BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £5, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | ||
United Kingdom Statutory Instruments |
||
You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The School Crossing Patrol Sign (England and Wales) Regulations 2002 URL: http://www.bailii.org/uk/legis/num_reg/2002/20023020.html |
[New search] [Help]
Made | 5th December 2002 | ||
Laid before Parliament | 16th December 2002 | ||
Coming into force | 9th January 2003 |
Size, colour and type of patrol sign
3.
- (1) A patrol sign shall comprise a roundel and a pole on which the roundel is mounted.
(2) The roundel shall be not less than 450 nor more than 470 millimetres in diameter and each of its faces shall be of the colour and type shown in the Schedule to these Regulations.
(3) A protective strip, in these Regulations called a "perimeter strip", may be applied to the perimeter of the roundel in accordance with the requirements of paragraph (4).
(4) The requirements are that -
(5) If a patrol sign was first used before the coming into force of these Regulations with a perimeter strip applied to the roundel, that strip may be retained even if it does not comply with the requirements of paragraph (4).
(6) Paragraph (5) shall cease to have effect on 1st January 2004.
(7) The pole shall be coloured with alternating black and yellow bands of equal size and not less than 285 nor more than 315 millimetres deep and with a black band uppermost below the roundel.
Illumination
4.
- (1) The yellow bands on the pole may be illuminated by means of retroreflecting material.
(2) The parts of the roundel coloured black shall not be illuminated by means of retroreflecting material.
(3) Subject to paragraph (4), the parts of the roundel coloured yellow shall be fluorescent.
(4) With the exception of the parts coloured black and any perimeter strip, the roundel shall be illuminated by means of retroreflecting material, but retroreflecting material applied to the parts coloured yellow shall, if that material is not fluorescent, be applied in horizontal strips with gaps between the strips.
(5) The parts of the roundel coloured red may be fluorescent.
Signed by authority of the Secretary of State
David Jamieson,
Parliamentary Under Secretary of State, Department for Transport
5th December 2002
[2] Part I of S.I. 1994/1519, to which there are amendments not relevant to these Regulations.back