.25.52.70
2009 90 7111.89.57.14.72.30
2009 90 7311.89.57.14.72.30
2009 90 7912.5107.552.50
2009 90 9113.110.57.85.22.60
2009 90 9313.110.57.85.22.60
2009 90 9913.7118.25.52.70
Chapter 21
2101 10 114.53.62.71.80.90
2101 10 194.53.62.71.80.90
2101 10 914.53.62.71.80.90
2101 10 998.16.54.83.21.60
2101 20 1032.41.81.20.60
2101 20 908.16.54.83.21.60
2101 30 114.53.62.71.80.90
2101 30 19543210
2101 30 915.54.43.32.21.10
2101 30 998.775.23.51.70
2102 10 104.23.42.51.70.80
2102 10 319.37.55.63.71.80
2102 10 399.37.55.63.71.80
2102 10 905.74.63.42.31.10
2102 20 113.22.61.91.30.60
2102 20 1921.61.20.80.40
2102 30 002.31.91.40.90.40
2103 10 0032.41.81.20.60
2103 20 0043.22.41.60.80
2103 30 1010.80.60.40.20
2103 30 903.52.82.11.40.70
2103 90 9032.41.81.20.60
2104 10 004.53.62.71.80.90
2104 20 005.54.43.32.21.10
2105 00 107.564.531.50
2105 00 917.564.531.50
2105 00 997.564.531.50
2106 10 10543210
2106 10 908.16.54.83.21.60
2106 90 108.16.54.83.21.60
2106 90 91543210
2106 90 998.16.54.83.21.60
Chapter 22
2201 10 0010.80.60.40.20
2202 10 003.732.21.50.70
2202 90 103.732.21.50.70
2202 90 91543210
2202 90 95543210
2202 90 99543210
2203 00 1064.83.62.41.20
2203 00 9064.83.62.41.20
2204 10 1125 ECU/HL20 ECU/HL15 ECU/HL10 ECU/HL5 ECU/HL0
2204 10 1925 ECU/HL20 ECU/HL15 ECU/HL10 ECU/HL5 ECU/HL0
2204 10 9025 ECU/HL20 ECU/HL15 ECU/HL10 ECU/HL5 ECU/HL0
2204 21 1025 ECU/HL20 ECU/HL15 ECU/HL10 ECU/HL5 ECU/HL0
2204 21 219 ECU/HL7.2 ECU/HL5.4 ECU/HL3.6 ECU/HL1.8 ECU/HL0
2204 21 239 ECU/HL7.2 ECU/HL5.4 ECU/HL3.6 ECU/HL1.8 ECU/HL0
2204 21 259 ECU/HL7.2 ECU/HL5.4 ECU/HL3.6 ECU/HL1.8 ECU/HL0
2204 21 299 ECU/HL7.2 ECU/HL5.4 ECU/HL3.6 ECU/HL1.8 ECU/HL0
2204 21 3110.5 ECU/HL8.4 ECU/HL6.3 ECU/HL4.2 ECU/HL2.1 ECU/HL0
2204 21 3310.5 ECU/HL8.4 ECU/HL6.3 ECU/HL4.2 ECU/HL2.1 ECU/HL0
2204 21 3510.5 ECU/HL8.4 ECU/HL6.3 ECU/HL4.2 ECU/HL2.1 ECU/HL0
2204 21 3910.5 ECU/HL8.4 ECU/HL6.3 ECU/HL4.2 ECU/HL2.1 ECU/HL0
2204 21 4110.1 ECU/HL8.1 ECU/HL6.1 ECU/HL4 ECU/HL2 ECU/HL0
2204 21 4912.8 ECU/HL10.3 ECU/HL7.7 ECU/HL5.1 ECU/HL2.5 ECU/HL0
2204 21 5110.9 ECU/HL8.7 ECU/HL6.5 ECU/HL4.3 ECU/HL2.1 ECU/HL0
2204 21 5914.3 ECU/HL11.5 ECU/HL8.6 ECU/HL5.7 ECU/HL2.8 ECU/HL0
2204 21 901.2 ECU per % Volume per HL +7.5 ECU/HL0.9 ECU per % Volume per HL +6 ECU/HL0.7 ECU per % Volume per HL +4.5 ECU/HL0.4 ECU per % Volume per HL +3 ECU/HL0.2 ECU per % Volume per HL +1.5 ECU/HL0
2204 29 1025 ECU/HL20 ECU/HL15 ECU/HL10 ECU/HL5 ECU/HL0
2204 29 216.8 ECU/HL5.4 ECU/HL4 ECU/HL2.7 ECU/HL1.3 ECU/HL0
2204 29 236.8 ECU/HL5.4 ECU/HL4 ECU/HL2.7 ECU/HL1.3 ECU/HL0
2204 29 256.8 ECU/HL5.4 ECU/HL4 ECU/HL2.7 ECU/HL1.3 ECU/HL0
2204 29 296.8 ECU/HL5.4 ECU/HL4 ECU/HL2.7 ECU/HL1.3 ECU/HL0
2204 29 318.3 ECU/HL6.6 ECU/HL4.9 ECU/HL3.3 ECU/HL1.6 ECU/HL0
2204 29 338.3 ECU/HL6.6 ECU/HL4.9 ECU/HL3.3 ECU/HL1.6 ECU/HL0
2204 29 358.3 ECU/HL6.6 ECU/HL4.9 ECU/HL3.3 ECU/HL1.6 ECU/HL0
2204 29 398.3 ECU/HL6.6 ECU/HL4.9 ECU/HL3.3 ECU/HL1.6 ECU/HL0
2204 29 418.3 ECU/HL6.6 ECU/HL4.9 ECU/HL3.3 ECU/HL1.6 ECU/HL0
2204 29 459 ECU/HL7.2 ECU/HL5.4 ECU/HL3.6 ECU/HL1.8 ECU/HL0
2204 29 4910.5 ECU/HL8.4 ECU/HL6.3 ECU/HL4.2 ECU/HL2.1 ECU/HL0
2204 29 519 ECU/HL7.2 ECU/HL5.4 ECU/HL3.6 ECU/HL1.8 ECU/HL0
2204 29 559.8 ECU/HL7.8 ECU/HL5.8 ECU/HL3.9 ECU/HL1.9 ECU/HL0
2204 29 5914.3 ECU/HL11.5 ECU/HL8.6 ECU/HL5.7 ECU/HL2.8 ECU/HL0
2204 29 901.2 ECU per % Volume per HL0.9 ECU per % Volume per HL0.7 ECU per % Volume per HL0.4 ECU per % Volume per HL0.2 ECU per % Volume per HL0
2204 30 102520151050
2204 30 9117.51410.573.50
2204 30 9931.22518.712.56.20
2205 10 104.2 ECU/HL3.4 ECU/HL2.5 ECU/HL1.7 ECU/HL0.8 ECU/HL0
2205 10 900.3 ECU per % Volume per HL +2.5 ECU/HL0.2 ECU per % Volume per HL +2 ECU/HL0.1 ECU per % Volume per HL +1.5 ECU/HL0.1 ECU per % Volume per HL +1 ECU/HL0
2205 90 103.5 ECU/HL2.8 ECU/HL2.1 ECU/HL1.4 ECU/HL0.7 ECU/HL0
2205 90 900.3 ECU per % Volume per HL0.2 ECU per % Volume per HL0.1 ECU per % Volume per HL0.1 ECU per % Volume per HL0
2206 00 101 ECU per % Volume per HL subject to a minimum of 5.6 ECU per HL0.8 ECU per % Volume per HL subject to a minimum of 4.5 ECU per HL0.6 ECU per % Volume per HL subject to a minimum of 3.3 ECU per HL0.4 ECU per % Volume per HL subject to a minimum of 2.2 ECU per HL0.2 ECU per % Volume per HL subject to a minimum of 1.1 ECU per HL0
2206 00 9118.7 ECU/HL15 ECU/HL11.2 ECU/HL7.5 ECU/HL3.7 ECU/HL0
2206 00 937.5 ECU/HL6 ECU/HL4.5 ECU/HL3 ECU/HL1.5 ECU/HL0
2206 00 995.6 ECU/HL4.5 ECU/HL3.3 ECU/HL2.2 ECU/HL1.1 ECU/HL0
2207 10 00Obtained from Annex II products18.7 ECU/HL15 ECU/HL11.2 ECU/HL7.5 ECU/HL3.7 ECU/HL0
Other7.5 ECU/HL6 ECU/HL4.5 ECU/HL3 ECU/HL1.5 ECU/HL0
2207 20 00Obtained from Annex II products10 ECU/HL8 ECU/HL6 ECU/HL4 ECU/HL2 ECU/HL0
Other4 ECU/HL3.2 ECU/HL2.4 ECU/HL1.8 ECU/HL0.8 ECU/HL0
2208 10 906.7 min 0.3 ECU/% Vol/HL5.4 min 0.3 ECU/% Vol/HL4 min 0.2 ECU/% Vol/HL2.7 min 0.1 ECU/% Vol/HL1.30
2208 20 100.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 20 900.3 ECU/% Vol/HL0.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 30 110.3 ECU/HL0.3 ECU/HL0.2 ECU/HL0.1 ECU/HL0
2208 30 910.7 ECU/HL0.6 ECU/HL0.4 ECU/HL0.3 ECU/HL0.1 ECU/HL0
2208 40 100.2 ECU/% Vol/HL +1.2 ECU/HL0.2 ECU/% Vol/HL +1 ECU/HL0.1 ECU/% Vol/HL +0.7 ECU/HL0.1 ECU/% Vol/HL +0.5 ECU/HL0.2 ECU/HL0
2208 40 900.2 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 50 110.2 ECU/% Vol/HL +1.2 ECU/HL0.2 ECU/% Vol/HL +1 ECU/HL0.1 ECU/% Vol/HL +0.7 ECU/HL0.1 ECU/% Vol/HL +0.5 ECU/HL0.2 ECU/HL0
2208 50 190.2 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 50 910.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 50 990.3 ECU/% Vol/HL0.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 90 110.2 ECU/% Vol/HL +1.2 ECU/HL0.2 ECU/% Vol/HL +1 ECU/HL0.1 ECU/% Vol/HL +0.7 ECU/HL0.1 ECU/% Vol/HL +0.5 ECU/HL0.2 ECU/HL0
2208 90 190.2 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 90 310.3 ECU/% Vol/HL +1.2 ECU/HL0.2 ECU/% Vol/HL +1 ECU/HL0.1 ECU/% Vol/HL +0.7 ECU/HL0.1 ECU/% Vol/HL +0.5 ECU/HL0.2 ECU/HL0
2208 90 330.3 ECU/% Vol/HL +1.2 ECU/HL0.2 ECU/% Vol/HL +1 ECU/HL0.1 ECU/% Vol/HL +0.7 ECU/HL0.1 ECU/% Vol/HL +0.5 ECU/HL0.2 ECU/HL0
2208 90 390.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 90 510.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 90 530.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 90 550.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 90 590.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 90 710.3 ECU/% Vol/HL0.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 90 730.3 ECU/% Vol/HL0.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 90 790.3 ECU/% Vol/HL0.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2208 90 91Obtained from Annex II products1 ECU/% Vol/HL +6.2 ECU/HL0.8 ECU/% Vol/HL +5 ECU/HL0.6 ECU/% Vol/HL +3.7 ECU/HL0.4 ECU/% Vol/HL +2.5 ECU/HL0.2 ECU/% Vol/HL +1.2 ECU/HL0
Other0.3 ECU/% Vol/HL +2.5 ECU/HL0.3 ECU/% Vol/HL +2 ECU/HL0.2 ECU/% Vol/HL +1.5 ECU/HL0.1 ECU/% Vol/HL +1 ECU/HL0.5 ECU/HL0
2208 90 99Obtained from Annex II products1 ECU/% Vol/HL0.8 ECU/% Vol/HL0.6 ECU/% Vol/HL0.4 ECU/% Vol/HL0.2 ECU/% Vol/HL0
Other0.3 ECU/% Vol/HL0.3 ECU/% Vol/HL0.2 ECU/% Vol/HL0.1 ECU/% Vol/HL0
2209 00 115 ECU/HL4 ECU/HL3 ECU/HL2 ECU/HL1 ECU/HL0
2209 00 193.7 ECU/HL3 ECU/HL2.2 ECU/HL1.5 ECU/HL0.7 ECU/HL0
2209 00 915 ECU/HL4 ECU/HL3 ECU/HL2 ECU/HL1 ECU/HL0
2209 00 993.7 ECU/HL3 ECU/HL2.2 ECU/HL1.5 ECU/HL0.7 ECU/HL0
Chapter 23
2302 50 002.521.510.50
2307 00 191.2 ECU per kg of total alcohol1 ECU per kg of total alcohol0.7 ECU per kg of total alcohol0.5 ECU per kg of total alcohol0.2 ECU per kg of total alcohol0
2308 90 191.2 ECU per kg of total alcohol1 ECU per kg of total alcohol0.7 ECU per kg of total alcohol0.5 ECU per kg of total alcohol0.2 ECU per kg of total alcohol0
2308 90 901.210.70.50.20
2309 10 909.37.55.63.71.80
2309 90 103.732.21.50.70
2309 90 991.210.70.50.20
Chapter 24
2401 10 1014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 10 2014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 10 3014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 10 4114.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 10 4914.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 10 508.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 10 608.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 10 708.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 10 808.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 10 908.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 17.5 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 20 1014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 20 2014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 20 3014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 20 4014.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 20 4914.3% subject to a minimum of 17.5 ECU and a maximum of 18.7 ECU per 100 kg11.5% subject to a minimum of 14 ECU and a maximum of 15 ECU per 100 kg8.6% subject to a minimum of 10.5 ECU and a maximum of 11.2 ECU per 100 kg5.7% subject to a minimum of 7 ECU and a maximum of 7.5 ECU per 100 kg2.8% subject to a minimum of 3.5 ECU and a maximum of 3.7 ECU per 100 kg0
2401 20 508.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 20 608.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 20 708.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 20 808.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 20 908.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2401 30 008.7% subject to a minimum of 17.5 ECU and a maximum of 43.7 ECU per 100 kg7% subject to a minimum of 14 ECU and a maximum of 35 ECU per 100 kg5.2% subject to a minimum of 10.5 ECU and a maximum of 26.2 ECU per 100 kg3.5% subject to a minimum of 7 ECU and a maximum of 17.5 ECU per 100 kg1.7% subject to a minimum of 3.5 ECU and a maximum of 8.7 ECU per 100 kg0
2402 10 0010.78.66.44.32.10
2402 20 0022.51813.594.50
2402 90 0022.51813.594.50
2403 10 0029.223.417.511.75.80
2403 91 006.55.23.92.61.30
2403 99 1016.2139.76.53.20
2403 99 906.55.23.92.61.30
Chapter 25
2501 00 310.2 ECU per 1000 kg0.1 ECU per 1000 kg0.1 ECU per 1000 kg0
2501 00 510.9 ECU per 1000 kg0.7 ECU per 1000 kg0.5 ECU per 1000 kg0.3 ECU per 1000 kg0.1 ECU per 1000 kg0
2501 00 911.9 ECU per 1000 kg1.4 ECU per 1000 kg1 ECU per 1000 kg0.6 ECU per 1000 kg0.3 ECU per 1000 kg0
2501 00 991.9 ECU per 1000 kg1.4 ECU per 1000 kg1 ECU per 1000 kg0.6 ECU per 1000 kg0.3 ECU per 1000 kg0
Chapter 27
2710 00 213.72.82.10
2710 00 253.72.82.10
2710 00 313.72.82.10
2710 00 333.72.82.10
2710 00 353.72.82.10
2710 00 373.72.82.10
2710 00 393.72.82.10
2710 00 513.72.82.10
2710 00 553.72.82.10
2710 00 593.72.82.10
2710 00 692.10
2710 00 792.10
2710 00 952.50
2710 00 993.72.82.10
2711 12 11432.20
2712 10 9032.20
2712 20 002.70
2712 90 902.70
Chapter 28
2801 10 002.70
2805 30 1032.20
2805 40 101.6 ECU per bottle or flask1.2 ECU per bottle or flask0.9 ECU per bottle or flask0.5 ECU per bottle or flask0.2 ECU per bottle or flask0
2809 10 002.70
2811 23 0032.20
2814 10 002.70
2814 20 002.70
2815 11 0032.20
2815 12 0032.20
2815 20 102.70
2815 20 902.70
2816 30 002.10
2817 00 002.70
2819 10 003.32.50
2819 90 003.32.50
2824 10 002.60
2824 20 002.60
2824 90 002.60
2825 80 002.70
2825 90 902.70
2826 11 002.50
2826 20 0032.20
2827 34 002.50
2827 35 002.50
2831 10 0032.20
2831 90 0032.20
2833 21 002.20
2833 22 002.20
2833 23 002.20
2833 26 002.20
2833 27 002.20
2833 30 902.50
2835 22 002.50
2835 23 002.50
2835 24 002.50
2835 25 002.50
2835 26 002.50
2835 29 002.50
2835 31 002.50
2835 39 902.50
2836 20 002.50
2836 30 002.50
2837 20 0032.20
2841 20 003.22.40
2841 30 0032.20
2841 40 0032.20
2841 50 0032.20
2845 10 002.50
2845 90 102.50
2849 10 003.52.60
2850 00 702.10
Chapter 29
2901 10 1032.20
2903 11 0032.20
2903 12 0032.20
2903 13 0032.20
2903 14 0032.20
2903 15 0032.20
2903 16 0032.20
2903 19 0032.20
2903 21 0032.20
2903 22 0032.20
2903 23 0032.20
2903 29 0032.20
2903 30 392.10
2904 90 902.70
2905 11 003.22.40
2905 19 102.50
2905 31 003.22.40
2905 32 003.22.40
2905 39 103.22.40
2905 39 903.22.40
2905 41 003.22.40
2905 42 003.22.40
2905 43 007.55.74.22.70
2905 44 117.55.74.22.70
2905 44 195.64.23.10
2905 44 917.55.74.22.70
2905 44 995.64.23.10
2905 49 103.22.40
2906 11 002.10
2907 15 003.52.60
2909 30 1032.20
2909 50 102.70
2910 30 0032.20
2912 12 004.73.62.60
2914 70 102.70
2915 13 003.12.30
2915 21 004.13.12.30
2915 22 003.72.82.10
2915 23 002.70
2915 31 002.82.10
2915 32 002.82.10
2915 39 102.82.10
2915 39 502.50
2916 11 902.50
2916 12 002.50
2916 19 902.70
2917 12 103.22.40
2917 12 903.22.40
2917 19 103.22.40
2917 31 003.22.40
2917 32 003.22.40
2917 33 003.22.40
2917 34 103.22.40
2917 34 903.22.40
2917 35 003.22.40
2917 36 002.50
2917 37 002.50
2917 39 902.50
2918 14 003.22.40
2918 16 002.10
2918 22 0032.20
2918 23 104.33.32.40
2921 11 1032.20
2921 11 9032.20
2921 41 0032.20
2921 42 1032.20
2921 51 902.50
2921 59 002.50
2922 21 002.50
2922 29 002.50
2922 42 003.72.82.10
2924 29 1032.20
2926 10 003.22.40
2926 20 003.22.40
2926 90 103.22.40
2926 90 903.22.40
2929 10 003.22.40
2929 90 003.22.40
2932 29 103.52.60
2933 11 102.50
2933 11 904.23.22.30
2933 51 104.33.32.40
2933 51 303.72.82.10
2933 90 103.52.60
2934 20 103.52.60
2934 20 303.52.60
2939 21 902.30
2939 29 002.30
2939 30 002.50
2939 50 103.32.50
2940 00 103.72.82.10
2940 00 9053.82.80
2941 40 002.50
2942 00 002.50
Chapter 30
3004 90 112.30
3004 90 912.10
Chapter 31
3102 10 102.70
3105 10 002.10
Chapter 32
3204 11 002.50
3204 12 002.50
3204 13 002.50
3204 14 002.50
3204 15 002.50
3204 16 002.50
3204 17 002.50
3204 19 002.50
3204 90 002.50
3205 00 002.50
3208 10 102.50
3208 10 902.50
3208 20 102.50
3208 20 902.50
3208 90 102.50
3208 90 912.50
3209 90 992.50
3209 10 002.50
3209 90 002.50
3210 00 102.50
3210 00 902.50
3212 90 312.50
3212 90 392.50
Chapter 33
3301 11 102.70
3301 12 102.70
3301 13 102.70
3301 14 102.70
3301 19 102.70
Chapter 35
3501 10 503.12.30
3501 10 908.76.64.93.10
3501 90 103.22.40
3501 90 906.24.73.52.20
3502 90 702.50
3502 90 9032.20
3503 00 1032.20
3503 00 5032.20
3505 10 108.76.64.93.10
3505 10 5032.20
3505 10 908.76.64.93.10
3505 20 108.16.14.52.90
3505 20 308.16.14.52.90
3505 20 508.16.14.52.90
3505 20 908.16.14.52.90
Chapter 36
3603 00 902.10
3605 00 002.50
Chapter 37
3706 90 510.2 ECU/100 m0.1 ECU/100 m0.1 ECU/100 m0
3706 90 990.3 ECU/100 m0.2 ECU/100 m0.2 ECU/100 m0.2 ECU/100 m0.1 ECU/100 m0
Chapter 38
3809 10 108.16.14.52.90
3809 10 308.16.14.52.90
3809 10 508.16.14.52.90
3809 10 908.16.14.52.90
3823 60 117.55.74.22.70
3823 60 195.64.23.10
3823 60 917.55.74.22.70
3823 60 995.64.23.10
Chapter 39
3901 10 103.12.30
3901 10 903.12.30
3901 20 003.12.30
3901 30 003.12.30
3901 90 003.12.30
3902 10 003.12.30
3902 20 003.12.30
3902 30 003.12.30
3902 90 003.12.30
3903 11 003.12.30
3903 19 003.12.30
3903 20 003.12.30
3903 30 003.12.30
3903 90 003.12.30
3904 10 003.12.30
3904 21 003.12.30
3904 22 003.12.30
3904 30 003.12.30
3904 40 003.12.30
3904 50 003.12.30
3904 61 003.12.30
3904 69 003.12.30
3904 90 003.12.30
3905 11 0032.20
3905 19 0032.20
3905 20 003.12.30
3905 90 003.12.30
3906 10 003.12.30
3906 90 003.12.30
3911 10 0032.20
3911 90 903.12.30
3912 20 11432.20
3913 90 9032.20
3915 10 003.12.30
3915 20 003.12.30
3915 30 003.12.30
3915 90 113.12.30
3915 90 133.12.30
3915 90 1932.20
3916 10 003.12.30
3916 20 003.12.30
3916 90 513.12.30
3916 90 5932.20
3917 21 103.12.30
3917 22 103.12.30
3917 23 103.12.30
3917 29 1532.20
3917 32 313.12.30
3917 32 353.12.30
3917 32 3932.20
3917 39 1532.20
3919 10 313.22.40
3919 10 513.12.30
3919 10 5932.20
3919 90 313.22.40
3919 90 5032.20
3920 10 113.12.30
3920 10 193.12.30
3920 10 903.12.30
3920 20 103.12.30
3920 20 503.12.30
3920 20 713.12.30
3920 20 793.12.30
3920 20 903.12.30
3920 30 003.12.30
3920 41 103.12.30
3920 41 903.12.30
3920 42 103.12.30
3920 42 903.12.30
3920 51 003.12.30
3920 59 003.12.30
3920 61 003.22.40
3920 62 003.22.40
3920 63 003.22.40
3920 69 003.22.40
3920 71 113.22.40
3920 71 193.22.40
3920 73 503.22.40
3920 91 003.12.30
3920 99 5032.20
3921 11 003.12.30
3921 12 003.12.30
3921 90 113.22.40
3921 90 193.22.40
3921 90 6032.20
3924 90 112.10
3924 90 192.10
Chapter 40
4010 10 002.50
4010 91 002.50
4010 99 002.50
Chapter 42
4202 12 1132.20
4202 12 1932.20
4202 22 1032.20
4202 32 1032.20
4202 92 1132.20
4202 92 1532.20
4202 92 1932.20
4203 21 002.50
4203 29 102.50
4203 29 912.50
4203 29 992.50
Chapter 44
4410 10 102.50
4410 10 302.50
4410 10 502.50
4410 10 902.50
4410 90 102.50
4410 90 902.50
4411 11 002.50
4411 19 002.50
4411 21 002.50
4411 29 002.50
4411 31 002.50
4411 39 002.50
4411 91 002.50
4411 99 002.50
4412 11 002.50
4412 12 002.50
4412 19 002.50
4412 21 002.50
4412 29 102.50
4412 29 902.50
4412 91 002.50
4412 99 102.50
4412 99 902.50
4420 90 102.50
Chapter 45
4502 00 003.32.50
4503 10 0053.82.80
4503 90 0053.82.80
4504 10 0053.82.80
4504 90 9053.82.80
Chapter 48
4801 00 902.20
4802 20 102.20
4802 20 902.20
4802 30 002.20
4802 40 102.20
4802 40 902.20
4802 51 902.20
4802 52 002.20
4802 53 112.20
4802 53 192.20
4802 53 902.20
4802 60 102.20
4802 60 902.20
4803 00 102.20
4803 00 312.20
4803 00 392.20
4803 00 902.20
4804 11 912.20
4804 11 952.20
4804 11 992.20
4804 19 512.20
4804 19 552.20
4804 19 592.20
4804 19 912.20
4804 19 952.20
4804 19 992.20
4804 21 902.20
4804 29 902.20
4804 31 902.20
4804 39 512.20
4804 39 592.20
4804 39 902.20
4804 41 912.20
4804 41 992.20
4804 42 902.20
4804 49 902.20
4804 51 902.20
4804 52 902.20
4804 59 902.20
4805 10 002.20
4805 21 002.20
4805 22 102.20
4805 22 902.20
4805 23 002.20
4805 29 102.20
4805 29 902.20
4805 30 102.20
4805 30 902.20
4805 40 002.20
4805 50 002.20
4805 60 102.20
4805 60 302.20
4805 60 902.20
4805 70 112.20
4805 70 192.20
4805 70 902.20
4805 80 112.20
4805 80 192.20
4805 80 902.20
4806 10 002.50
4806 20 002.50
4806 30 002.50
4806 40 102.50
4806 40 902.50
4807 10 002.50
4807 91 002.50
4807 99 112.50
4807 99 192.50
4807 99 902.50
4808 10 102.70
4808 10 902.70
4808 20 002.50
4808 30 002.50
4808 90 002.50
4809 10 002.20
4809 20 102.20
4809 20 902.20
4809 90 002.20
4810 11 102.20
4810 11 902.20
4810 12 002.20
4810 21 002.20
4810 29 102.20
4810 29 902.20
4810 31 002.20
4810 32 902.20
4810 39 002.20
4810 91 102.20
4810 91 302.20
4810 91 902.20
4811 10 002.20
4811 21 002.20
4811 29 002.20
4811 39 002.20
4811 40 002.20
4811 90 002.20
4812 00 002.50
4813 90 902.20
4815 00 002.70
4816 10 002.20
4816 20 102.20
4816 20 902.20
4816 30 002.20
4816 90 002.20
4817 10 0032.20
4817 20 0032.20
4817 30 0032.20
4818 10 102.20
4818 10 902.20
4818 20 102.70
4818 20 912.70
4818 20 992.70
4818 30 002.70
4818 40 112.50
4818 40 132.50
4818 40 192.50
4818 40 912.50
4818 50 002.70
4818 90 102.50
4818 90 902.70
4819 10 0032.20
4819 20 1032.20
4819 20 9032.20
4819 30 002.70
4819 40 002.70
4819 50 002.70
4819 60 002.70
4820 10 1032.20
4820 10 3032.20
4820 10 5032.20
4820 10 9032.20
4820 20 0032.20
4820 30 0032.20
4820 40 1032.20
4820 40 9032.20
4820 50 0032.20
4820 90 0032.20
4821 10 102.50
4821 10 902.50
4821 90 102.50
4821 90 902.50
4822 10 002.70
4822 90 002.70
4823 11 902.20
4823 19 002.20
4823 20 002.20
4823 30 002.70
4823 40 002.70
4823 51 102.20
4823 51 902.20
4823 59 102.20
4823 59 902.20
4823 60 102.70
4823 60 902.70
4823 70 102.70
4823 70 902.70
4823 90 512.20
4823 90 712.20
4823 90 792.20
4823 90 902.70
Chapter 51
5111 11 004.83.72.70
5111 19 104.83.72.70
5111 19 904.83.72.70
5111 20 006.34.83.52.20
5111 30 106.34.83.52.20
5111 30 306.34.83.52.20
5111 30 906.34.83.52.20
5111 90 916.34.83.52.20
5111 90 936.34.83.52.20
5111 90 996.34.83.52.20
5112 11 004.83.72.70
5112 19 104.83.72.70
5112 19 904.83.72.70
5112 90 916.34.83.52.20
5112 90 936.34.83.52.20
5112 90 996.34.83.52.20
Chapter 52
5204 11 003.72.82.10
5204 19 003.72.82.10
5204 20 002.20
5205 11 003.72.82.10
5205 12 003.72.82.10
5205 13 003.72.82.10
5205 14 003.72.82.10
5205 15 103.72.82.10
5205 15 903.72.82.10
5205 21 003.72.82.10
5205 22 003.72.82.10
5205 23 003.72.82.10
5205 24 003.72.82.10
5205 25 103.72.82.10
5205 25 303.72.82.10
5205 25 902.50
5205 31 003.72.82.10
5205 32 003.72.82.10
5205 33 003.72.82.10
5205 34 003.72.82.10
5205 35 103.72.82.10
5205 35 903.72.82.10
5205 41 003.72.82.10
5205 42 003.72.82.10
5205 43 003.72.82.10
5205 44 003.72.82.10
5205 45 103.72.82.10
5205 45 303.72.82.10
5205 45 903.72.82.10
5206 11 003.72.82.10
5206 12 003.72.82.10
5206 13 003.72.82.10
5206 14 003.72.82.10
5206 15 103.72.82.10
5206 15 902.50
5206 21 003.72.82.10
5206 22 003.72.82.10
5206 23 003.72.82.10
5206 24 003.72.82.10
5206 25 103.72.82.10
5206 25 902.50
5206 31 003.72.82.10
5206 32 003.72.82.10
5206 33 003.72.82.10
5206 34 003.72.82.10
5206 35 103.72.82.10
5206 35 903.72.82.10
5206 41 003.72.82.10
5206 42 003.72.82.10
5206 43 003.72.82.10
5206 44 003.72.82.10
5206 45 103.72.82.10
5206 45 903.72.82.10
5207 10 002.20
5207 90 002.20
5208 11 106.24.73.52.20
5208 11 906.24.73.52.20
5208 12 116.24.73.52.20
5208 12 136.24.73.52.20
5208 12 156.24.73.52.20
5208 12 196.24.73.52.20
5208 12 916.24.73.52.20
5208 12 936.24.73.52.20
5208 12 956.24.73.52.20
5208 12 996.24.73.52.20
5208 13 006.24.73.52.20
5208 19 006.24.73.52.20
5208 21 106.24.73.52.20
5208 21 906.24.73.52.20
5208 22 116.24.73.52.20
5208 22 136.24.73.52.20
5208 22 156.24.73.52.20
5208 22 196.24.73.52.20
5208 22 916.24.73.52.20
5208 22 936.24.73.52.20
5208 22 956.24.73.52.20
5208 22 996.24.73.52.20
5208 23 006.24.73.52.20
5208 29 006.24.73.52.20
5208 31 006.24.73.52.20
5208 32 116.24.73.52.20
5208 32 136.24.73.52.20
5208 32 156.24.73.52.20
5208 32 196.24.73.52.20
5208 32 916.24.73.52.20
5208 32 936.24.73.52.20
5208 32 956.24.73.52.20
5208 32 996.24.73.52.20
5208 33 006.24.73.52.20
5208 39 006.24.73.52.20
5208 41 006.24.73.52.20
5208 42 006.24.73.52.20
5208 43 006.24.73.52.20
5208 49 006.24.73.52.20
5208 51 006.24.73.52.20
5208 52 106.24.73.52.20
5208 52 906.24.73.52.20
5208 53 006.24.73.52.20
5208 59 006.24.73.52.20
5209 11 006.24.73.52.20
5209 12 006.24.73.52.20
5209 19 006.24.73.52.20
5209 21 006.24.73.52.20
5209 22 006.24.73.52.20
5209 29 006.24.73.52.20
5209 31 006.24.73.52.20
5209 32 006.24.73.52.20
5209 39 006.24.73.52.20
5209 41 006.24.73.52.20
5209 42 006.24.73.52.20
5209 43 006.24.73.52.20
5209 49 106.24.73.52.20
5209 49 906.24.73.52.20
5209 51 006.24.73.52.20
5209 52 006.24.73.52.20
5209 59 006.24.73.52.20
5210 11 106.24.73.52.20
5210 11 906.24.73.52.20
5210 12 006.24.73.52.20
5210 19 006.24.73.52.20
5210 21 106.24.73.52.20
5210 21 906.24.73.52.20
5210 22 006.24.73.52.20
5210 29 006.24.73.52.20
5210 31 106.24.73.52.20
5210 31 906.24.73.52.20
5210 32 006.24.73.52.20
5210 39 006.24.73.52.20
5210 41 006.24.73.52.20
5210 42 006.24.73.52.20
5210 49 006.24.73.52.20
5210 51 006.24.73.52.20
5210 52 006.24.73.52.20
5210 59 006.24.73.52.20
5211 11 006.24.73.52.20
5211 12 006.24.73.52.20
5211 19 006.24.73.52.20
5211 21 006.24.73.52.20
5211 22 006.24.73.52.20
5211 29 006.24.73.52.20
5211 31 006.24.73.52.20
5211 32 006.24.73.52.20
5211 39 006.24.73.52.20
5211 41 006.24.73.52.20
5211 42 006.24.73.52.20
5211 43 006.24.73.52.20
5211 49 116.24.73.52.20
5211 49 196.24.73.52.20
5211 49 906.24.73.52.20
5211 51 006.24.73.52.20
5211 52 006.24.73.52.20
5211 59 006.24.73.52.20
5212 11 106.24.73.52.20
5212 11 906.24.73.52.20
5212 12 106.24.73.52.20
5212 12 906.24.73.52.20
5212 13 106.24.73.52.20
5212 13 906.24.73.52.20
5212 14 106.24.73.52.20
5212 14 906.24.73.52.20
5212 15 106.24.73.52.20
5212 15 906.24.73.52.20
5212 21 106.24.73.52.20
5212 21 906.24.73.52.20
5212 22 106.24.73.52.20
5212 22 906.24.73.52.20
5212 23 106.24.73.52.20
5212 23 906.24.73.52.20
5212 24 106.24.73.52.20
5212 24 906.24.73.52.20
5212 25 106.24.73.52.20
5212 25 906.24.73.52.20
Chapter 53
5309 11 113.52.60
5309 11 193.52.60
5309 11 903.52.60
5309 19 103.52.60
5309 19 903.52.60
5309 21 103.52.60
5309 21 903.52.60
5309 29 103.52.60
5309 29 903.52.60
5310 10 902.30
5311 00 103.52.60
Chapter 54
5401 10 112.20
5401 10 192.20
5401 20 102.30
5402 10 102.20
5402 10 902.20
5402 20 002.20
5402 31 102.20
5402 31 302.20
5402 31 902.20
5402 32 002.20
5402 33 102.20
5402 33 902.20
5402 39 102.20
5402 39 902.20
5402 41 102.20
5402 41 302.20
5402 41 902.20
5402 42 002.20
5402 43 102.20
5402 43 902.20
5402 49 102.20
5402 49 912.20
5402 49 992.20
5402 51 102.20
5402 51 302.20
5402 51 902.20
5402 52 102.20
5402 52 902.20
5402 59 102.20
5402 59 902.20
5402 61 102.20
5402 61 302.20
5402 61 902.20
5402 62 102.20
5402 62 902.20
5402 69 102.20
5402 69 902.20
5403 10 002.30
5403 20 102.30
5403 20 902.30
5403 31 002.30
5403 32 002.30
5403 33 102.30
5403 33 902.30
5403 39 002.30
5407 10 002.70
5407 20 112.70
5407 20 192.70
5407 20 902.70
5407 30 002.70
5407 41 002.70
5407 42 102.70
5407 42 902.70
5407 43 002.70
5407 44 102.70
5407 44 902.70
5407 51 002.70
5407 52 002.70
5407 53 102.70
5407 53 902.70
5407 54 002.70
5407 60 102.70
5407 60 302.70
5407 60 512.70
5407 60 592.70
5407 60 902.70
5407 71 002.70
5407 72 002.70
5407 73 102.70
5407 73 912.70
5407 73 992.70
5407 74 002.70
5407 81 002.70
5407 82 002.70
5407 83 102.70
5407 83 902.70
5407 84 002.70
5407 91 002.70
5407 92 002.70
5407 93 102.70
5407 93 902.70
5407 94 002.70
5408 10 002.70
5408 21 002.70
5408 22 102.70
5408 22 902.70
5408 23 102.70
5408 23 902.70
5408 24 002.70
5408 31 002.70
5408 32 002.70
5408 33 002.70
5408 34 002.70
Chapter 55
5504 10 0032.20
5504 90 0032.20
5507 00 002.50
5508 10 115.64.23.10
5508 10 195.64.23.10
5508 10 902.20
5508 20 105.64.23.10
5508 20 902.20
5509 11 005.64.23.10
5509 12 005.64.23.10
5509 21 105.64.23.10
5509 21 905.64.23.10
5509 22 105.64.23.10
5509 22 905.64.23.10
5509 31 105.64.23.10
5509 31 905.64.23.10
5509 32 105.64.23.10
5509 32 905.64.23.10
5509 41 105.64.23.10
5509 41 905.64.23.10
5509 42 105.64.23.10
5509 42 905.64.23.10
5509 51 005.64.23.10
5509 52 105.64.23.10
5509 52 905.64.23.10
5509 53 005.64.23.10
5509 59 005.64.23.10
5509 61 105.64.23.10
5509 61 905.64.23.10
5509 62 005.64.23.10
5509 69 005.64.23.10
5509 91 105.64.23.10
5509 91 905.64.23.10
5509 92 005.64.23.10
5509 99 005.64.23.10
5510 11 005.64.23.10
5510 12 005.64.23.10
5510 20 005.64.23.10
5510 30 005.64.23.10
5510 90 005.64.23.10
5511 10 002.20
5511 20 002.20
5511 30 002.20
5512 11 002.70
5512 19 102.70
5512 19 902.70
5512 21 002.70
5512 29 102.70
5512 29 902.70
5512 91 002.70
5512 99 102.70
5512 99 902.70
5513 11 102.70
5513 11 302.70
5513 11 902.70
5513 12 002.70
5513 13 002.70
5513 19 002.70
5513 21 102.70
5513 21 302.70
5513 21 902.70
5513 22 002.70
5513 23 002.70
5513 29 002.70
5513 31 002.70
5513 32 002.70
5513 33 002.70
5513 39 002.70
5513 41 002.70
5513 42 002.70
5513 43 002.70
5513 49 002.70
5514 11 002.70
5514 12 002.70
5514 13 002.70
5514 19 002.70
5514 21 002.70
5514 22 002.70
5514 23 002.70
5514 29 002.70
5514 31 002.70
5514 32 002.70
5514 33 002.70
5514 39 002.70
5514 41 002.70
5514 42 002.70
5514 43 002.70
5514 49 002.70
5515 11 102.70
5515 11 302.70
5515 11 902.70
5515 12 102.70
5515 12 302.70
5515 12 902.70
5515 13 112.70
5515 13 192.70
5515 13 912.70
5515 13 992.70
5515 19 102.70
5515 19 302.70
5515 19 902.70
5515 21 102.70
5515 21 302.70
5515 21 902.70
5515 22 112.70
5515 22 192.70
5515 22 912.70
5515 22 992.70
5515 29 102.70
5515 29 302.70
5515 29 902.70
5515 91 102.70
5515 91 302.70
5515 91 902.70
5515 92 112.70
5515 92 192.70
5515 92 912.70
5515 92 992.70
5515 99 102.70
5515 99 302.70
5515 99 902.70
5516 11 002.70
5516 12 002.70
5516 13 002.70
5516 14 002.70
5516 21 002.70
5516 22 002.70
5516 23 102.70
5516 23 902.70
5516 24 002.70
5516 31 002.70
5516 32 002.70
5516 33 002.70
5516 34 002.70
5516 41 002.70
5516 42 002.70
5516 43 002.70
5516 44 002.70
5516 91 002.70
5516 92 002.70
5516 93 002.70
5516 94 002.70
Chapter 56
5606 00 1032.20
5607 10 0032.20
5607 21 0032.20
5607 29 1032.20
5607 29 9032.20
5607 30 0032.20
5607 41 0032.20
5607 49 1132.20
5607 49 1932.20
5607 49 9032.20
5607 50 1132.20
5607 50 1932.20
5607 50 3032.20
5607 50 9032.20
5607 90 0032.20
5608 11 112.70
5608 11 192.70
5608 11 912.70
5608 11 992.70
5608 19 112.10
5608 19 312.10
Chapter 57
5701 10 102.10
5701 10 912.3 subject to a maximum of 0.6 ECU per m21.8 subject to a maximum of 0.5 ECU per m21.3 subject to a maximum of 0.3 ECU per m20.8 subject to a maximum of 0.2 ECU per m20.3 subject to a maximum of 0.1 ECU per m20
5701 10 932.3 subject to a maximum of 0.6 ECU per m21.8 subject to a maximum of 0.5 ECU per m21.3 subject to a maximum of 0.3 ECU per m20.8 subject to a maximum of 0.2 ECU per m20.3 subject to a maximum of 0.1 ECU per m20
5701 10 992.3 subject to a maximum of 0.6 ECU per m21.8 subject to a maximum of 0.5 ECU per m21.3 subject to a maximum of 0.3 ECU per m20.8 subject to a maximum of 0.2 ECU per m20.3 subject to a maximum of 0.1 ECU per m20
5701 90 102.10
5702 31 102.10
5702 31 302.10
5702 31 902.10
5702 32 102.10
5702 32 902.10
5702 39 102.10
5702 39 902.10
5702 41 102.10
5702 41 902.10
5702 42 102.10
5702 42 902.10
5702 49 102.10
5702 49 902.10
5702 51 002.10
5702 52 002.10
5702 59 002.10
5702 91 002.10
5702 92 002.10
5702 99 002.10
5703 10 103.52.60
5703 10 903.52.60
5703 20 113.52.60
5703 20 193.52.60
5703 20 913.52.60
5703 20 993.52.60
5703 30 113.52.60
5703 30 193.52.60
5703 30 513.52.60
5703 30 593.52.60
5703 30 913.52.60
5703 30 993.52.60
5703 90 103.52.60
5703 90 903.52.60
5705 00 102.10
5705 00 312.10
5705 00 392.10
5705 00 902.10
Chapter 58
5801 10 009.37.15.23.30
5801 21 006.24.73.52.20
5801 22 009.37.15.23.30
5801 23 009.37.15.23.30
5801 24 009.37.15.23.30
5801 25 009.37.15.23.30
5801 26 009.37.15.23.30
5801 31 002.70
5801 32 009.37.15.23.30
5801 33 009.37.15.23.30
5801 34 009.37.15.23.30
5801 35 009.37.15.23.30
5801 36 009.37.15.23.30
5801 90 109.37.15.23.30
5801 90 909.37.15.23.30
5802 11 002.50
5802 19 002.50
5802 20 009.37.15.23.30
5803 90 302.50
5803 90 502.70
5803 90 903.52.60
5804 10 903.22.40
5804 21 102.82.10
5804 21 902.82.10
5804 29 102.82.10
5804 29 902.82.10
5804 30 003.22.40
5807 90 9032.20
5810 10 903.22.40
Chapter 59
5902 10 902.70
5902 20 902.70
5902 90 902.70
5903 10 1032.20
5903 10 9032.20
5903 20 1032.20
5903 20 9032.20
5903 90 1032.20
5903 90 9132.20
5903 90 9932.20
5905 00 313.52.60
5905 00 393.52.60
5906 99 1032.20
Chapter 60
6001 10 0032.20
6001 21 0032.20
6001 22 0032.20
6001 29 1032.20
6001 29 9032.20
6001 91 1032.20
6001 91 3032.20
6001 91 5032.20
6001 91 9032.20
6001 92 1032.20
6001 92 3032.20
6001 92 5032.20
6001 92 9032.20
6001 99 1032.20
6001 99 9032.20
6002 10 1032.20
6002 20 1032.20
6002 20 3132.20
6002 20 3932.20
6002 20 5032.20
6002 20 7032.20
6002 20 9032.20
6002 30 1032.20
6002 41 0032.20
6002 42 1032.20
6002 42 3032.20
6002 42 5032.20
6002 42 9032.20
6002 43 1132.20
6002 43 1932.20
6002 43 3132.20
6002 43 3332.20
6002 43 3532.20
6002 43 3932.20
6002 43 5032.20
6002 43 9132.20
6002 43 9332.20
6002 43 9532.20
6002 43 9932.20
6002 49 0032.20
6002 91 0032.20
6002 92 1032.20
6002 92 3032.20
6002 92 5032.20
6002 92 9032.20
6002 93 1032.20
6002 93 3132.20
6002 93 3332.20
6002 93 3532.20
6002 93 3932.20
6002 93 9132.20
6002 93 9932.20
6002 99 0032.20
Chapter 61
6101 10 103.52.60
6101 10 903.52.60
6101 20 103.52.60
6101 20 903.52.60
6101 30 103.52.60
6101 30 903.52.60
6101 90 103.52.60
6101 90 903.52.60
6102 10 103.52.60
6102 10 903.52.60
6102 20 103.52.60
6102 20 903.52.60
6102 30 103.52.60
6102 30. 903.52.60
6102 90 103.52.60
6102 90 903.52.60
6103 11 003.52.60
6103 12 003.52.60
6103 19 003.52.60
6103 21 003.52.60
6103 22 003.52.60
6103 23 003.52.60
6103 29 003.52.60
6103 31 003.52.60
6103 32 003.52.60
6103 33 003.52.60
6103 39 003.52.60
6103 41 103.52.60
6103 41 903.52.60
6103 42 103.52.60
6103 42 903.52.60
6103 43 103.52.60
6103 43 903.52.60
6103 49 103.52.60
6103 49 913.52.60
6103 49 993.52.60
6104 11 003.52.60
6104 12 003.52.60
6104 13 003.52.60
6104 19 003.52.60
6104 21 003.52.60
6104 22 003.52.60
6104 23 003.52.60
6104 29 003.52.60
6104 31 003.52.60
6104 32 003.52.60
6104 33 003.52.60
6104 39 003.52.60
6104 41 003.52.60
6104 42 003.52.60
6104 43 003.52.60
6104 44 003.52.60
6104 49 003.52.60
6104 51 003.52.60
6104 52 003.52.60
6104 53 003.52.60
6104 59 003.52.60
6104 61 103.52.60
6104 61 903.52.60
6104 62 103.52.60
6104 62 903.52.60
6104 63 103.52.60
6104 63 903.52.60
6104 69 103.52.60
6104 69 913.52.60
6104 69 993.52.60
6105 10 004.83.72.70
6105 20 104.83.72.70
6105 20 904.83.72.70
6105 90 104.83.72.70
6105 90 904.83.72.70
6106 10 003.52.60
6106 20 003.52.60
6106 90 103.52.60
6106 90 303.52.60
6106 90 503.52.60
6106 90 903.52.60
6107 11 004.83.72.70
6107 12 004.83.72.70
6107 19 004.83.72.70
6107 21 004.83.72.70
6107 22 004.83.72.70
6107 29 004.83.72.70
6107 91 003.52.60
6107 92 003.52.60
6107 99 003.52.60
6108 11 104.83.72.70
6108 11 904.83.72.70
6108 19 104.83.72.70
6108 19 904.83.72.70
6108 21 004.83.72.70
6108 22 004.83.72.70
6108 29 004.83.72.70
6108 31 104.83.72.70
6108 31 904.83.72.70
6108 32 114.83.72.70
6108 32 194.83.72.70
6108 32 904.83.72.70
6108 39 004.83.72.70
6108 91 003.52.60
6108 92 003.52.60
6108 99 103.52.60
6108 99 903.52.60
6109 10 004.83.72.70
6109 90 104.83.72.70
6109 90 304.83.72.70
6109 90 904.83.72.70
6110 10 102.60
6110 10 313.52.60
6110 10 393.52.60
6110 10 913.52.60
6110 10 993.52.60
6110 20 104.83.72.70
6110 20 913.52.60
6110 20 993.52.60
6110 30 104.83.72.70
6110 30 913.52.60
6110 30 993.52.60
6110 90 103.52.60
6110 90 903.52.60
6111 10 102.10
6111 10 903.32.50
6111 20 102.10
6111 20 903.32.50
6111 30 102.10
6111 30 903.32.50
6111 90 002.10
6112 11 003.52.60
6112 12 003.52.60
6112 19 003.52.60
6112 20 003.52.60
6112 31 903.52.60
6112 39 903.52.60
6112 41 903.52.60
6112 49 903.52.60
6113 00 903.52.60
6114 10 003.52.60
6114 20 003.52.60
6114 30 003.52.60
6114 90 003.52.60
6115 11 004.83.72.70
6115 12 004.83.72.70
6115 19 104.83.72.70
6115 19 904.83.72.70
6115 20 114.83.72.70
6115 20 194.83.72.70
6115 20 904.83.72.70
6115 91 004.83.72.70
6115 92 004.83.72.70
6115 93 304.83.72.70
6115 93 914.83.72.70
6115 93 994.83.72.70
6115 99 004.83.72.70
6116 10 102.10
6116 91 002.10
6116 92 002.10
6116 93 002.10
6116 99 002.10
6117 10 003.52.60
6117 20 003.52.60
6117 80 903.52.60
Chapter 62
6201 11 003.52.60
6201 12 103.52.60
6201 12 903.52.60
6201 13 103.52.60
6201 13 903.52.60
6201 19 003.52.60
6201 91 003.52.60
6201 92 003.52.60
6201 93 003.52.60
6201 99 003.52.60
6202 11 003.52.60
6202 12 103.52.60
6202 12 903.52.60
6202 13 103.52.60
6202 13 903.52.60
6202 19 003.52.60
6202 91 003.52.60
6202 92 003.52.60
6202 93 003.52.60
6202 99 003.52.60
6203 11 003.52.60
6203 12 003.52.60
6203 19 103.52.60
6203 19 303.52.60
6203 19 903.52.60
6203 21 003.52.60
6203 22 103.52.60
6203 22 903.52.60
6203 23 103.52.60
6203 23 903.52.60
6203 29 113.52.60
6203 29 193.52.60
6203 29 903.52.60
6203 31 003.52.60
6203 32 103.52.60
6203 32 903.52.60
6203 33 103.52.60
6203 33 903.52.60
6203 39 113.52.60
6203 39 193.52.60
6203 39 903.52.60
6203 41 103.52.60
6203 41 303.52.60
6203 41 903.52.60
6203 42 113.52.60
6203 42 313.52.60
6203 42 333.52.60
6203 42 353.52.60
6203 42 513.52.60
6203 42 593.52.60
6203 42 903.52.60
6203 43 113.52.60
6203 43 193.52.60
6203 43 313.52.60
6203 43 393.52.60
6203 43 903.52.60
6203 49 113.52.60
6203 49 193.52.60
6203 49 313.52.60
6203 49 393.52.60
6203 49 503.52.60
6203 49 903.52.60
6204 11 003.52.60
6204 12 003.52.60
6204 13 003.52.60
6204 19 103.52.60
6204 19 903.52.60
6204 21 003.52.60
6204 22 103.52.60
6204 22 903.52.60
6204 23 103.52.60
6204 23 903.52.60
6204 29 113.52.60
6204 29 193.52.60
6204 29 903.52.60
6204 31 003.52.60
6204 32 103.52.60
6204 32 903.52.60
6204 33 103.52.60
6204 33 903.52.60
6204 39 113.52.60
6204 39 193.52.60
6204 39 903.52.60
6204 41 003.52.60
6204 42 003.52.60
6204 43 003.52.60
6204 44 003.52.60
6204 49 103.52.60
6204 49 903.52.60
6204 51 003.52.60
6204 52 003.52.60
6204 53 003.52.60
6204 59 103.52.60
6204 59 903.52.60
6204 61 103.52.60
6204 61 803.52.60
6204 61 903.52.60
6204 62 113.52.60
6204 62 313.52.60
6204 62 333.52.60
6204 62 353.52.60
6204 62 513.52.60
6204 62 593.52.60
6204 62 903.52.60
6204 63 113.52.60
6204 63 193.52.60
6204 63 313.52.60
6204 63 393.52.60
6204 63 903.52.60
6204 69 113.52.60
6204 69 193.52.60
6204 69 313.52.60
6204 69 393.52.60
6204 69 503.52.60
6204 69 903.52.60
6205 10 004.83.72.70
6205 20 004.83.72.70
6205 30 004.83.72.70
6205 90 104.83.72.70
6205 90 904.83.72.70
6206 10 004.83.72.70
6206 20 003.52.60
6206 30 003.52.60
6206 40 003.52.60
6206 90 103.52.60
6206 90 903.52.60
6207 11 004.83.72.70
6207 19 004.83.72.70
6207 21 004.83.72.70
6207 22 004.83.72.70
6207 29 004.83.72.70
6207 91 003.52.60
6207 92 003.52.60
6207 99 003.52.60
6208 11 003.22.40
6208 19 103.22.40
6208 19 903.22.40
6208 21 003.22.40
6208 22 003.22.40
6208 29 003.22.40
6208 91 103.52.60
6208 91 903.22.40
6208 92 103.52.60
6208 92 903.22.40
6208 99 003.22.40
6210 10 103.22.40
6210 10 913.22.40
6210 10 993.22.40
6210 20 003.52.60
6210 30 003.52.60
6210 40 003.52.60
6210 50 003.52.60
6211 11 003.52.60
6211 12 003.52.60
6211 20 003.52.60
6211 31 003.52.60
6211 32 103.52.60
6211 32 903.52.60
6211 33 103.52.60
6211 33 903.52.60
6211 39 003.52.60
6211 41 003.52.60
6211 42 103.52.60
6211 42 903.52.60
6211 43 103.52.60
6211 43 903.52.60
6211 49 003.52.60
6213 10 002.50
6213 20 002.50
6213 90 002.50
Chapter 63
6301 20 1032.20
6301 20 915.23.92.90
6301 20 995.23.92.90
6301 30 1032.20
6301 30 902.82.10
6301 40 1032.20
6301 90 1032.20
6302 10 1032.20
6302 10 9032.20
6302 21 004.83.72.70
6302 22 904.83.72.70
6302 29 104.83.72.70
6302 29 904.83.72.70
6302 31 104.83.72.70
6302 31 904.83.72.70
6302 32 904.83.72.70
6302 39 104.83.72.70
6302 39 304.83.72.70
6302 39 904.83.72.70
6302 40 0032.20
6302 51 104.83.72.70
6302 51 904.83.72.70
6302 52 004.83.72.70
6302 53 904.83.72.70
6302 59 004.83.72.70
6302 60 004.83.72.70
6302 91 104.83.72.70
6302 91 904.83.72.70
6302 92 004.83.72.70
6302 93 904.83.72.70
6302 99 004.82.70
6303 11 0032.20
6303 12 0032.20
6303 19 0032.20
6303 91 004.83.72.70
6303 92 904.83.72.70
6303 99 904.83.72.70
6304 11 0032.20
6304 19 104.83.72.70
6304 19 304.83.72.70
6304 91 0032.20
6305 10 902.10
6305 31 1032.20
6306 11 003.52.60
6306 12 003.52.60
6306 19 003.52.60
6306 21 003.52.60
6306 22 003.52.60
6306 29 003.52.60
6306 31 003.52.60
6306 39 003.52.60
6306 41 003.52.60
6306 91 003.52.60
6307 10 1032.20
6307 90 1032.20
Chapter 64
6401 10 1053.82.80
6401 10 9053.82.80
6401 91 1053.82.80
6401 91 9053.82.80
6401 92 1053.82.80
6401 92 9053.82.80
6401 99 1053.82.80
6401 99 9053.82.80
6402 11 0053.82.80
6402 19 0053.82.80
6402 20 0053.82.80
6402 30 1053.82.80
6402 30 9053.82.80
6402 91 1053.82.80
6402 91 9053.82.80
6402 99 1053.82.80
6402 99 3153.82.80
6402 99 3953.82.80
6402 99 5053.82.80
6402 99 9153.82.80
6402 99 9553.82.80
6402 99 9953.82.80
6403 11 0032.20
6403 19 0032.20
6403 20 0032.20
6403 30 0032.20
6403 40 0032.20
6403 51 1132.20
6403 51 1532.20
6403 51 1932.20
6403 51 9132.20
6403 51 9532.20
6403 51 9932.20
6403 59 1132.20
6403 59 3132.20
6403 59 3532.20
6403 59 3932.20
6403 59 5032.20
6403 59 9132.20
6403 59 9532.20
6403 59 9932.20
6403 91 1132.20
6403 91 1532.20
6403 91 1932.20
6403 91 9132.20
6403 91 9532.20
6403 91 9932.20
6403 99 1132.20
6403 99 3132.20
6403 99 3532.20
6403 99 3932.20
6403 99 5032.20
6403 99 9132.20
6403 99 9532.20
6403 99 9932.20
6404 11 007.55.74.22.70
6404 19 107.55.74.22.70
6404 19 907.55.74.22.70
6404 20 107.55.74.22.70
6404 20 907.55.74.22.70
6405 90 107.55.74.22.70
Chapter 69
6907 10 0032.20
6907 90 1032.20
6907 90 9132.20
6907 90 9332.20
6907 90 9932.20
6908 90 312.20
6908 90 512.20
6908 90 912.20
6908 90 932.20
6908 90 992.20
6910 10 002.50
6910 90 002.50
6911 10 003.32.50
6911 90 003.32.50
6912 00 502.60
6913 10 002.20
6913 90 912.20
6913 90 932.20
6913 90 992.20
Chapter 70
7010 90 1032.20
7010 90 212.20
7010 90 312.20
7010 90 412.20
7010 90 432.20
7010 90 452.20
7010 90 472.20
7010 90 512.20
7010 90 532.20
7010 90 552.20
7010 90 572.20
7010 90 612.20
7010 90 672.20
7010 90 712.20
7010 90 772.20
7010 90 812.20
7010 90 872.20
7010 90 992.20
7012 00 903.12.30
7013 10 0032.20
7013 21 1132.20
7013 21 1932.20
7013 21 9132.20
7013 21 9932.20
7013 29 1032.20
7013 29 5132.20
7013 29 5932.20
7013 29 9132.20
7013 29 9932.20
7013 31 1032.20
7013 31 9032.20
7013 32 0032.20
7013 39 1032.20
7013 39 9132.20
7013 39 9932.20
7013 91 1032.20
7013 91 9032.20
7013 99 1032.20
7013 99 9032.20
7016 10 002.50
7018 10 192.50
7018 90 902.50
7019 10 102.30
7019 10 512.30
7019 10 592.30
7019 10 992.30
7019 20 112.30
7019 20 312.30
7019 20 352.30
7019 20 902.30
7019 31 002.30
7019 90 102.30
7019 90 302.30
7019 90 912.30
7019 90 992.30
Chapter 71
7117 19 102.10
7117 19 912.10
7117 19 992.10
Chapter 72
7201 20 002.50
7202 11 102.50
7202 11 902.50
7202 99 112.50
7207 19 113.72.82.10
7207 19 152.70
7207 19 312.70
7207 20 513.72.82.10
7207 20 552.70
7207 20 572.70
7207 20 712.70
7208 11 002.30
7208 12 102.30
7208 12 912.30
7208 12 992.30
7208 13 102.30
7208 13 912.30
7208 13 992.30
7208 14 102.30
7208 14 902.30
7208 21 102.30
7208 21 902.30
7208 22 102.30
7208 22 912.30
7208 22 992.30
7208 23 102.30
7208 23 912.30
7208 23 992.30
7208 24 102.30
7208 24 902.30
7208 31 002.70
7208 32 1032.20
7208 32 3032.20
7208 32 5132.20
7208 32 5932.20
7208 32 9132.20
7208 32 9932.20
7208 33 1032.20
7208 33 9132.20
7208 33 9932.20
7208 34 1032.20
7208 34 9032.20
7208 35 1032.20
7208 35 912.70
7208 35 932.70
7208 35 992.70
7208 41 002.70
7208 42 1032.20
7208 42 3032.20
7208 42 5132.20
7208 42 5932.20
7208 42 9132.20
7208 42 9932.20
7208 43 1032.20
7208 43 9132.20
7208 43 9932.20
7208 44 1032.20
7208 44 9032.20
7208 45 1032.20
7208 45 912.70
7208 45 932.70
7208 45 992.70
7208 90 1032.20
7209 12 102.70
7209 12 902.70
7209 13 102.70
7209 13 903.32.50
7209 14 102.70
7209 14 903.32.50
7209 22 102.70
7209 22 902.70
7209 23 102.70
7209 23 903.32.50
7209 24 102.70
7209 24 913.32.50
7209 24 993.32.50
7209 32 102.70
7209 32 902.70
7209 33 102.70
7209 33 903.32.50
7209 34 102.70
7209 34 903.32.50
7209 42 102.70
7209 42 902.70
7209 43 102.70
7209 43 903.32.50
7209 44 102.70
7209 44 903.32.50
7209 90 1032.20
7210 11 1032.20
7210 12 1132.20
7210 12 1932.20
7210 20 1032.20
7210 31 1032.20
7210 39 1032.20
7210 41 1032.20
7210 49 1032.20
7210 50 1032.20
7210 60 1132.20
7210 60 1932.20
7210 70 1132.20
7210 70 1932.20
7210 90 3132.20
7210 90 3332.20
7210 90 3532.20
7210 90 3932.20
7211 11 002.70
7211 12 102.30
7211 12 9032.20
7211 19 102.30
7211 19 9132.20
7211 19 9932.20
7211 21 002.70
7211 22 102.30
7211 22 9032.20
7211 29 102.30
7211 29 9132.20
7211 29 9932.20
7211 30 1032.20
7211 41 913.32.50
7211 90 1132.20
7212 10 1032.20
7212 10 9132.20
7212 21 1132.20
7212 29 1132.20
7212 30 1132.20
7212 40 1032.20
7212 40 9132.20
7212 50 3132.20
7212 50 5132.20
7212 60 1132.20
7212 60 9132.20
7213 10 0032.20
7213 20 0032.20
7213 31 0032.20
7213 39 0032.20
7213 41 0032.20
7213 50 0032.20
7214 20 002.70
7214 30 002.70
7214 40 102.70
7214 40 912.70
7214 40 992.70
7214 50 102.70
7214 50 912.70
7214 50 992.70
7214 60 002.70
7215 90 102.30
7216 10 002.70
7216 21 002.70
7216 22 002.70
7216 31 002.70
7216 32 002.70
7216 33 002.70
7216 40 102.70
7216 40 902.70
7216 50 102.70
7216 50 902.70
7216 90 102.30
7218 90 503.72.82.10
7219 11 103.72.82.10
7219 11 903.72.82.10
7219 12 103.72.82.10
7219 12 903.72.82.10
7219 13 103.72.82.10
7219 13 903.72.82.10
7219 14 103.72.82.10
721914 903.72.82.10
7219 21 103.72.82.10
7219 21 903.72.82.10
7219 22 103.72.82.10
7219 22 903.72.82.10
7219 23 103.72.82.10
7219 23 903.72.82.10
7219 24 103.72.82.10
7219 24 903.72.82.10
7219 33 103.72.82.10
7219 33 903.72.82.10
7219 34 103.72.82.10
7219 34 903.72.82.10
7219 35 103.72.82.10
7219 35 903.72.82.10
7219 90 113.72.82.10
7219 90 193.72.82.10
7220 11 003.72.82.10
7220 12 003.72.82.10
7220 90 113.72.82.10
7220 90 313.72.82.10
7221 00 103.72.82.10
7221 00 903.72.82.10
7222 10 113.72.82.10
7222 10 193.72.82.10
7222 10 913.72.82.10
7222 10 993.72.82.10
7222 30 103.12.30
7222 40 113.72.82.10
7222 40 193.72.82.10
7222 40 303.12.30
7224 90 303.72.82.10
7225 10 103.72.82.10
7225 10 913.72.82.10
7225 10 993.72.82.10
7225 20 113.72.82.10
7225 20 303.72.82.10
7225 30 003.72.82.10
7225 40 103.72.82.10
7225 40 303.72.82.10
7225 40 503.72.82.10
7225 40 703.72.82.10
7225 40 903.72.82.10
7225 90 103.72.82.10
7226 10 103.72.82.10
7226 10 303.72.82.10
7226 20 103.72.82.10
7226 20 513.72.82.10
7226 20 713.72.82.10
7226 91 003.72.82.10
7226 99 113.72.82.10
7226 99 313.72.82.10
7227 10 003.72.82.10
7227 20 003.72.82.10
7227 90 103.72.82.10
7227 90 903.72.82.10
7228 10 103.72.82.10
7228 10 303.12.30
7228 20 113.72.82.10
7228 20 193.72.82.10
7228 20 303.12.30
7228 30 103.72.82.10
7228 30 903.72.82.10
7228 60 103.12.30
7228 70 103.72.82.10
7228 70 313.12.30
7228 80 103.72.82.10
7228 80 902.30
Chapter 73
7301 10 002.70
7302 10 312.70
7302 10 392.70
7302 20 002.30
7302 40 102.30
7302 90 102.30
7304 10 102.50
7304 10 302.50
7304 10 902.50
7304 20 912.50
7304 20 992.50
7304 31 912.50
7304 31 992.50
7304 39 102.20
7304 39 302.20
7304 39 512.50
7304 39 592.50
7304 39 912.50
7304 39 932.50
7304 39 992.50
7304 41 902.50
7304 49 102.20
7304 49 912.50
7304 49 992.50
7304 51 112.20
7304 51 192.50
7304 51 912.50
7304 51 992.50
7304 59 102.20
7304 59 312.20
7304 59 392.50
7304 59 912.50
7304 59 932.50
7304 59 992.50
7304 90 902.50
7305 11 002.50
7305 12 002.50
7305 19 002.50
7305 20 102.50
7305 20 902.50
7305 31 002.50
7305 39 002.50
7305 90 002.50
7306 10 112.50
7306 10 192.50
7306 10 902.50
7306 20 002.50
7306 30 212.50
7306 30 292.50
7306 30 302.50
7306 30 512.50
7306 30 592.50
7306 30 712.50
7306 30 792.50
7306 30 902.50
7306 40 912.50
7306 40 992.50
7306 50 912.50
7306 50 992.50
7306 60 312.50
7306 60 392.50
7306 60 902.50
7306 90 002.50
7313 00 002.20
Chapter 76
7604 10 102.50
7604 10 902.50
7604 21 002.50
7604 29 102.50
7604 29 902.50
7605 11 002.50
7605 19 102.50
7605 19 902.50
7605 21 002.50
7605 29 102.50
7605 29 902.50
7606 12 102.50
7606 91 002.50
7606 92 002.50
7607 11 102.50
7607 11 902.50
7607 19 102.50
7607 19 902.50
7607 20 102.50
7607 20 902.50
7608 10 912.50
7608 10 992.50
7608 20 302.50
7608 20 912.50
7608 20 992.50
Chapter 81
8101 99 002.50
8102 99 002.50
8109 90 002.20
8112 99 302.20
Chapter 82
8211 10 004.23.22.30
8211 91 904.23.22.30
8211 92 904.23.22.30
8211 93 904.23.22.30
8211 94 0032.20
8215 10 104.23.22.30
8215 20 104.23.22.30
8215 99 104.23.22.30
Chapter 84
8407 21 112.50
8407 21 192.50
8452 10 1932.20
8470 21 0032.20
8482 10 102.20
8482 10 902.20
8482 20 002.20
8482 30 002.20
8482 40 002.20
8482 50 002.20
8482 80 002.20
8482 91 102.20
8482 91 902.20
8482 99 002.20
Chapter 85
8501 10 102.10
8506 11 102.10
8506 11 902.10
8506 12 002.10
8506 13 002.10
8506 19 102.10
8506 19 902.10
8506 20 002.10
8506 90 002.10
8519 10 002.30
8519 21 002.30
8519 29 002.30
8519 31 002.30
8519 39 002.30
8519 40 002.30
8519 91 912.30
8519 91 992.30
8519 99 102.30
8527 21 103.52.60
8527 21 903.52.60
8527 29 003.52.60
8527 31 103.52.60
8527 31 913.52.60
8527 31 993.52.60
8527 39 103.52.60
8527 39 913.52.60
8527 39 993.52.60
8527 90 9132.20
8527 90 993.52.60
8528 10 403.52.60
8528 10 503.52.60
8528 10 603.52.60
8528 10 713.52.60
8528 10 733.52.60
8528 10 793.52.60
8528 10 913.52.60
8528 10 993.52.60
8528 20 103.52.60
8528 20 713.52.60
8528 20 733.52.60
8528 20 793.52.60
8528 20 903.52.60
8540 11 103.72.82.10
8540 11 303.72.82.10
8540 11 903.72.82.10
8540 12 103.72.82.10
8540 12 303.72.82.10
8540 12 903.72.82.10
8541 10 102.20
8541 10 913.52.60
8541 10 993.52.60
8541 21 102.20
8541 21 903.52.60
8541 29 102.20
8541 29 903.52.60
8541 30 102.20
8541 30 903.52.60
8541 40 103.52.60
8541 50 102.20
8541 50 903.52.60
8542 11 102.20
8542 11 303.52.60
8542 11 713.52.60
8542 11 753.52.60
8542 11 913.52.60
8542 11 993.52.60
8542 19 102.20
8542 19 203.52.60
8542 19 303.52.60
8542 19 503.52.60
8542 19 703.52.60
8542 19 903.52.60
8542 20 003.52.60
8542 80 003.52.60
8546 20 102.50
8546 20 912.50
8546 20 992.50
8547 10 102.50
8547 10 902.50
Chapter 87
8701 20 1053.82.80
8701 20 9053.82.80
8701 30 002.70
8701 90 112.10
8701 90 152.10
8701 90 212.10
8701 90 252.10
8701 90 312.10
8701 90 352.10
8701 90 392.10
8701 90 502.10
8701 90 902.70
8702 10 1153.82.80
8702 10 1953.82.80
8702 10 912.70
8702 10 992.70
8702 90 1153.82.80
8702 90 1953.82.80
8702 90 312.70
8702 90 392.70
8702 90 903.12.30
8703 10 102.50
8703 10 903.12.30
8703 21 102.50
8703 21 902.50
8703 22 102.50
8703 22 902.50
8703 23 102.50
8703 23 902.50
8703 24 102.50
8703 24 902.50
8703 31 102.50
8703 31 902.50
8703 32 102.50
8703 32 902.50
8703 33 102.50
8703 33 902.50
8703 90 103.12.30
8703 90 902.50
8704 10 114.23.22.30
8704 10 902.50
8704 21 315.54.130
8704 21 395.54.130
8704 21 912.70
8704 21 992.70
8704 22 912.70
8704 22 992.70
8704 23 915.54.130
8704 23 995.54.130
8704 31 315.54.130
8704 31 395.54.130
8704 31 912.70
8704 31 992.70
8704 32 912.70
8704 32 992.70
8704 90 002.50
8706 00 1153.82.80
8706 00 192.30
8706 00 992.70
8707 10 902.10
8707 90 902.10
8711 10 002.20
8711 20 102.20
8711 20 912.20
8711 20 992.20
8711 30 002.20
8711 40 002.20
8711 50 002.20
8711 90 002.20
8712 00 102.60
8712 00 902.60
Chapter 88
8801 90 912.20
8802 11 903.72.82.10
8802 20 9032.20
Chapter 90
9002 11 002.50
9002 19 002.50
9002 20 102.50
9002 20 902.50
9002 90 912.50
9002 90 992.50
9011 10 002.50
9011 20 002.50
9011 80 002.50
9011 90 002.50
9030 20 902.70
9030 39 302.70
9030 89 912.70
Chapter 91
9113 20 002.10
Chapter 94
9405 91 112.50
9405 91 192.20
Chapter 95
9501 00 102.60
9501 00 902.60
9503 30 102.10
9503 49 102.10
9503 60 102.10
Chapter 96
9607 11 002.82.10
9607 19 003.52.60
9607 20 112.82.10
9607 20 192.82.10
9607 20 913.52.60
9607 20 993.52.60
9617 00 113.22.40
9617 00 193.22.40
9617 00 903.22.40

Article 3 and 4

SCHEDULE 2CUSTOMS DUTIES-BEEF AND VEAL MARKET ORGANISATION PRODUCTS

Combined Nomenclature Code:Rates of Duty for Marketing Years
(1)(2)
88/8989/9090/9191/9292/93
0102.90.10108642
0102.90.31108642
0102.90.33108642
0102.90.35108642
0102.90.37108642
0201.10.1012.5107.552.5
0201.10.9012.5107.552.5
0201.20.1112.5107.552.5
0201.20.1912.5107.552.5
0201.20.3112.5107.552.5
0201.20.3912.5107.552.5
0201.20.5112.5107.552.5
0201.20.5912.5107.552.5
0201.20.9012.5107.552.5
0201.30.0012.5107.552.5
0202.10.0012.5107.552.5
0202.20.1012.5107.552.5
0202.20.3012.5107.552.5
0202.20.5012.5107.552.5
0202.20.9012.5107.552.5
0202.30.1012.5107.552.5
0202.30.5012.5107.552.5
0202.30.9012.5107.552.5
0206.10.914.33.52.61.70.8
0206.22.904.33.52.61.70.8
0206.10.992.521.510.5
0206.21.002.521.510.5
0206.29.992.521.510.5
0206.10.9512.5107.552.5
0206.29.9112.5107.552.5
0210.20.101512963
0210.20.901512963
0210.90.411512963
0210.90.4912.5107.552.5
0210.90.9012.5107.552.5
1502.00.913.12.51.81.20.6
1602.50.1012.5107.552.5
1602.90.6112.5107.552.5
1602.50.9016.2139.76.53.2
1602.90.6916.2139.76.53.2
1602.90.9916.2139.76.53.2
1902.20.3016.2139.76.53.2

Article 5

SCHEDULE 3TOTAL EXEMPTIONS FROM CUSTOMS DUTIES

Combined Nomenclature Code:Description of Goods
(1)(2)
ex 0302.70.00 and ex 0303.80.00

Hard fish roes, fresh, chilled or frozen

ex 0303.79.99

Red snapper (Lutjanus purpureus)

ex 0303.79.99

Sturgeons, fresh, chilled or frozen, whole, headless or in pieces, intended for processing (1)(2)

ex 0303.80.00

Soft roes, frozen, intended for the manufacture of deoxyribonucleic acid (DNA)(1)

ex 0305.20.00

Hard fish roes, salted or in brine

ex 0306.19.90 and ex 0306.29.90

Krill for processing (1)

ex 0711.90.50

Mushrooms, excluding cultivated mushrooms within the meaning of subheading 0709.51.10, in salted or sulphur water, or to which other substances ensuring their temporary preservation have been added, but not specially for immediate consumption

ex 0712.30.00

Mushrooms, excluding cultivated mushrooms within the meaning of subheading 0709.51.10, dried, dehydrated or evaporated, whole or in identifiable slices or pieces, intended for treatment other than simple repacking for retail sale (1)(3)

ex 0713.33.90

Beans, white, dried, of the species Phaseolus vulgaris, of which not more than 2% by weight are retained by a screen with apertures of 8mm in diameter

ex 0804.10.00

Dates, fresh or dried, intended for the processing industry, other than for the production of alcohol (1)

ex 0804.10.00

Dates, fresh or dried, for packing for retail sale into immediate packings of a net capacity not exceeding 11 kg (1)

ex 0810.40.50

Large American cranberries, fresh (Vaccinium macrocarpum)

ex 0810.90.90

Rose hips, fresh

ex 0811.90.50, ex 0811.90.70 and ex 0811.90.90

Fruit of the genus Vaccinium, whether or not cooked, in frozen state, not containing added sugar

ex 0811.90.90

Rose hips, whether or not cooked, in frozen state not containing added sugar

ex 0811.90.90

Dates, frozen, in immediate packings of a net capacity of 5 kg or more, not intended for the production of alcohol (1)

ex 1302.14.00

Extract of dewaxed pyrethrum

ex 1604.11.00 and ex 1604.20.10

Salmon for the processing industry for manufacture into pastes or spreads (1)

ex 1604.30.90

Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine

ex 1605.10.00

Crabs of the species "King" (Paralithodes camchaticus), "Hanasaki" (Paralithodes brevipes), "Kegani" (Erimacrus isenbecki), "Queen" and "Snow" (Chionoecetes spp.), "Red" (Geryon quinquedens), "Rough stone" (Neolithides asperrimus), Lithodes antarctica, "Mud" (Scylla serrata), "Blue" (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net capacity of 2 kg or more

ex 2309.90.10

Fish or marine mammal solubles

ex 2710.00.59

Mixture of hydrocarbons, consisting of 85% or more of linear paraffins by weight, with chain lengths of eight to 16 carbon atoms, and of not more than 13% of alkylbenzenes by weight, with linear chains of 10 to 12 carbon atoms

ex 2712.20.00

Synthetic paraffin wax having a molecular weight of not less than 460 and not more than 1,560

ex 2712.90.90

I-Alkenes containing C 18 to C 30 carbon chains

ex 2805.30.10

Alloys of cerium and other rare earth metals containing not less than 47% by weight of cerium

ex 2819.90.00

Chromium dioxide

ex 2835.26.00

Pentacalcium hydroxide tris(orthophosphate) for use in non-ferrous metallurgy (1)

ex 2845.10.00 and ex 2845.90.10

Deuterium, deuterium oxide (heavy water) and other compounds of deuterium; hydrogen and compounds thereof enriched in deuterium, mixtures and solutions containing these products (Euratom)

ex 2903.30.39

Dibromomethane

ex 2905.19.10

Potassium-tert-butoxide

ex 2905.39.90

Butane-1,3-diol

ex 2905.39.90

2,4,7,9-Tetramethyldec-5-yne-4,7-diol

ex 2905.39.90

Hexane-1,6-diol

ex 2906.11.00

Menthol

ex 2916.19.90

Methacryloyl chloride

ex 2916.19.90

Butyl perchlorocrotonate

ex 2917.39.90

Tetrabromophtalic anhydride

ex 2917.39.90

Benzene-1,2,4-tricarboxylic acid

ex 2917.39.90

Benzene-1,2,4-tricarboxylic acid 1,2-anhydride

ex 2917.39.90

Benzene-1,2,4-tricarbonyl trichloride

ex 2917.39.90

4-Methylphtalic anhydride

ex 2921.59.00

m-Phenylenebis(methylamine)

ex 2922.29.00

Dobutamine (INN) and its salts

ex 2926.90.90

(−)-N-(alpha-Cyano-4-hydroxy-3-methoxy-alpha-methylphenethyl)-acetamide

ex 2926.90.90

2-(3-Phenoxyphenyl)propiononitrile

ex 2929.10.00

Methylenedicyclohexyl di-isocyanate, mixed isomers

ex 2929.10.00

p-Phenylene diisocyanate

ex 2929.10.00

trans-(Cyclohex-1,4-ylene diisocyanate), for the production of thermoplastic polyurethane elastomers (1)

ex 2929.10.00

3-3'-Dimethylbiphenyl-4-4'-diyldiisocyanate

ex 2929.90.00

0,0-Bis(4-tert-butylphenyl)-N-cyclohexylphosphoramidothioate

ex 2939.30.00

Caffeine and its salts

ex 2940.00.90

Ribose

ex 2940.00.90

Sucrose benzoate, having a saponification equivalent of not more than 175

ex 3208.90.10 and ex 3909.50.00

Polyurethane of 2,2'-(tert-butylimino)diethanol and 4,4'-methylenedicyclohexyl di-isocyanate dissolved in N,N-dimethylacetamide, with a polymer content of not less than 48% by weight

ex 3208.90.10 ex 3911.90.90

Copolymer of p-cresol and divinylbenzene, dissolved in N,N-dimethylacetamide, with a polymer content of not less than 48% by weight

ex 3505.10.50

0-(2-hydroxyethyl)amylopectin hydrolysate

ex 3901.20.00

Polyethylene containing not less than 35% and not more than 45% by weight of mica.

ex 3901.20.00

Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, having a density of not less than 0,958 g/cm3 at 23°C and containing by weight not more than:

  • 50 ppm aluminium

  • 2 ppm calcium

  • 2 ppm chromium

  • 2 ppm of iron

  • 2 ppm of nickel

  • 2 ppm of titanium

  • 8 ppm vanadium

for the manufacture of chlorosulphonated polyethylene (a)

ex 3901.20.00

Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, having a density of not less than 0,945 and not more than 0,985 g/cm3 for the manufacture of typewriter ribbon or similar ribbon (a)

ex 3901.90.00

Ionomer resin consisting of a salt of a copolymer of ethylene and methacrylic acid

ex 3901.90.00

Ionomer resin consisting of a salt of a terpolymer of ethylene, isobutyl acrylate and methacrylic acid

ex 3901.90.00

Copolymers of ethylene with acrylic acid, or with methacrylic acid, containing not less than 16% and not more than 30% of acrylic acid or methacrylic acid or methacrylic acid by weight, in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3901.90.00 and ex 3902.90.00

An A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing not more than 35% by weight of styrene, in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3902.90.00

Poly(1-ethylethylene) (polybutene-1) in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3903.90.00

Brominated polystyrene containing not less than 58% and not more than 71% by weight of bromine, in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3903.90.00

Copolymer, entirely of maleic anhydride and styrene, whether or not containing a styrene-butadiene block copolymer in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3903.90.00 and ex 3921.11.00

Copolymers, solely of allyl alcohol with styrene, which have an acetyl value of not less than 175

ex 3904.40.00

Copolymers of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight not less than 87% and not more than 92% of vinyl chloride, not less than 2% and not more than 9% of vinyl acetate and not less than 1% and not more than 8% of vinyl alcohol, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39

ex 3904.50.00

Copolymers of vinylidene chloride and acrylonitrile, in the form of expandable beads of a diameter not less than four and not more than 20 μm

ex 3904.50.00

Copolymers of vinylidene chloride with vinyl chloride, containing not less than 79.5% by weight of vinylidene chloride, in one of the forms mentioned in note 3 (a) and (b) to Chapter 39, for the manufacture of fibres, monofil or strip (1)

ex 3904.69.00

Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3904.69.00

Terpolymer of ethylene with chlorotrifluoroethylene and hexafluoro(2-methylpropene) in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3904.69.00

Copolymer of tetrafluoroethylene and hexafluoropropene compounded with not less than 1% and not more than 51% by weight of one of the following barium sulphate, dibismuth trioxide, dibismuth carbonate dioxide, or tungsten in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3904.69.00

Polyvinyl fluoride in one of the forms mentioned in note 3 (b) to Chapter 39

ex 3905.90.00

Polyvinyl formal, in one of the forms mentioned in note 3 (b) to Chapter 39, having a molecular weight not less than 10,000 and not more than 40,000 and containing, by weight:

  • not less than 9,5% and not more than 13% of the acetyl groups, expressed as vinyl acetate,

  • not less than 5% and not more than 6,5% of the hydroxy groups, expressed as vinyl alcohol

ex 3906.90.00

Polymerization products of acrylic acid with small quantities of a polyunsaturated monomer for use as a thickener in textile pigment printing pastes or in the manufacture of products falling within heading No. 3003 (a)

ex 3906.90.00

Terpolymer of ethylene, methyl acrylate and a monomer containing a non-terminal carboxy group as a substituent, whether or not compounded with silica

ex 3906.90.00

Copolymer of acrylic acid and 2-ethylhexyl acrylate, containing not less than 10% and not more than 11% by weight of 2-ethylhexyl acrylate

ex 3906.90.00

Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]

ex 3906.90.00

Copolymers of 2-di-isopropylaminoethyl methacrylate and decyl methacrylate dissolved in N,N-dimethylacetamide, with a copolymer content of not less than 55% by weight

ex 3906.90.00

Polymerization products of acrylic acid, with alkyl, with methacrylate and small quantities of other monomers for use as thickeners in the manufactures of textile printing pastes (1)

ex 3906.90.00

Copolymer of acrylonitrile and methylacrylate modified with polybutadieneacrylonitrile (NBR)

ex 3911.90.90

Alternating copolymer of ethylene and maleic anhydride, for use as a thickener in textile pigment printing pastes (1)

ex 3911.90.90

Polymerization products of (polybutadiene)polyol and two lactams N,N'-linked by the bivalent acyl radical of a dicarboxylic acid

ex 3919.90.31, ex 3920.62.00 and ex 3921.90.19

Reflecting laminated sheeting, metallized, consisting of one sheet of polyester and at least another sheet of polyester or other plastic material and coated on one side with an adhesive, whether or not protected by a release sheet

ex 3919.90.31, ex 3920.62.00, ex 3920.63.00, ex 3920.69.00 and ex 3921.90.19

Reflecting polyester sheeting in which microspheres are embedded

ex 3919.90.50

Polyvinyl chloride sheeting, of a thickness of less than 1mm, coated with an adhesive in which are embedded hollow glass balls having a diameter of not more than 100 micrometres

ex 3919.90.50, ex 3920.59.00 and ex 3921.90.60

Laminated reflecting film of acrylic polymers and isocyanate cross-linking agents, containing embedded glass microspheres metallized with aluminium, which reflect light back to the source of incident light (retro-reflecting), coated on one side with an adhesive

ex 3919.90.50, ex 3920.59.00 and ex 3921.90.60

Reflecting sheeting of an acrylic polymer modified by melamine-formaldehyde, containing glass microspheres

ex 3919.90.50, ex 3920.59.00 and ex 3921.90.60

Reflecting polyacrylic sheeting in which microspheres are embedded

ex 3919.90.50, ex 3920.59.00 and ex 3921.90.60

Laminated reflecting film of acrylic polymer, one layer of which is embossed with a prismatic pattern which reflects light back to the source of incident light (retro-reflecting), coated on one side with an adhesive

ex 3920.10.11

Polyethylene film of a thickness of not less than 20 and not more than 40 micrometres, for the production of photo-resist film used in the manufacture of semiconductors (a)

ex 3920.10.11

Laminated plastic sheet or strip, either:

  • having a width of not less than 190 mm, and consisting of one layer of biaxially orientated polyamide film coated on one side with polyvinylidene chloride and on the other side with a layer of polyethylene film

    or

  • having a width of not more than 15 mm, and consisting of one layer of biaxially orientated polyamide film and two layers of polyethylene film

ex 3920.10.11 and ex 3920.10.19

Film of a copolymer of ethylene with methyl acrylate, having a thickness of not more than 0,05 mm, for the manufacture of disposable medical gloves (a)

ex 3920.10.19, ex 3920.10.90 and ex 3920.99.50

Film of a thickness of not more than 1 mm of a copolymerization product of vinyl alcohol with ethylene containing no other polymerization products or copolymerization products, with an extension at break (longitudinal or transversal) of not less than 65%

ex 3920.10.90

Copolymer of ethylene with propylene in the form of strip of a width of no less than 18 mm and not more than 27 mm or not less than 58 and not more than 90 cm and of a thickness not exceeding 1 mm, which, after being extended at 23°C to twice the original length, returns to its original length, with a tolerance of not more than +15%, within a period of two minutes

ex 3920.10.90

Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched, polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent

ex 3920.10.90

Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched fibrils of a mixture of polyethylene and a polyethylene copolymer, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent

ex 3920.20.90

Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched fibrils of polypropylene modified by an organic acid, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent

ex 3920.42.10

Reflecting polyvinyl chloride sheeting, wholly embossed on one side in a regular pyramidal pattern

ex 3920.59.00

Copolymerization products of acrylic and methacrylic esters, in the form of film with a thickness not exceeding 150 μm

ex 3920.62.00, ex 3920.63.00 and ex 3920.69.00Reflecting polyester sheeting embossed in a regular pyramidal pattern
ex 3920.62.00 and ex 3921.90.19

Polyester film, dyed in the mass, of a thickness of not more than 25 μm and metallized on one side

ex 3920.62.00, ex 3920.63.00, ex 3920.69.00 and ex 3921.90.19

Transparent film consisting of polyester coated with a layer of indium and silver

ex 3920.62.00

Polyester film, having a thickness of not less than 74 μm and not more than 76 μm, for use in the manufacture of flexible magnetic discs (floppy disks) (1)

ex 3920.62.00, ex 3920.63.00 and ex 3921.90.19

Polyester film having a thickness of not more than 70 μm, coated on one side with a substance which becomes coloured when heated to not more than 100°C in the presence of salicyclic acid

ex 3920.62.00, ex 3920.63.00 and ex 3921.90.19

Polyester film having a thickness of not more than 10 μm, coated on one side with salicyclic acid

ex 3920.69.00

Iridescent film of polyester and poly(methyl methacrylate)

ex 3920.69.00

Polycondensation products of terephthalic acid with a mixture cyclohex-1,4-ylenedimethanol and ethane-1,2-diol in the form of a film

ex 3920.91.00

Polyvinyl butyral film having a graduated coloured band

ex 3920.99.50

Polyvinyl fluoride sheet

ex 3920.99.50 and ex 3921.90.60

Ion-exchange membranes in fluorinated plastic material, for use in chlor-alkali electrolytic cells (1)

ex 3920.99.50

Poly(1-chlorotrifluoroethylene) film

ex 3920.20.90

Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15%, containing polyvinyl alcohol dissolved in water as the moistening agent

ex 3920.99.50 and ex 3921.90.60

Sheet of a thickness of not less than 1 mm and not more than 3 mm, consisting of a copolymer of ethylene with chlorotrifluoroethylene, whether or not backed with a woven glass fibre fabric

ex 3920.99.50

Films and sheets of a copolymer of ethylene with chlorotrifluoroethylene, with a thickness of not less than 12 and not more than 400 μm

ex 3920.99.50

Microporous polytetrafluoroethylene film, coated on one side with a polymer permeable to water vapour, not less than 30 cm in width and weighing not more than 50 g/m2

ex 3920.99.50

Microporous polytetrafluoroethylene film of a width of not more than 30 cm and weighing not more than 22,4 g/m2

ex 3920.99.50

Films of a thickness of not more than 1 mm, entirely of polyvinyl alcohol, containing not more than 2% by weight of unhydrolyzed acetate groups expressed as vinyl acetate and not less than 5% and not more than 15% by weight of glycerol as a plasticizer, not soluble in water at temperatures below 85°C

ex 3920.99.50

Polyvinyl alcohol film coated on both sides having a total thickness of less than 1 mm and with an extension at break (longitudinal or transversal) of not less than 65%

ex 3920.99.50

Polyvinyl alcohol film containing not less than 99% by weight of polyvinyl alcohol, uncoated, with a thickness of not more than 1 mm

ex 3920.99.50

Film of a mixture of polyvinylidene fluoride and of an acrylic polymer having a thickness not less than 40 micrometres and not more than 60 micrometres

ex 4010.91.00

Conveyor belts of synthetic rubber having a width of not less than 31,0 and not more than 31,5 cm and a total length of not less than 96,0 and not more than 100 cm, for use in photocopiers (1)

ex 4502.00.00

Natural cork, debacked or roughly squared, or in rectangular (including square) blocks, plates, sheets or strip (including sharp-edged blanks for corks or stoppers)

ex 4823.90.90

Strips of paper glued to one another to form a honeycomb with a maximum height of 13 cm, impregnated with a copper-based preservative

ex 5402.49.99 and ex 5402.69.90

Yarn of polytetrafluorethylene

ex 5402.49.99, ex 5402.59.90 and ex 5402.69.90

Yarn of polyvinyl alcohol, soluble in water at a temperature of 50°C, for use in the manufacture of weftless "felts" for papermaking machines (1)

ex 5402.49.99

Yarn of a copolymer of glycollic acid and lactic acid for the manufacture of surgical sutures (1)

ex 5402.69.90

Yarn wholly of polyglycollic acid

ex 5402.49.99

Yarn of poly(1,4-dioxanone)

ex 5402.49.99, ex 5402.59.90 and ex 5402.69.90

Non-textured filament yarn of poly(vinyl alcohol), for the manufacture of sleeves for printing rollers (1)

ex 5402.41.30 and ex 5402.41.90

Yarn of synthetic textile fibres exclusively of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid

ex 5402.41.10

Polyamide yarn, not textured, untwisted or with not more than 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) and a copolyamide for the manufacture of knee-length stockings falling within subheadings 6115.20.11 and 6115.93.30, women's stockings falling within subheadings 6115.93.10 and 6115.93.91 or panty hose (tights) falling within subheading 6115.11 (1)

ex 5402.39.10

Texturized yarn of polypropylene, impregnated with silicone-based water-repellant

ex 5407.71.00

Woven fabrics of polyvinyl alcohol fibres, for machine embroidery

ex 5407.71.00 and ex 5903.90.99

Woven poly(tetrafluoroethylene) fibre fabric coated or covered on one side with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side chains ending in carboxylic acid or sulphonic acid groups in the potassium or sodium salt form, whether or not coated on the same side with a metallic inorganic compound

ex 5504.10.00

Fibres entirely of modal (ISO)

ex 7019.90.10

Non-textile glass fibres having a diameter of less than four μm

ex 7019.31.00

Webs, felts, thin sheets and similar products of non-textile glass fibres, of a weight per square metre of not more than 120 g and a fibre diameter, excluding any coating, of not more than 7 μm, for the manufacture of filtration products (1)

ex 7019.10.59

Yarns of 33 tex±7,5%, or a multiple thereof obtained from continuous spun glass filaments having a diameter of not less than 2,5 μm and not more than 5,1 μm, other than those treated so as to improve their adhesion to elastomers

ex 7019.10.59

Yarns obtained from continuous spun glass filaments having a diameter of not less than 12,5 μm and not more than 13,5 μm treated with resorcino-formaldehyde, of not less than 340 tex and not more than 680 tex

ex 7019.10.59

Yarns of 22 tex spun from continuous glass filaments having a diameter of not less than 4,7 and not more than 5,5 μm

ex 7019.10.59

Yarns of 33, 34 or 51 tex±7,5%, or a multiple thereof, spun from continuous glass filaments having a diameter of not less than 5,8 μm and not more than 7,1 μm

ex 8506.19.10

Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 28 connecting pins and incorporating a control circuit

ex 8506.19.10

Lithium iodine single cell battery with dimensions of 45×9×23 mm and a voltage not exceeding 2,8 V

ex 8506.19.90

Dry zinc/carbon batteries of a voltage of not less than 5,5 and not more than 6,5 and of a size not exceeding 110×90×5 mm, for incorporation in film cassettes for instant pictures (1)

ex 8540.11

Cathode-ray tubes (colour) equipped with a perforated mask (so-called "dot mask") with electron guns placed in a triangle ("delta" technique) or placed side by side ("in-line" technique) with convergence errors of not more than 0,8 mm in the corners, having a diagonal angle of deflection not exceeding 90° and with maximum colour dot spacing of less than 0,4 mm

ex 8541.10.91

Silicon power rectifier diodes of planar technology, with a recovery time of less than 100 nanoseconds, a maximum recurring reverse voltage of 200 V, and average conducting-state, current of 2,5 A, contained in a housing the exterior dimensions of which do not exceed 11×17 mm

ex 8541.10.99

Germanium-gold diodes with forward voltage not exceeding 1 V at 5 mA

ex 8541.29.90

Transistor with a power of not less than 150 W at a voltage of not less than 160 V and with a cut-off frequency of not less than 20 MHz, contained in a housing the exterior dimensions of which do not exceed 37×22 mm, with not more than 3 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 2 SA 1170

    • 2 SC 2774

    • 2 SA 1215

    • 2 SC 2921

    • 2 SA 1494

    • 2 SC 3858

    or

  • other identification markings relating to power transistors complying with the abovementioned description

ex 8541.40.10

Light emitting diode (LED) made from a gallium-based semiconductor compound, mounted in a rectangular housing the exterior dimensions of which do not exceed 4×20×21 mm, with two connecting pins, and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • LT 9305

    • SLF 209

    • LT 9306

    • SLF 909

    or

  • other identification markings relating to LEDs, complying with the abovementioned description, for use in the manufacture of radio broadcast receivers and sound recorders or reproducers (a)

ex 8541.40.10

Assembly consisting of not more than 10 light-emitting diodes (LEDs) made from a gallium-based semiconductor compound, mounted in a rectangular housing the exterior dimensions of which do not exceed 68×25×4 mm, with not more than 20 connecting pins, and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • LT 9355

    or

  • other identification markings relating to assemblies complying with the abovementioned description, for use in the manufacture of radio broadcast receivers and sound recorders or reproducers (a)

ex 8541.40.10

Laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing having a diameter of not more than 10 mm and a height of not more than 7 mm, with 3 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • LT 022

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8541.40.10 ex 8542.20.00

Digital displays, consisting of a printed circuit board of a size not exceeding 35×90 mm with a single line of characters, not less than three in number, comprising light-emitting diodes made from gallium-based semiconductor compounds mounted thereon. Each character is composed of up to eight segments with or without a decimal point and the line of characters has a protective cover of plastic

ex 8542.11.30

Electrically erasable, programmable read-only memories (so-called E2PROMs), in the form of an unmounted monolithic integrated circuit (chip) with a storage capacity of 16 Kbits, used in the manufacture of microwave systems for the identification of persons and objects (a)

ex 8542.11.71

Static random access memories of C-MOS technology (C-MOS S-RAMs) in the form of a monolithic integrated circuit with a storage capacity of 16×4 bits, an access time not exceeding 35 ns, contained in a housing the exterior dimensions of which do not exceed 9×21 mm, with not more than 16 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combination of figures and letters:

    • CY7C189

    • CY7C190

    • CY74S189

    • CY54S189

    • CY27S03

    • CY27S07

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Static random access memories of C-MOS technology (C-MOS S-RAMs) in the form of a monolithic integrated circuit with a storage capacity of 256×4 bits and an access time not exceeding 60 ns, contained in a housing the exterior dimensions of which do not exceed 12×29 mm, with not more than 22 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • CY7C122

    • CY93422

    • CY93L422

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Static, random-access memory of C-MOS technology (C-MOS S-RAM) with a storage capacity of 2 K×8 bits and with a nominal standby power of 0,005 milliwatts at 25°C in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters

    • TC5516APL-2

    • TC5517CPL-15

    • TC5517BPL-20

    • TC5516AFL-2

    • TC5517CPL-20

    • TC5517BPL-25

    • TC5516APL

    • TC5517CFL-15

    • TC5517BFL-20

    • TC65516AFL

    • TC5517CFL-20

    • TC65517BFL-25

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Non-volatile memory in the form of a monolithic integrated circuit, consisting of a C-MOS S-RAM, with a capacity of 16 K bits and internal power supply, contained in a housing the exterior dimensions of which do not exceed 19×36 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • DS 1220 Y

    • MK 48 Z 02 (B)

    or

  • other identification markings relating to non-volatile memories complying with the abovementioned description

ex 8542.11.71

Static, random access memory of C-MOS technology (C-MOS S-RAM) with a storage capacity of 32 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combinations of figures and letters:

    • TC 5532

    or

  • other identifying markings relating to C-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Static, random-access memories of C-MOS technology (C-MOS S-RAMs), with a storage capacity of 8 K×8 bits with an access time of not less than 80 nanoseconds, in the form of a monolithic integrated circuit, contained in a plastic housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combination of figures and letters:

    • TC5564PL-15

    • HM6264P-10

    • MB8464A-10

    • PD4464C-15

    • TC5564PL-20

    • HM6264P-12

    • MB8464A-10L

    • PD4464C-20

    • TC5565PL-12

    • HM6264P-15

    • MB8464A-10LL

    • PD4464G-15

    • TC5565PL-15

    • HM6264LP-10

    • MB8464A-15

    • PD4464G-20

    • TC5565FL-12

    • HM6264LP-12

    • MB8464A-15L

    • TC5565FL-15

    • HM6264LP-15

    • MB8464A-15LL

    • TC5565PL-12L

    • MB8464A-12

    • TC5565PL-15L

    • MB8464-12L

    • TC5565FL-12L

    • MB8464-12LL

    • TC5565FL-15L

    • MB8464-15

    • MB8464-15L

    • MB8464-15LL

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Non-volatile memory consisting of a static read/write random access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 64 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×42 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • DS 1225 Y

    or

  • an identification markings relating to non-volatile memories complying with the abovementioned description:

ex 8542.11.71

Static random access memories (S-RAMs) of C-MOS technology, with a storage capacity of 256 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39×17 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • HM 62256, PD 43256 C, TC 55257 P

    or

  • other identification markings relating to S-RAMs complying with the abovementioned description

ex 8542.11.71

Non-volatile memory in the form of a monolithic integrated circuit, consisting of a static C-MOS random access memory, with a storage capacity of 256 K bits and built-in energy source, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • DS 1230

    or

  • other identification markings relating to non-volatile memories complying with the abovementioned description

ex 8542.11.71

Static random-access memories of N-MOS (including H-MOS) technology (N-MOS S-RAMs) with a storage capacity of 256×4 bits with access time not exceeding 25 nano/seconds in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • 9122-25

    • 91 L 22-25

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Static random-access memories of N-MOS (including H-MOS) technology (N-MOS S-RAMs) with a storage capacity of 8 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • 4008

    • 8112

    • 4118

    • 8114

    • 4801

    • 8185

    • 8104

    • PD 421

    • 8108

    or

  • other identification markings relating to N-MOS S-RAMs complying with the abovementioned description

ex 8542.11.71

Static read/write random-access memories N-MOS (including H-MOS) technology (N/H-MOS RAMs, static), with a storage capacity of 72 K bits, in the form of a monolithic integrated circuit, contained in a housing whose dimensions do not exceed 10×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • TMM 2089

    or

  • other identification markings relating to static, read/write memories complying with the abovementioned description

ex 8542.11.71

Static random-access memories of bipolar technology (bipolar S-RAMs) in the form of a monolithic integrated circuit and with a storage capacity of 64×9 bits, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 82 S 09

    • MBM 93419

    or

  • other identification markings relating to bipolar S-RAMs complying with the abovementioned description

ex 8542.11.71

Static random access memories of bipolar technology (bipolar S-RAMs) in the form of a monolithic integrated circuit, consisting of a substrate layer on which are mounted either 1 or 2 chips each having a storage capacity of 1 K bit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 23 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 770639

    • 770823

    • 5120360

    • 7379769

    or

  • other identification markings relating to bipolar S-RAMs complying with the abovementioned description

ex 8542.11.71

Static memories consisting of two stacked substrate layers with one or two static random access memories of bipolar technology (bipolar S-RAMs), in the form of monolithic integrated circuits, each with a storage capacity of 1 K bit and with a maximum storage capacity of 4 K bits, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 23 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 770965

    • 4599497

    • 7379442

    or

  • other identification markings relating to static memories complying with the abovementioned description

ex 8542.11.71

Static, random-access memories of TTL technology (TTL S-RAMs) with a storage capacity of 1 K bit and an access time not exceeding 45 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×30 mm, with not more than 22 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 93422

    • 93425

    or

  • other identification markings relating to TTL S-RAMs complying with the abovementioned description

ex 8542.11.71

Dynamic random access memories of C-MOS technology (C-MOS D-RAMs) with a storage capacity of 256 K bits in the form of a monolithic integrated circuit, contained in a housing whose external dimensions do not exceed 17×34 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • P 51 C 256

    • P 51 C 259

    or

  • other identification markings relating to C-MOS D-RAMs complying with the abovementioned description

ex 8542.11.71

Dual port dynamic random access memory (D-RAM) of N-MOS (including H-MOS) technology, with data registers and a serial read output control, with a storage capacity of 256 K bits in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×39 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • MB 81461

    • PD 41264

    or

  • other identification markings relating to D-RAMs complying with the abovementioned description

ex 8542.11.71

Random access memories of ECL technology (ECL-RAMs) with a storage capacity of 256×4 bits, and access time not exceeding 8 ns in the form of a monolithic integrated circuit, contained in a housing the dimensions of which do not exceed 11×32 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 10422

    or

  • other identification markings relating to ECL-RAMs complying with the abovementioned description

ex 8542.11.71

Random access memories of ECL technology (ECL-RAMs) with a storage capacity of 4 K bits and an access time not exceeding 50 ns in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 11×32 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 10470

    • 10474

    or

  • other identification markings relating to ECL-RAMs complying with the abovementioned description

ex 8542.11.71

Random access memories of ECL technology (ECL-RAMs) with a storage capacity of 16 K bits and an access time not exceeding 15 ns in the form of a monolithic integrated circuit, contained in a housing the dimensions of which do not exceed 18×37 mm, with not more than 28 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 10480

    • 10484

    • 100484

    or

  • other identification markings relating to ECL-RAMs complying with the abovementioned description

ex 8542.11.71

Dynamic read/write random access memories manufactured in N-MOS (including H-MOS) technology (D-RAMs), in the form of a monolithic integrated circuit, consisting of a substrate layer with not less than two and not more than eight chips having a storage capacity of 128,192 or 256 K bits and a storage capacity of not less than 256 K bits and not more than two megabits, contained in a housing whose dimensions do not exceed 30×30 mm, with not more than 57 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 6025841

    • 6031587

    • 6870392

    • 7379172

    • 6025843

    • 6031591

    • 6870393

    • 7379174

    • 6025856

    • 6870395

    • 7379176

    • 6025858

    • 7379181

    or

  • other identification markings relating to dynamic read/write memories of the type described above

ex 8542.11.71

Read-only memories (ROMs), in the form of a monolithic integrated circuit, with a storage capacity of 16 K×8 bits, with read-register and serial output control, contained in a housing the exterior dimensions of which do not exceed 50×16 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of one of the following combinations of figures or including one of those combinations:

    • from 62000 to 62999

    or

  • other identification markings relating to ROMs complying with the abovementioned description

ex 8542.11.71Programmable, non-erasable, read-only memories (PROMs) of Schottky TTL technology, with a storage of 2 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins or contact areas, and bearing:
  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

  • 27 S 12

  • 5305

  • 6305

  • 76 LS 03

  • 27 S 13

  • 5306

  • 6306

  • 7620

  • 5308

  • 6308

  • 7621

  • 28 L 22

  • 5309

  • 6309

  • 28 LA 22

  • 53 S 240

  • 63 S 240

  • 82 S 114

  • 28 L 2 XMFC

  • 53 S 241

  • 63 S 241

  • 82 S 130

  • 6335

  • 82 S 131

  • 29613

  • 54 S 570

  • 6336

  • 29770

  • 54 S 571

  • 93436

  • 29771

  • 7053

  • 93446

  • 5604

  • 7058

  • 38510

  • 5624

  • MB 7115

  • 74 S 570

  • MB 7116

  • 74 S 571

  • MB 7117

  • MB 7118

or

  • other identification markings relating to PROMs complying with the abovementioned description

ex 8542.11.71

Programmable non-erasable MOS technology read-only memories (PROMs) with a storage capacity of 16 K bits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 39×17 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 7 C 245

    • 7 C 291

    • 7 C 292

    • HM 6616

    or

  • other identification markings relating to PROMs complying with the abovementioned description

ex 8542.11.71

Programmable non-erasable read-only memories (PROMs) of bipolar technology with a storage capacity of 16 K bits and a standby current equal to, or of more than, 50 m A and less than, or equal to, 80 m A in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 33×14 mm, with not more than 24 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 27 PS 191 A

    or

  • other identification markings relating to PROMs complying with the abovementioned description

ex 8542.11.71

Programmable non-erasable read-only memories (PROMs) with a storage of 32 K bits, in the form of a monolithic integrated circuit, whose external dimensions do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 63 S 3281

    • AM 27 S 43

    • MB 7141

    • MB 7142

    or

  • other identification markings relating to PROMs complying with the abovementioned description

ex 8542.11.71

Programmable non-erasable read-only memory (PROM) in the form of a monolithic integrated circuit having a storage capacity of 64 K bits and an access time of not more than 65 nonoseconds, contained in a housing whose external dimensions do not exceed 17×39 mm, with a maximum of 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • CY 7C 261

    • CY 7C 263

    • CY 7C 264

    • CY 7C 268

    • CY 7C 269

    or

  • other identification markings relating to PROMs complying with the abovementioned description

ex 8542.11.71

UV-erasable, programmable, read-only memories (EPROMs) with a storage capacity of 2 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on the upper surface and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 82140 PP

    • AMI 702 ADC

    or

  • other identification markings relating to EPROMs complying with the abovementioned description

ex 8542.11.71

UV-erasable, programmable, read-only memory (EPROM) equipped with a programmable input/output system, with a storage capacity of 2 K×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×52 mm, with a quartz window on the upper face and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • D 8755 A

    • TMP 8755 AC

    or

  • other identification markings relating to memories complying with the abovementioned description

ex 8542.11.71

UV-erasable programmable read-only memory (EPROM) in the form of a monolithic integrated circuit having a storage capacity of 16 K bits and an access time of not more than 65 ns, contained in a housing the external dimensions of which do not exceed 17×39 mm, equipped with a quartz window on its upper surface, and bearing:

  • an identification code consisting of or including one of the following combinations of figures and letters:

    • CY 245 W

    • CY 7C 291 W

    or

  • other identifying codes relating to memories complying with the abovementioned description

ex 8542.11.71

UV-erasable programmable read-only memory (EPROM) in the form of a monolithic integrated circuit having a storage capacity of 64 K bits and an access time of not more than 65 ns, contained in a housing the external dimensions of which do not exceed 17×39 mm, equipped with a quartz window on its upper surface, and bearing:

  • an identification code consisting of or including one of the following combinations of figures and letters:

    • CY 7C 261 W

    • CY 7C 263 W

    • CY 7C 268 W

    • CY 7C 269 W

    or

  • other identifying codes relating to memories complying with the abovementioned description

ex 8542.11.71

Electrically erasable, programmable, read-only memories (E2PROMs) with a storage capacity of 4 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 28 C 04

    • X 2404

    • X 24 C 04

    • X 2804 A

    or

  • other identification markings relating to E2PROMs complying with the abovementioned description

ex 8542.11.71

Electrically erasable, programmable, read-only memories (E2PROMs) with a storage capacity of 16 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 28 C 16

    • 28 C 17

    • 52 B 13

    • 52 B 13 H

    • AM 2817 A

    • X 24 C 16

    • X 2816 A

    or

  • other identification markings relating to E2PROMs complying with the abovementioned description

ex 8542.11.71

Electrically erasable, programmable, read-only memories (E2PROMs) with a storage capacity of 64 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 28 C 64

    • 52 B 33

    • 52 B 33 H

    • MBM 28 C 65

    • MCM 2864

    • X 2864 A

    or

  • other identification markings relating to E2PROMs complying with the abovementioned description

ex 8542.11.71

Electrically erasable, programmable, read-only memories (E2PROMs) with a storage capacity of 128 K bits, in the form of a monolithic circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • X 28128 A

    or

  • other identification markings relating to E2PROMs complying with the abovementioned description

ex 8542.11.71

Electrically erasable, programmable, read-only memories (E2PROMs) with a storage capacity of 256 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 28256

    • 28 C 256

    • 48 C 256

    or

  • other identification markings relating to E2PROMs complying with the abovementioned description

ex 8542.11.71

Monolithic integrated circuit consisting of a static, random-access memory (S-RAM) with a storage capacity of 256 bits superimposed bit-for-bit on a programmable, electrically erasable, read-only-memory (E2PROM), contained in a housing the exterior dimensions of which do not exceed 8×24 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • X 2210

    • X 2443

    • X 2444

    or

  • other identification markings relating to S-RAMs superimposed of E2PROMs complying with the abovementioned description

ex 8542.11.71

Monolithic integrated circuit consisting of a static random-access memory (S-RAM) with a storage capacity of 1 K bit, superimposed bit-for-bit on an electrically erasable, programmable, read-only memory (E2PROM), contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • X 2001

    • X 2201 A

    • X 2212

    or

  • other identifications markings relating to S-RAMs stacked on E2PROMs complying with the abovementioned description

ex 8542.11.71

Monolithic integrated circuit consisting of a static, random-access memory (S-RAM) with a storage capacity of 2 K bits, superimposed bit-for-bit on an electrically erasable, programmable, read-only memory (E2PROM), contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of the following combination of figures and letters:

    • X 2002

    or

  • other identification markings relating to S-RAMs stacked on E2PROMs complying with the abovementioned description

ex 8542.11.71

Monolithic integrated circuit consisting of a static, random-access memory (S-RAM) with a storage capacity of 4 K bits, superimposed bit-for-bit on an electrically erasable, programmable, read-only-memory (E2PROM), contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of the following combination of figures and letters:

    • X 2004

    or

  • other identification markings relating to S-RAMs stacked on E2PROMs complying with the abovementioned description

ex 8542.11.75

8-bit-single-chip microcomputer of C-MOS technology consisting of a random access memory with a capacity of 2 K bits, a programmable read-only memory with a capacity of 64 K bits and a multi-protocol serial communication port, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 52×52 mm, with not more than 68 connecting pins or contact areas and bearing:

  • an identification marking consisting of or containing the following combination of figures and letters:

    • 80 C 152

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.75

Single-chip microcomputer of C-MOS technology, in the form of a monolithic integrated circuit, consisting of an arithmetical logic unit (ALU) with an organization of 4 bits, a read-only memory (ROM) with a storage capacity of 2 K×8 bits, a dual-tone, multi-frequency (DTMF) generator, a random access memory (RAM) with a storage capacity of 1 K bit, whether or not with another random access memory (RAM) with a storage capacity of 512 bits, contained in a housing whose dimensions do not exceed 16×54 mm, with not more than 42 connecting pins and bearing:

  • an identification marking consisting of one of the following combinations of figures and letters:

    • T 6978

    • TCM 8301

    • TCM 8302

    or

  • other identification markings relating to single-chip microcomputers complying with the abovementioned description

ex 8542.11.75

Single-chip microcomputer in C-MOS-technology, in the form of a monolithic integrated circuit consisting of an ALU with a capacity of 32 bits, a ROM with a capacity of 24 K bits and a RAM with a capacity of 2 K bits, contained in a housing the exterior dimensions of which are not less than 30×30 mm, with not less than 84 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • MB 8764

    or

  • other identification markings relating to single-chip microcomputers complying with the abovementioned description

ex 8542.11.75

Single-chip microcomputers, in the form of a monolithic integrated circuit, consisting of an arithmetical unit with a capacity of four bits plus a read-only memory (ROM) with a capacity of not less than 18 K bits and not more than 104 K bits and a random-access memory (RAM) with a capacity of not less than 512 bits and not more than 4 K bits, contained in a housing the exterior dimensions of which do not exceed 20×60 mm, with not more than 80 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • CD 3200-3299

    • TP 0310-03299

    • HD 38800

    • HD 404 189

    • TP 0450-04599

    • HD 38820

    • HD 614 080

    • TMC 0270-0279

    • TP 0480-04899

    • HD 44796

    • TMC 0500-0599

    • TP 0500-05999

    • HD 44800

    • TMC 0980-0989

    • T 7767 BS

    • HD 44801

    • TMC 1500-1599

    • HD 44820

    • TMC 1980-1999

    • HD 44840

    • HD 44860

    • HD 614042

    or

  • other identification markings relating to single-chip microcomputers complying with the abovementioned description

ex 8542.11.75

Single-chip microcomputer, in the form of a monolithic integrated circuit, consisting of an arithmetic-logic unit with a capacity of 8 bits plus an electronic, programmable, read-only memory (EPROM) UV-erasable with a capacity of 32 K bits and a random access memory (RAM) with a capacity of 1 K bit, contained in a housing the exterior dimensions of which do not exceed 16×53 mm, with a quartz window and not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 7742

    • 8751

    or

  • other identification markings relating to single-chip microcomputers complying with the abovementioned description

ex 8542.11.75

Single-chip 8-bit microcomputer of MOS technology, having universal peripheral interface functions, consisting of a central processing unit, a random access read-write memory (RAM) with a storage capacity of 1 K bit, UV-erasable, programmable read-only memory (EPROM) with a storage capacity of 2 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×52 mm, having a quartz window on the upper face, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • D 8742

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.75

8-bit microprocessor of C-MOS technology, consisting of a central processing unit (CPU), a memory controller, a two-channel DMA controller, two-channel programmable 16-bit counter/timer, a wait-state generator, a two-channel asynchronous serial communication interface (ASCI) and a bus controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×26 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • Z 64180

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

ex 8542.11.75

16-bit microprocessor of C-MOS technology, consisting of a central processing unit (CPU), a memory controller, a 2 K bit cache memory, three programmable 16-bit counter/timers, a full duplex universal asynchronous receiver/transmitter (UART) and four DMA channels, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • Z 280

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

ex 8542.11.75

16-bit microprocessor of C-MOS technology, consisting of a central processing unit (CPU) and a 8-bit or 16-bit external data bus, contained in a housing the exterior dimensions of which do not exceed 54×16 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • Z 70108

    • Z 70116

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

ex 8542.11.75

32-bit microprocessor (MPU) of C-MOS technology in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 38×38 mm, with not more than 132 connecting pins and bearing:

  • an identification marking either consisting of or including one of the following combinations of figures and letters:

    • 80386

    • MC 68020

    • MC 68030

    • MC 68032

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.75

8-bit microprocessor of N-MOS (including H-MOS) technology, for the encoding/decoding of data (data ciphering processor), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53×15 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • Z 8068

    • Z 9518

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

ex 8542.11.75

16-bit microprocessor in N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and external chip selection logic, a programmable wait state generator with bus control unit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 80186

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

ex 8542.11.75

16-bit microprocessor of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×82 mm, with not more than 68 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AM 29116

    • SBP 9989

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

ex 8542.11.75

Floating-point arithmetic co-processor of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing whose exterior dimensions do not exceed 30×30 mm, with not more than 80 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters or figures:

    • 80387

    • MC 68881

    • MC 68882

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.75

Text co-processor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins, and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • C 82730

    or

  • other identification markings relating to text co-processors complying with the abovementioned description

ex 8542.11.75

Numeric processor extension unit of N-MOS (including H-MOS) technology (N-MOS NPX) containing not more than 14 registers, in the form of a monolithic intergrated circuit, contained in a package the exterior dimensions of which do not exceed 16×53 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 80287

    • 8087

    • NS 32081

    • TX 32081 W

    or

  • other identification markings relating to N-MOS NPXs complying with the abovementioned description

ex 8542.11.75

Central processing unit of N-MOS (including H-MOS) technology (N-MOS CPU), in the form of a monolithic integrated circuit consisting of a 16×16 bit service memory, a 16×20 bit service memory, a 32×32 bit service memory, an 8×8 bit service memory, a 16 bit register, two 20 bit registers, an 8 bit register, one 12 bit register, a 5 bit counter and timing network, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • LSI-604041855

    or

  • other identification markings relating to N-MOS central processing units complying with the abovementioned description

ex 8542.11.91

Arithmetic-logic of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of one 32 bit register, one 24 bit register, one 4 bit register, twelve 1 bit registers, two 16×24 bit service memories, one logic network performing arithmetic and logic operations, decodifying logic, and error detection and management logic, one 8 bit counter and a timing network, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connecting pins and bearing:

  • the identification marking:

    • ALU 0486

    or

  • other identification markings relating to arithmetic-logic units complying with the abovementioned description

ex 8542.11.91

Logic circuit of N-MOS (including H-MOS) technology (N-MOS LC) serving as a clock generator for central process unit, main memory and input/output interfaces, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • H 108982 (MCC)

    or

  • other identification markings relating to N-MOS logic circuits (N-MOS LCs) complying with the abovementioned description

ex 8542.11.91

Clock generator and controller for microprocessors, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 24×8 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letter:

    • Z 8581

    or

  • other identification markings relating to clock generators and controllers complying with the abovementioned description

ex 8542.11.91

Logic circuit of bipolar technology, with not more than six logic functions, a supply voltage of not less than 11 V and not more than 18 V, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • FZH 101 A

    • FZH 111 A

    • FZH 191

    • FZH 201

    • FZJ 121

    • FZK 101

    or

  • other identification markings relating to logic circuits complying with the abovementioned description

ex 8542.11.91

Logic control circuits of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of one 7 bit register, three timers, one multiplexer sequential and combining networks intended to perform control operations, decodifying logic, error detection and management logic and a timing network, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connecting pins and bearing:

  • the identification marking:

    • MIC 0482

    or

  • other identification markings relating to logic control circuits complying with the abovementioned description

ex 8542.11.91

Field programmable array logics (PALs) of C-MOS-technology, in the form of a monolithic integrated circuit, with fusible links, a programmable AND array, fixed OR array, not more than 32 inputs and not more than 10 outputs, whether or not with registers, contained in a housing the exterior dimensions of which do not exceed 19×39 mm, with not more than 24 connecting pins and bearing:

  • an identification marking either consisting of or including one of the following combinations of figures and letters:

    • 16 P 8

    • 16 RP 4

    • C 16 L 8

    • C 16 R 4

    • C 16 R 6

    • C 16 R 8

    • C 20 G 10

    • C 22 V 10

    or

  • other identification markings relating to PALs complying with the abovementioned description

ex 8542.11.91

Programmable, non-erasable, logic circuits (field programmable logic array) of TTL Schottky technology, with not more than 48 AND functions, not more than eight OR functions, and not more than 16 inputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • FP 54 AS 839

    • FP 74 AS 839

    • 82 S 100

    • FP 54 AS 840

    • FP 74 AS 840

    • 82 S 101

    • SN 54 LS 333

    • SN 74 LS 333

    • SN 54 LS 334

    • SN 74 LS 334

    • 93458

    • SN 54 LS 335

    • SN 74 LS 335

    • 93459

    • SN 54 LS 336

    • SN 74 LS 336

    or

  • other identification markings relating to field programmable logic arrays complying with the abovementioned description

ex 8542.11.91

Non-erasable user-programmable logic sequencer of bipolar technology, having not more than 48 AND functions, a 6-bit state register, an 8-bit output register, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 82 S 105

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.91

UV-erasable programmable logic device (EPLD) of C-MOS technology containing not less than 600 logic gates, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 29×124 mm, with a quartz window on the upper surface, with not more than 24 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combination of figures and letters:

    • EP 600

    • 16 L 8-W

    • 16 R 4-W

    • 16 R 6-W

    • 16 R 8-W

    • 22 V 10-W

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.11.91

Error detection and correction circuit of N-MOS (including H-MOS) technology capable of detecting and correcting single bit errors and detecting all double bit errors, in the form of monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 8206

    or

  • other identification markings relating to N-MOS error detection and correction circuits complying with the abovementioned description

ex 8542.11.91

Burst error processor (BEP) of N-MOS (including H-MOS) technology for detecting and correcting multiple errors derived from a line of magnetic discs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • Z 8065

    • AM 9520

    • AM 9521

    or

  • any other identification markings relating to N-MOS burst error processor complying with the abovementioned description

ex 8542.11.91

Error correction and detection unit (ECDU) of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • 2960

    • 74 F 630

    • 74 F 631

    • 74 LS 630

    • 74 LS 631

    • DP 8400

    or

  • other identification markings relating to error correction and detection units (ECDUs) complying with the abovementioned description

ex 8542.11.91

Control and interface circuit for central processor (CPU-controller) of C-MOS technology in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of letters and figures.

    • 82 C 201

    • 82 C 206

    • FE 2000

    • FE 2010

    • FE 3000

    • FE 3010

    • L 1 A 0392

    or

  • other identification markings relating to control and interfacing circuits complying with the abovementioned discription

ex 8542.11.91

Hard-disc controller of N-MOS (including H-MOS) technology (N-MOS-HDCs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 44 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • HDC 9224

    • PD 7261

    • WD 1010

    • WD 2010

    • WD 5010

    • WD 5011

    or

  • other identification markings relating to N-MOS HDCs complying with the abovementioned description

ex 8542.11.91

4-channel read/write monolithic integrated circuit of bipolar technology for controlling magnetic heads in hard disk units, contained in a housing whose exterior dimensions do not exceed 12×19 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • SSI 510

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.91

Buffer manager and controller of N-MOS (including H-MOS) technology in the form of a monolithic integrated circuit contained in a housing whose exterior dimensions do not exceed 54×17 mm with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • WD 1015

    or

  • other identification markings relating to buffer management control processors complying with the abovementioned description

ex 8542.11.91

Buffer manager and controller of C-MOS technology in the form of a monolithic integrated circuit contained in a house whose exterior dimensions do not exceed 31×31 mm with not more than 84 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • WD 11 C 00-22

    • WD 83 C 580

    • WD 83 C 583

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.11.91

Control circuit for static memory control (S-RAM) with address multiplexing and pulse generation facility, in the form of a monolithic integrated circuit of MOS technology contained in a housing whose dimensions do not exceed 28×54 mm, with not more than 68 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AIC 300

    • OMTI 506

    or

  • other identification markings relating to electronic control circuits complying with the abovementioned description

ex 8542.11.91

Control circuit of bipolar technology in the form of a monolithic integrated circuit for the control of dynamic random-access memories (D-RAMs), capable of multiplexing addresses and generating timing, contained in a housing the exterior dimensions of which do not exceed 17×62 mm, with not more than 48 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • DP 8408

    • DP 8409

    • MB 1422

    • SN 74 S 409

    or

  • other identification markings relating to electronic control circuits complying with the abovementioned description

ex 8542.11.91

Dynamic random access memory controller of N-MOS (including H-MOS) technology (N-MOS D-RAM controller) capable of multiplexing addresses and generating timing, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×62 mm, with not more than 48 connecting pins or 52 contact areas, and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • C 8208

    • THCT 4502

    or

  • other identification markings relating to N-MOS D-RAM controllers complying with the abovementioned description

ex 8542.11.91

Memory controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing whose dimensions do not exceed 36×36 mm, with not more than 132 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • MC 68851

    or

  • other identification markings relating to controllers complying with the abovementioned description

ex 8542.11.91

Memory management unit of N-MOS (including H-MOS) technology (N-MOS MMU) with a maximum addressing capacity of 4 G bytes, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 36×82 mm, with not more than 125 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • 68451,

    • TX 32082 W

    • NS 32082

    • NS 32382

    or

  • other identification markings relating to N-MOS MMUs complying with the abovementioned description

ex 8542.11.91

Sequence control circuit of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of one 32 bit register, three 16 bit registers, one 16×16 bit service memory, one 7×17 bit last-in-first-out (LIFO) memory, one adder circuit, decodifying logic, priority logic, error detection and management logic, one 16 bit multiplexer, one 8 bit counter and a timing network, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connecting pins and bearing:

  • the identification marking:

    • CSS 0484

    or

  • other identification markings relating to sequence control circuits complying with the abovementioned description

ex 8542.11.91

Input-output circuit of N-MOS (including H-MOS) technology for data control equipped with a timing control with a static random access memory (S-RAM) with a capacity of 128×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or letters and figures:

    • 6532

    • CO 10750

    or

  • other identification markings relating to input-output control circuits complying with the abovementioned description

ex 8542.11.91

Sequential data control circuit of MOS technology for interface between a hard disc memory unit and the memory control unit in the form of a monolithic integrated circuit of MOS technology contained in a housing whose exterior dimensions do not exceed 28×54 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AIC 010

    • AIC 100

    • OMTI 505

    or

  • other identification markings relating to sequential circuits complying with the abovementioned description

ex 8542.11.91

Control circuit of C-MOS technology for the control of S/RAMs, capable of multiplexing addresses and generating pulses, and for the sequential control of data for the peripheral magnetic unit/rigid disk interface, and memory control, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of letters and figures:

    • OMTI 5055 (20513)

    or

  • other identification markings relating to control circuits complying with the abovementioned description

ex 8542.11.91

Status and shift control unit of bipolar technology in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×57 mm with not more than 42 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AM 2904

    or

  • other identification markings relating to status and shift control units complying with the abovementioned description

ex 8542.11.91

Circuit of advanced low power Schottky (ALPS) technology for the asynchronous control of signal lines (bus) and the conversion of a local bus into a multiplexed bus (BAM) in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 37×13 mm, with not more than 28 connecting pins and bearing:

  • an identification marking:

    • 68452

    or

  • other identification markings relating to ALPS BAMs complying with the abovementioned description

ex 8542.11.91

Contention resolving a local area network (LAN) controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×63 mm, with not more than 84 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • 8001

    • MCM 68590

    • 8003

    • WD 2840

    • 82586

    • WD 80 C 24

    • 82588

    • WD 83 C 503

    • AM 7990

    • WD 83 C 510

    • COM 9026

    • WD 83 C 603

    • DP 8390

    • WD 83 C 690

    or

  • other identification markings relating to contention resolving local area network controllers complying with the abovementioned description

ex 8542.11.91

Enhanced programmable communications interface (EPCI), in the form of monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 2661

    or

  • other identification markings relating to EPCIs complying with the abovementioned description

ex 8542.11.91

Serial communication controllers of C-MOS technology, with two independent duplex channels with a capacity of 2 Mbits/sec, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53×18 mm, with not more than 44 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • Z 80 C 30

    • Z 85 C 30

    • Z 85 C 35

  • other identification markings relating to controllers complying with the abovementioned description

ex 8542.11.91

Display controller and character generator (DCCG) for liquid crystal dot matrix display system in the form of a monolithic integrated circuit of C-MOS technology, contained in a housing the exterior dimensions of which do not exceed 20×26 mm, with not more than 60 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • HD 61830

    or

  • other identification markings relating to C-MOS Display Controller and character generators complying with the abovementioned description

ex 8542.11.91

Interpolation pulse generator of C-MOS technology for controlling geometrical functions, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • KM 3701

    or

  • other identification markings relating to interpolation modules complying with the abovementioned description

ex 8542.11.91

Video control circuit for graphics and memory (video controller), in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 15×52 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 38301-A

    • L IA 2099 PVC-2

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.11.91

Monochrome display controller (MDC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 01-01.00 551 A

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.91

Cathode-ray tube controller (CRTC) of C-MOS technology in the form of a monolithic integrated circuit, contained in a housing whose dimensions do not exceed 32×62 mm, with not more than 84 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 82 C 434

    or

  • other identification markings relating to controllers complying with the abovementioned description

ex 8542.11.91

Control circuit for cathode-ray tubes or liquid crystal displays (CRT and LCD controller) of C.MOS technology, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 30×30 mm, with not more than 84 connecting pins or contact areas, and bearing:

  • an identification marking consisting of or including the following combination of letters and figures:

    • V 6355-DJ

    or

  • other identification markings relating to electronic control circuits complying with the abovementioned description

ex 8542.11.91

Cathode-ray tube controller (CRTC) of bipolar technology in the form of a monolithic integrated circuit contained in a housing whose exterior dimensions do not exceed 15×55 mm with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • SCB 2675

    or

  • other identification markings relating to CRTCs complying with the abovementioned description

ex 8542.11.91

Graphics controller of C-MOS technology in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • PEGA

    • 82 C 431

    or

  • other identification markings relating to graphics controllers complying with the abovementioned description

ex 8542.11.91

Graphic display controller (GDC), of N-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 52×18 mm, with not more than 44 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • Z 7220 A

    or

  • other identification markings relating to GDCs complying with the abovementioned description

ex 8542.11.91

Colour selection controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 19×52 mm, with not more than 44 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 82 C 433

    or

  • other identification markings relating to controllers complying with the abovementioned description

ex 8542.11.91

Analogue-digital monolithic circuit, capable of controlling spindle motors and keeping their speed constant, contained in a housing whose exterior dimensions do not exceed 9×25 mm, with not more than 20 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • MGA 3015 A

    • UC 1633

    • UC 1634

    • UC 3633

    • UC 3634

    or

  • other identification markings relating to analogue-digital integrated circuits complying with the abovementioned description

ex 8542.11.91

Analogue-digital monolithic integrated circuit of bipolar technology, for damping the oscillations of stepping motors during the positioning phase, contained in a housing whose exterior dimensions do not exceed 18×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of letters:

    • STEDA

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.91

Controller for servo-devices of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • KM 3702

    or

  • other identification markings relating to controllers complying with abovementioned description

ex 8542.11.91

Eight-Channel control circuit for maintaining a constant electromagnetic traction force with incorporated diodes and a storage capacity of eight bits, in the form of a monolithic integrated circuit, of C-MOS technology contained in a housing the exterior dimensions of which do not exceed 9×28 mm, with not more than 22 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • UCN 5801

    or

  • other identification markings relating to control circuits complying with the abovementioned description

ex 8542.11.91

Four-Channel control circuit for maintaining a constant electromagnetic traction force with incorporated diodes and a storage capacity of four bits, in the form of a monolithic integrated circuit of C-MOS technology, contained in a housing the exterior dimensions of which do not exceed 7×22 mm, with not more than 16 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • UCN 5813

    or

  • other identification markings relating to control circuits complying with the abovementioned description

ex 8542.11.91

Control circuit of TTL technology in the form of a monolithic integrated circuit for the firing of magnetic print hammers, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 801379-002

    • 810751-001

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.91

8-bit-(octal) dynamic memory bipolar driver in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 20 connecting pins and bearing.

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AM 2965

    • AM 2966

    or

  • other identification markings relating to dynamic memory bipolar drivers complying with the abovementioned description

ex 8542.11.91

Parallel communications interface of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 64×64 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figure and letters:

    • PPC-1

    or

  • other identification markings relating to electronic control circuits complying with the abovementioned description

ex 8542.11.91

Subscriber line interface circuit (SLIC) with a high voltage rating of not less than 200 V, with direct internal relay drive, in the form of a monolothic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • HC 5504

    or

  • other identification markings relating to SLICS complying with the abovementioned description

ex 8542.11.91

Control circuit for data block transfer between dynamic memory and peripherals (DMA Transfer Controller or ,,DTC"), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×16 mm, with not more than 48 connecting pins, and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • Z 8516

    • Z 9516

    or

  • other identification markings relating to DTCs complying with the abovementioned description

ex 8542.11.91

Serial interface, capable of implementing the data stream encoding, decoding and associated control functions for a local area network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • 8002

    • 8023

    • 82501

    • AM 7991

    • COM 9032

    or

  • other identification markings relating to serial interface devices complying with the abovementioned description

ex 8542.11.91

Station digital interface circuit for parallel/serial or serial/parallel conversion of digital signals in telephone sets, of C-MOS technology (C-MOS STID), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins, and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • WCC 295 G

    or

  • other identification markings relating to station interface digital circuits complying with the abovementioned description

ex 8542.11.91

Bus interface circuit of bipolar technology with 8, 9 or 10-bit registers, in the form of monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×34 mm, with not more than 24 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AM 29821

    • AM 29822

    • AM 29823

    • AM 29824

    • AM 29825

    • AM 29826

    • AM 29843

    • AM 29844

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Multiple bus interface circuit (Multiple Bus Buffer) of low power Schottky technology for interfacing the error correction and detection unit system data bus and dynamic random access memory (D-RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×33 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AM 2961

    or

  • other identification markings relating to error correction multiple bus buffers complying with the abovementioned description

ex 8542.11.91

Bus interface circuit of ALPS technology, in the form of a monolithic integrated circuit, for the management of address signals, contained in a housing the external dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 82 A 203

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Bus interface circuit of ALPS technology, in the form of a monolithic integrated circuit, for the management of data flow in the signal lines of the CPU, contained in a housing the external dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 82 A 205

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Bus interface circuit in C-MOS technology, in the form of a monolithic integrated circuit, for the control of communication lines comprising a numerical bus, two independent receivers and a transmitter consisting of a first-in first-out (FIFO) memory, contained in a housing whose exterior dimensions do not exceed 20×52 mm, with not more than 44 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • HS 3282

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Bus interface circuit of C-MOS technology, in the form of a monolithic integrated circuit, for the management of address signals, comprising a circuit with 4×2-input AND gates, 2 buffer circuits, 2 latch circuits, 4 independent transceivers, a 256×4 bit PROM, contained in a housing the external dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • FE 3020

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Bus interface circuit C-MOS technology, in the form of a monolithic integrated circuit, for the management of I/0 data flow in signal lines, with 4 independent transceivers, a circuit with 4×2-input NAND gates, a circuit with 4×2-input AND gates, a separator circuit, a flip-flop circuit, contained in a housing the external dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • FE 3030

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Interface circuit for the synchronization of data flow from a hard disc drive, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×35 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • DP 8462

    or

  • other identification markings relating to interfaces complying with the abovementioned description

ex 8542.11.91

Analogue-digital monolithic integrated circuit of bipolar technology for interface signals between the peripheral hard-disc, memory unit and the central unit, contained in a housing the external dimensions of which do not exceed 15×50 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AD 581 C

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.91

Interface circuit of C-MOS technology for signals between peripheral hard disc memory units and central units, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 28×53 mm, with not more than 80 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • OMTI 5080

    • (OMTI 20508)

    • OMTI 5090

    • (OMTI 20509)

    • WD 11 C 00

    or

  • other identification markings relating to bus interface circuits complying with the abovementioned description

ex 8542.11.91

Encoder/decoder serial interface circuit for hard disc drives, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 17×37 mm, with not more than 28 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AIC 250

    • AIC 270

    • OMTI 5027

    • OMTI 507

    or

  • other identification markings relating to interface complying with the abovementioned description

ex 8542.11.99

Computing unit for the multiplication or processing of fixed and floating point numbers, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 42×42 mm, with not more than 144 connecting pins and bearing:

  • an identification consisting of or including one of the following combinations of figures and letters:

    • ADSP 3210, ADSP 3220

    or

  • other identification markings relating to computing units complying with the abovementioned description

ex 8542.11.99

8×8 bit multiplier accumulator (MAC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×16 mm, with not more than 48 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of numbers and letters:

    • ADSP-1008 A

    or

  • other identification markings relating to MACs complying with the abovementioned description

ex 8542.11.99

Floppy-disc data separator (FDDS), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 27×8 mm, with not more than 20 connecting pins and bearing:

  • an identification marking consisting of or including the following combinations of figures and letters:

    • FDC 9216

    • FDC 9216-B

    • FDC 9229 T

    • FDC 9229 BT

    • WD 9216-00

    • WD 92 C 32

    or

  • other identification markings relating to FDDS, complying with the abovementioned description

ex 8542.11.99

Hard Disc Data Separator (HDDS) in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×37 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and lettes:

    • DP 8460-2

    • DP 8460-3

    • DP 8460-4

    • DP 8465

    • HDC 9226

    • WD 10 C 20

    • WD 10 C 21

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.11.99

Six-or eight-channel monolithic integrated circuit for the generation of read/write signals for hard disc drivers, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • SSI 117

    • SSI 501

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.99

Dual universal asynchronous receiver/transmitter (DUART) of MOS-technology, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×53 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • MC 2681

    • SCN 2681

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.99

Programmable asynchronous communication element circuit N-MOS technology, for the asynchronous transmission and reception of data, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×54 mm, with not more than 44 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • INS 8250

    • INS 82 C 50

    • NS 16450

    • NS 16550

    • NS 16 C 450

    • WD 8250

    or

  • other identification markings relating to ACE circuits complying with the abovementioned description

ex 8542.11.99

Monolithic integrated circuit in N-MOS technology (including H-MOS) for the display of graphic symbols on a cathode-ray-tube operating in stroke mode, contained in a housing whose exterior dimensions do not exceed 28×61 mm, with not more than 68 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • FCD 96 114 898

    • FCD 96 114 899

    • FCD 96 149 135

    • FCD 28 042 277

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.99

Sequential control and generating circuit of CMOS technology for the memory display, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×52 mm, with not more than 44 connecting pins or contact surfaces and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 82 C 432

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.99

Demodulator/tone decoder of bipolar technology for frequency decoding, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 14 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • XR 2211

    or

  • other identification markings relating to demodulator tone decoders complying with the abovementioned description

ex 8542.11.99

Encoder/decoder circuit using Manchester code (MED) for the transmission of data in continuous flux with a repeater mode in C-MOS technology, having an output voltage of 4,5 volts, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 20 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • HD 6409

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.11.99

Analogue-digital signal converter, containing amplifiers, D/A and A/D converters with a supply voltage of 12 V±10% and a digital serial interface with asynchronous receiver/transmitter, in the form of a monolithic integrated circuit, contained in a housing whose external dimensions do not exceed 18×18 mm, with not more than 44 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AD 75002

    or

  • other identification markings relating to programmable amplifiers with asynchronous receiver/transmitter complying with the abovementioned description

ex 8542.11.99

Analogue to digital converter for the calculation of the average value of variable wave-forms, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×10 mm, with not more than 14 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AD 536 A

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.99

12-bit-analogue to digital converter, in the form of a monolithic integrated circuit incorporating a voltage reference and clock, contained in a housing the external dimensions of which do not exceed 36×15 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AD 574 A

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.11.99

C-MOS clock circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 16 connecting pins, and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • HI 2060

    • HI 2065

    • MSM 5537

    • T 3605

    or

  • other identification markings relating to clock circuits complying with the abovementioned description for the production of automatic time-switches, instrument panel clock and clocks of a similar type for motor vehicles(8)

ex 8542.11.99

C-MOS clock circuit, operating from a single 1,5 V power supply, with a liquid crystal display (LCD) driver, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×21 mm, with not more than 56 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • TC 8219 AF

    or

  • other identification markings relating to C-MOS clock circuits complying with abovementioned description

ex 8542.11.99

C-MOS clock/calendar circuit, incorporating a quartz crystal oscillator, independent timer recorders and a timer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7×20 mm, with not more than 16 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • MM 581 74 A

    • 58274

    or

  • other identification markings relating to clock/calendar circuits complying with the abovementioned description

ex 8542.11.99

C-MOS clock circuit with audio and hour-count output, in the form of a monolithic integrated circuit, contained in a housing whose dimensions do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures or figures and letters:

    • SVM 5530

    • 7910

    or

  • other identification markings relating to clock/calendar circuits complying with the abovementioned description

ex 8542.11.99

MOS programmable interval timer (MOS PIT), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 8253

    • 8254

    • 82 C 54

    or

  • other identification markings relating to MOS PITs complying with the abovementioned description

ex 8542.11.99

Function generator of bipolar technology for the generation of variable waveforms, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • XR 2206

    • XR 8038

    or

  • other identification markings relating to function generators complying with the abovementioned description

ex 8542.11.99

Digital signal synthesizer of C-MOS technology with one frequency generator producing one signal and able to output one sound, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×25 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • UMC 3511 A

    or

  • other identification markings relating to digital signal synthesizers (DSS) complying with the abovementioned description

ex 8542.11.99

Programmable digital signal synthesizer of C-MOS technology with 13 frequency generators each producing up to five sounds and an output capacity of up to 65 sounds, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×50 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • DPS 6401

    or

  • other identification markings relating to digital signal synthesizers complying with the abovementioned description

ex 8542.11.99

Programmable digital signal synthesizer of C-MOS technology with 32 frequency generators to generate eight notes each and a simultaneous output of up to 160 notes, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of letters:

    • MEG

    or

  • other identification markings relating to digital synthesizers (DSS) complying with the abovementioned description

ex 8542.11.99

C-MOS-phoneme speech synthesizer, with a supply current of less than 10 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • CD 54121 N2L

    • CM 54104

    • SC 01

    • CD 54122 N2L

    • CM 54145 N2L

    • SSI 263

    • CD 54123 N2L

    • CM 54146 N2L

    • CD 54147 N2L

    • CM 54166 N2L

    or

  • other identification markings relating to phoneme speech synthesizers complying with the abovementioned description

ex 8542.11.99

Amplifier, of bipolar technology for the amplification of either read or write signals of floppy discs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×29 mm, with not more than 22 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • XR 2247

    • XR 3470

    or

  • other identification markings relating to amplifiers complying with the abovementioned description

ex 8542.11.99

Six-Channel monolithic integrated circuit (Read/Write data processor circuit) for the amplification and conversion of read signals and conversion of write signals for hard disc drives, contained in a housing the exterior dimensions of which do not exceed 19×38 mm, with not more than 28 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including one of the following combinations of letters and figures:

    • SSI 540

    • SSI 541

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.11.99

Repeater circuit, of bipolar technology for the regeneration of pulse code-modulated signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • XR C 240

    or

  • other identification markings relating to repeater circuits complying with the abovementioned description

ex 8542.11.99

Smoke detector operating in a temperature range between at least −20°C to 50°C, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×9 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • CS 235

    • V 24216

    or

  • other identification markings relating to smoke detectors complying with the abovementioned description

ex 8542.19.20

Amplifier, in the form of a monolithic integrated analog circuit the exterior dimensions of which do not exceed 3×3 mm for use in the manufacture of products falling within subheading 9021 40 00(9)

ex 8542.19.30

Amplifier, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 2×4×4 mm, with not more than 10 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • C 05

    • V 35

    or

  • other identification markings relating to amplifiers complying with the abovementioned description for the manufacture of products falling within subheading 9021 40 00(9)

ex 8542.19.30

Electronically adjustable differential amplifiers for at least the full range of signals from 0 to not less than 400 MHz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×11 mm, with not more than 16 connecting pins, and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 0078-10

    or

  • other identification markings relating to amplifiers complying with the abovementioned description

ex 8542.19.30

Amplifier for a full range of signals from 0 to 60 KHz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 6×13×26 mm, with not more than 18 connecting pins and a leakage of not more than 0.3 μA and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • ISO 100

    or

  • other identification markings relating to amplifiers complying with the abovementioned description, for use in the manufacture of telephone exchanges(9)

ex 8542.19.30

Read/write amplifier for thin film magnetic heads, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm, with not more than 24 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • VM 114

    or

  • other identification markings relating to amplifiers complying with the abovementioned description

ex 8542.19.30

Winchester disc drive amplifier for magnetic heads, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7×7 mm, with not more than 10 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • A 2480 FC

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.19.30

Amplifier with a programmable gain factor in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 30×45 mm, with not more than 32 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 3606 G

    or

  • other identification markings relating to amplifiers complying with the abovementioned description

ex 8542.19.30

Thermocouple amplifier for instrumentation control at temperatures from 0° to 50°C, incorporating an alarm system, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 20×8 mm, with not more than 14 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AD594

    • AD595

    or

  • other identification markings relating to thermocouple amplifiers complying with the abovementioned description

ex 8542.19.90

Monolithic integrated analogue circuit of bipolar technology for the overload protection of telephone exchanges, contained in a housing the exterior dimensions of which do not exceed 11×10 mm, with not more than 3 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 1515

    or

  • other identification markings relating to monolithic integrated circuits complying with the abovementioned description

ex 8542.19.90

Frequency generator in the form of an analogue monolithic integrated circuit of bipolar technology, with an operating voltage of not less than 40 and not more than 130 V AC, which generate signals oscillating between 512 Hz (±22%) and 640 Hz (±22%) at a 10 Hz rate, contained in a housing the external dimensions of which do not exceed 9×11 mm, with not more than 8 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • QMV 155

    or

  • other identification markings relating to integrated circuits complying with the abovementioned description

ex 8542.19.90

Monolithic integrated analogue circuit for the reduction of audio noise by 14 dB, contained in a housing the exterior dimensions of which do not exceed 26×7 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • HA 12043

    or

  • other identification markings relating to analogue circuits complying with the abovementioned description

ex 8542.19.90

Premagnetization control circuit for audio frequency magnetic tapes, of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×8 mm, with not more than 18 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • PC 1297 CA

    or

  • other identification markings relating to monolithic integrated circuits complying with the abovementioned description

ex 8542.19.90

Temperature transducer in the form of a monolithic analogue integrated circuit, contained in a housing the exterior dimensions of which do not exceed 6×4 mm, with not more than three connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AD 590

    or

  • other identification markings relating to transducers complying with the abovementioned description

ex 8542.19.90

Monolithic integrated analogue circuit of C-MOS technology for controlling the speed of linear or rotary motors and the positioning of magnetic heads, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • A 2460

    • A 2461

    or

  • other identification markings relating to integrated analog circuits complying with the abovementioned description

ex 8542.19.90

Monolithic integrated analogue circuit of bipolar technology for driving linear motors or motors with rotating arms, working at 20 V/2,5 A maximum, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • EL 2007

    • EL 2017

    or

  • other identification markings relating to integrated analogue circuits complying with the abovementioned description

ex 8542.19.90

Phase-locked loop (PLL) frequency synthesizer of N-MOS (including H-MOS) technology for the AM and FM frequency ranges, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 25×7 mm, with not more than 20 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • LM 7000

    or

  • other identification markings relating to circuits complying with the abovementioned description

ex 8542.20.00

32-bit microprocessor in C-MOS technology, in the form of a hybrid integrated circuit, consisting of a single substrate layer on which are mounted two chips, comprising a central processing unit (CPU) and a memory unit, the exterior dimensions of which do not exceed 33×76 mm, with not more than 60 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 57-00000, 57-19400

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.20.00

Video digital to analogue converter (VDAC) with a maximum conversion time of 10 nanoseconds, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×35 mm, with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • VDAC 0405 H

    • VDAC 0605 H

    • VDAC 0805 H

    or

  • other identification markings relating to VDACs complying with the abovementioned description

ex 8542.20.00

Four-channel digital-to-analogue converter, each channel having a capacity of 12 bits, in the form of a hybrid integrated circuit, contained in a housing the external dimensions of which do not exceed 41×21 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • AD 390

    or

  • other identification markings relating to converters complying with the abovementioned description

ex 8542.20.00

Amplifier in the form of a hybrid integrated circuit for the frequency range 20 Hz to 20 000 Hz, contained in a housing the exterior dimensions of which do not exceed 45×80 mm, with not more than 30 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • STK 4041

    • STK 4151

    • STK 4201

    or

  • other identification markings relating to hybrid circuits complying with the abovementioned description

ex 8542.20.00

Subscriber-connection units (crosspoint switch) with not less than four and not more than 12 switches and an operating voltage of at least 150 V, in the form of a hydrid integrated circuit, contained in a housing whose dimensions do not exceed 92×41 mm, with not more than 94 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures:

    • 904

    • 719

    or

  • other identification markings relating to a crosspoint switch complying with the abovementioned description

ex 8542.20.00

Infrared receiver with a carrier frequency of not less than 36 kHz and not more than 40 kHz, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×15 mm, with not more than 5 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters

    • BX 1317

    • BX 1323

    • BX 1387

    • BX 1407

    or

  • other identification markings relating to devices complying with the abovementioned description

ex 8542.20.00

Filters operating in the frequency ranges between 5 and 11 kHz or 2,2 and 2,5 mHz, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×17 mm, with not more than 4 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • SLC 2570

    or

  • other identification markings relating to filters complying with the abovementioned description

ex 8542.20.00

Opto-electronic receiving device (PINFET receiver) with a wavelength range 1 300-1 600 nanometres, and a speed of not less than 678 megabits per second, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×13×13 mm, with not more than 16 connecting pins, with an attached optical fibre lead (pig-tail), and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • 416/7/970 30

    • QDFI-XXXX-001

    or

  • other identification markings relating to devices complying with the abovementioned description

9002.11.00

Adjustable lens unit, having a focal length of between 115 mm and 140 mm, a diameter of not less than 120 mm and not more than 130 mm, and comprising a combination of between four and eight glass or methacrylic lenses, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1) ... ... ... ...

Article 6

SCHEDULE 4PARTIAL EXEMPTIONS FROM CUSTOMS DUTIES

Combined nomenclature codeDescription of GoodsRates of duty
(1)(2)(3)
as from 10.8.88as from 1.1.89as from 1.1.90as from 1.1.91as from 1.1.92as from 1.1.93as from 1.1.94as from 1.1.95
ex 0302.65.10 and ex 0303.75.10

Piked dogfish (Squalus acanthias), fresh, chilled or frozen, whole, headless or in pieces.

3.732.20
ex 0306.13.90

Shrimps of the species "Royal Red" (Haliporoides sibogae or Hymenopenaeus sibogae) peeled and deep-frozen, intended for the processing industry for the manufacture of products falling within heading No 1605 (1)

5.64.53.32.20
ex 0904.20.10

Sweet red or green peppers, in pieces, with a moisture content not exceeding 9.5%

6.253.72.50
ex 1507.90.10

Purified soya-bean oil in glass bottles. Each bottle holds 10 litres of purified soya bean oil containing by weight:

  • a minimum of 8.5% and a maximum of 12% of palmitic acid esters,

  • a minimum of 2.5% and a maximum of 4.7% of stearic acid esters,

  • a minimum of 22.4% and a maximum of 29% of oleic acid esters,

  • a minimum of 46.6% and a maximum of 53.7% of linoleic acid esters,

  • a minimum of 7.4 % and a maximum of 11% of linolenic acid esters,

and containing:

  • not more than 5 millimoles of free fatty acid per kilogram of oil,

  • phosphalipids corresponding to a nitrogen content not exceeding 0.04 mg per gram of oil.

The soya-bean oil covered by this description is destined for the preparation of emulsions for injections (1)

8 with a maximum duty of 125 ECU per 100 kg8 with a maximum duty of 125 ECU per 100 kg8 with a maximum duty of 125 ECU per 100 kg6.6 with a maximum duty of 104.1 ECU per 100 kg5.3 with a maximum duty of 83.2 ECU per 100 kg3.9 with a maximum duty of 62.3 ECU per 100 kg2.6 with a maximum duty of 41.5 ECU per 100 kg1.3 with a maximum duty of 20.6 ECU per 100 kg
ex 1605.20.00

Shrimps and prawns of the species Pandalus borealis boiled in water and shelled, whether or not frozen or dried, intended for the industrial processing of products falling within heading No 1605 (1)

5.44.23.12.10
ex 1605.30.00

Lobster flesh, cooked, to be used by the processing industry for the manufacture of butters based on lobster, pastes, pâtés, soups or sauces (1) (2)

3.12.50
ex 2926.90.90

Isophthalonitrile

2.20
ex 2933.51.10

Phenobarbital (INN) and its salts

2.70
ex 3906.90.00

Polymerization products of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (a)

2.20
ex 8541.40.10 and ex 8542.20.00

Digital display of a size not exceeding 25×35 mm, consisting of a printed circuit board on which are mounted, under a plastic cover, up to 22 light-emitting diodes manufactured from gallium-based semiconductor compounds. Each display consists of a single character with or without a plus or minus sign and/or one or two dots

2.60
ex 8542.11.71

Static, random-access memory of C-MOS technology (C-MOS S-RAM) with a storage capacity of 2 K×8 bits and with a nominal standby power of 0,005 milliwatts at 25°C in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters

    • TC5516APL-2

    • TC5517CPL-15

    • TC5516AFL-2

    • TC5517CPL-20

    • TC5516APL

    • TC5517CFL-15

    • TC65516AFL

    • TC5517CFL-20

    • TC5517BPL-20

    • TC5517BPL-25

    • TC5517BFL-20

    • TC65517BFL-25

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

2.60
ex 8542.11.71

Non-volatile memory in the form of a monolithic integrated circuit, consisting of a C-MOS S-RAM, with a capacity of 16 Kbits and internal power supply, contained in a housing the exterior dimensions of which do not exceed 19×36 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • DS 1220 Y

    • MK 48 Z 02 (B)

    or

  • other identification markings relating to non-volatile memories complying with the abovementioned description

2.60
ex 8542.11.71

Static, random-access memory of C-MOS technology (C-MOS S-RAM) with a storage capacity of 2 K×8 bits and with a nominal standby power of 0,005 milliwatts at 25°C in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm with not more than 24 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • TC5516APL-2

    • TC5517CPL-15

    • TC5516AFL-2

    • TC5517CPL-20

    • TC5516APL

    • TC5517CFL-15

    • TC65516AFL

    • TC5517CFL-20

    • TC5517BPL-20

    • TC5517BPL-25

    • TC5517BFL-20

    • TC65517BFL-25

    or

  • other identification markings relating to C-MOS S-RAMs complying with the abovementioned description

2.60
ex 8542.11.71

Dynamic, random-access read/write memory of N-MOS (including H-MOS) technology, (N-MOS D-RAMs) with a storage capacity of 64 K×4 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×34 mm, with not more than 20 connecting pins arranged in two parallel lines (dual-in-line package) and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • HM 50464

    • PD 41464

    • MSM 4464

    • TMM 41464

    • MB 81464

    • TMS 4464

    • PD 41254

    or

  • other identification markings relating to N-MOS D-RAMs complying with the abovementioned description

3.72.82.10
ex 8542.11.71

Dynamic random-access memories (D-RAMs), of N-MOS (including H-MOS) technology with a storage capacity of 256 K bits and access times not exceeding 150 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of a which do not exceed 12×22 mm, with not more than 20 connecting pins with zig-zag in-line package and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • HM 50256 ZP

    • MB 81256 P

    • PD 41256 V

    or

  • other identification markings relating to components complying with the abovementioned description

3.72.82.10
ex 8542.11.71

Read-only memory in C-MOS technology (C-MOS ROM) with a storage capacity of 256 K bits and a standby current of not more than 0,03 mA, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×50 mm, with not more than 54 connecting pins and bearing:

  • an indentification marking consisting of or including one of the following combinations of figures and letters:

    • HN 61256

    • HN 613256

    • MB 83256

    or

  • other identification markings relating to C-MOS ROMs complying with the abovementioned description

2.60
ex 8542.11.71

Read-only memory of C-MOS technology (C-MOS ROM) with a storage capacity of one megabit in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • HN 62301 P

    • MB 83 1000

    • MB 831124

    • TC 53 1000 P

    or

  • other identification markings relating to C-MOS ROMs complying with the abovementioned description

2.60
ex 8542.11.75

Single-chip 8-bit microcomputer of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit incorporating 16-bit arithmetic/logic unit (ALU), 4 K bits ROM, 2 K bits RAM, contained in a housing the external dimensions of which do not exceed 42×17 mm with not more than 64 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • PD 7811 G

    or

  • other identification markings relating to microcomputers complying with the abovementioned description

3.72.82.10
ex 8542.11.75

8-bit microprocessor of N-MOS (including H-MOS) technology with 16 bit internal architecture, in the form of a monolithic integrated circuit consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and peripheral chip select, a programmable wait state generator and a local bus controller, contained in a housing the dimensions of which do not exceed 30×30 mm with not more than 68 connecting pins or contact areas, and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 80188

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

2.60
ex 8542.11.75

16-bit microprocessor of N-MOS technology (including H-MOS) in the form of a monolithic integrated circuit, consisting of a central processing unit (CPU), a memory management and protection unit (MMU) and a real address and virtual address operating mode system (OSO), contained in a housing whose exterior dimensions do not exceed 30×30 mm, with not more than 68 connecting pins or contact areas and bearing:

  • and identification marking consisting of or including the following combination of figures:

    • 80286

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

3.72.82.10
ex 8542.11.75

Graphics co-processor of C-MOS technology comprising an advanced DRAM controller for graphics memory, shift registers and DMA channel, up to 256 simultaneous colours, multi-tasking support, integral sequential DRAM/access DRAMs, contained in a housing the exterior dimensions of which do not exceed 37×37 mm, with not more than 88 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures:

    • 82786

    or

  • other identification markings relating to graphics co-processors complying with the abovementioned description

2.60
ex 8542.11.91

Semi-custom logic array (gate array) of C-MOS technology with metal gates, in the form of a monolithic integrated circuit with an operating voltage of 12 volts, with not less than 637 two-input functions, having within the array a digital code produced by an electron beam, contained in a housing whose exterior dimensions do not exceed 29×11 mm, with not more than 22 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • FB 215

    or

  • other identification markings relating to gate arrays complying with the abovementioned description

2.60
ex 8542.11.91

Gate arrays of C-MOS technology in the form of a monolithic integrated circuit containing not less than 100 K transistors and not more than 500,000 transistors, contained in a housing the exterior dimensions of which do not exceed 50×50 mm, with not more than 299 connecting pins and bearing:

  • an identification consisting of or including one of the following combinations of figures and letters:

    • LCA 10026

    • LCA 10075

    • LCA 10038

    • LCA 10100

    • LCA 10051

    • LCA 10129

    or

  • other identification markings relating to microprocessors complying with the abovementioned description

2.60
ex 8542.11.91

Floppy disc controller of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of letters and figures:

    • FE 2100

    • G 70360-33

    • L 1 A 0519

    • MB 89311

    • WD 16 C 92

    • WD 37 C 65

    or

  • other identification markings relating to adaptor circuits complying with the abovementioned description

2.60
ex 8542.11.91

Cathode-ray tube controller (CRTC) of N-MOS (including H-MOS) technology in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 62×25 mm, with not more than 68 connecting pins and bearing:

  • an identification marking either consisting of or including one of the following combinations of figures and letters:

    • AM 8052

    • D 8275 H

    • HD 6845

    • HD 68 A 45

    • P 8275 H

    or

  • other identification markings relating to CRTCs complying with the abovementioned description

2.60
ex 8542.11.91

Programmable advanced video display controller (AVDGs) of N-MOS (including H-MOS) technology in the form of a monolithic integrated circuit, contained in a housing whose external dimensions do not exceed 15×55 mm, with not more than 40 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • SCN 2674

    or

  • other identification markings relating to controllers complying with the abovementioned description

2.60
ex 8542.11.91

Programmable communication interface of N-MOS (including H-MOS) technology (N-MOS PCIs), in the form of amonolithic integrated circuit, containedin a housing the exterior dimensions ofwhich do not exceed 17×39 mm, withnot more than 28 connecting pins andbearing:

  • an identification marking consistingof or including the following combiation of figures and letters:

    • 8251 A

    or

  • other identification markings relatingto N-MOS PCIs complying with theabovementioned description

2.60
ex 8542.11.91

Monolithic integrated circuit with at least 16 analogue switching elements, of C-MOS technology, for controlling low frequency signals in the range of 20 Hz to 20,000 Hz, capable of dealing with signals up to 3 V with a distortion of not more than 0.05% over the whole frequency range at a voltage of 1 V, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 42 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • TC 9164 N

    • TC 9177 P

    • TC 9184 P

    or

  • other identification markings relating to monolithic integrated circuits complying with the abovementioned description

2.60
ex 8542.11.99

Universal synchronous/asynchronous receiver/transmitter (USART) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • MSM 82 C 51

    or

  • other identification markings relating to universal synchronous/asynchronous receiver/transmitters complying with the abovementioned description

2.60
ex 8542.11.99

Pulse code modulation (PCM) codec of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of a sample and hold circuit digital-to-analogue converter, comparator, successive approximation register and logic function to interface to a fall duplex PCM link, contained in a housing whose exterior dimensions do not exceed 11×29 mm, with not more than 22 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • 2911 A-1

    or

  • other identification markings relating to PCM codecs complying with the abovementioned description

2.60
ex 8542.11.99

Subscriber line audio-processing circuit (SLAC) with two digital signal processors, an anlogue-digital converter and a digital-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

  • an identification marking consisting of or including one of the following combinations of figures and letters:

    • AM 7901

    • AM 7905

    or

  • other identification markings relating to SLACs complying with the abovementioned description

2.60
ex 8542.11.99

Pulse code modulation (PCM) transmit/receive filter of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of two filters of a PCM line or trunk termination, contained in a housing whose exterior dimensions do not exceed 10×21 mm, with not more than 16 connecting pins and bearing:

  • an identification marking consisting of or including the following combination of figures and letters:

    • D 2912 A

    or

  • other identification markings relating to PCM filters complying with the abovementioned description

2.60

Explanatory Note

(This note is not part of the Order)

This Order implements obligations of the United Kingdom concerning Spain under the Treaty of Accession of Spain and Portugal to the European Communities from 10th August 1988 up to and including 31st December 1995. It provides for the reductions in the customs duties charged on the importation of goods into the United Kingdom from Spain which are to be made under the Act annexed to the Treaty from 10th August 1988 and from the beginning of each subsequent calendar year during the remainder of the transitional period, (see European Communities No. 27 and 28 (1985) Cmnd 9634 and 9635). Article 6 of the Customs Duties (Spain and Portugal) Order 1987 (S.I. 1987/2183) would be effective to implement the reduction in customs duties determined by Council Regulation (EEC) No. 839/88 (OJ No. L87, 31.3.1988, p. 1) from 1st July 1988 to the end of 1988 but as from 10th August 1988 this Order replaces as far as Spain is concerned the Customs Duties (Spain and Portugal) Order, (which is revoked by the Customs Duties (Spain and Portugal) (Revocation) Order 1988 (S.I. 1988/1259) in order to make known the actual rates of duty, which are shown in the Schedules to this Order.

Council Regulation (EEC) No. 839/88 totally suspends from 1st July 1988 certain customs duties applicable to imports from Spain.

Certain duties are charged by reference to a number of ECUs. The present rate of conversion for 1988 is 1 ECU equals £0.693890 (see Commission Notice of 1.10.1987, (OJ No. C262, 1.10.1987, p. 1)).

This Order also charges duties on products covered by the European Economic Community's common organisation of the market in beef and veal which are listed in Schedule 2 from 10th August 1988 until the end of the beef and veal marketing year which begins in 1992. The rate of duty chargeable is determined by reference to the beef and veal marketing year in force at the date of importation rather than the calendar year. The beef and veal marketing year is determined in accordance with article 4 of Council Regulation EEC No. 805/68, which provides that the marketing year shall begin on the first Monday in April of each year and end on the day preceding that day in the following year except where the Council decides otherwise. Thus the beef and veal marketing year for 1988/9 runs from 4th April 1988, until 2nd April 1989, unless the Council decides otherwise.

Goods in Schedule 3 are subject to a total exemption from customs duty and goods in Schedule 4 are subject to a partial exemption from customs duty instead of any higher rate which would otherwise apply under Schedule 1.

(1)

1972 c. 68; section 1(2) was amended by the European Communities (Spanish and Portuguese Accession) Act 1985 (c. 75) and section 5(3) by the Customs and Excise Duties (General Reliefs) Act 1979 (c. 3), section 19 and Schedule 2, paragraph 3.

(2)

OJ No. L148, 28.6.1968, OJ/SE (I) p. 187.

(3)

The Act is included in European Communities No. 27 (1985), Cmnd 9634, and the Decision is included in European Communities No. 28 (1985) Cmnd 9635.

(4)

See Council Regulation (EEC) 2658/87 (OJ No. L256, 7.9.1987, p. 1).

(5)

S.I. 1987/1538, amended by S.I. 1988/627.

(6)

OJ No. L379, 30.12.1978 p. 1.

(7)

See Council Regulation (EEC) No. 2779/78, (OJ No. L333, 30.11.1978, p. 5), amended by Council Regulation (EEC) No. 289/84, (OJ No. L33, 4.2.1984, p. 2).

(8)

Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.

(9)

Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.


BAILII: Copyright Policy | Disclaimers | Privacy Policy | Feedback | Donate to BAILII
URL: http://www.bailii.org/uk/legis/num_reg/1988/uksi_19881261_en.html